IndustrialNet Category 5e SF/UTP Copper Cable SPECIFICATION SHEET specifications Category 5e 4-pair SF/UTP copper cable shall meet or exceed the IEC IndustrialNet Category 5e 61156-6, ANSI/TIA-568-C.2 Category 5e and ODVA Ethernet/IP and SF/UTP Copper Cable CC-Link standards up to 80 meters. The stranded copper conductors shall be 24/7 AWG with high density polyethylene (HDPE) insulation. The copper CMX/CM 4-pair: ISFCH5C04A*-XG conductors shall be twisted in pairs and wrapped with a foam polypropylene tape to form a core. All pairs shall then be surrounded by an overall braided IndustrialNet Category 6/5e shield and metallic foil and covered with a thermoplastic elastomer (TPE) RJ45 Field Terminable Plug jacket. The jacket shall be oil, UV, weld splatter, and abrasion resistant for Field enhanced chemical resistance and mechanical performance. The jacket shall be flame retardant (CMX/CM) for Industrial Ethernet applications. This cable terminable plug: ISPS688FA shall support high-flex applications and be rated for 600 V panel or on-machine applications where space is shared with high voltage cables. IndustrialNet Category 5e Shielded 600 V-Rated Patch Cords technical information CM/CMX: **ISTPHCH1MTL Electrical performance: Certified component performance up to 80 meters and meets or exceeds the requirements IEC 61156-6 Category 5e, ANSI/TIA-568-C.2 Category IndustrialNet M12 D-Code to 5e and ODVA Ethernet/IP and CC-Link standards at swept frequencies RJ45 Panel Mount Adapter up to 100 MHz Standard compliances: UL AWM Style 2463 (80C 600 V) Panel Flex Life Test: 1 million cycles at 10 x cable diameter 10 million cycles mount adapter: ICAM12DRJS at 20x cable diameter Torsion Life Test: 3 million cycles, 360 Mini-Com Modular Patch Panel Oil resistance 6 months 20C 8-port: CDPP8RG Conductors/insulators: Four pairs of 24/7 AWG stranded copper insulated with high density polyethylene (HDPE) insulation DIN Rail Adapter Insulation diameter: 1.12 1.22mm (0.044 0.048 in.) 1-port: CADIN1IW*** Flame rating: CMX/CM (UL1685) Installation tension: 110 N (25 lbf) maximum *To designate color, add suffix TL (Teal), BL (Black), RD (Red), BU (Blue), GY (Gray), Temperature rating: -40C to 80C (-40F to 176F) during transport, installation, and operation or YL (Yellow). **For other lengths, change the length Cable jacket: Thermoplastic elastomer (TPE), oil, sunlight, weld splatter, and designation (1M) of the part number to the abrasion resistant desired length (0.3M, 0.6M, 2M, 3M, 5M, or Cable diameter: 7.2mm (0.285 in.) nominal 10M) to designate color, replace TL (Teal) suffix with BL (Black), RD (Red), or YL (Yellow). Cable weight: 18 kg/305m (40 lbs./1000 ft.) For example, the part number for a 2-meter teal patch cord is ISTPHCH2MTL. Packaging: Packaged 305 meters (1000 feet) on a reel *** For standard colors other than Off White, Package tested to ISTA Procedure 1A replace IW in part number with BL (Black), EI (Electric Ivory), IG (International Gray), key features and benefits or WH (White). EtherNet/IP is a trademark of ODVA. Third party tested Cable has been tested by an independent laboratory and complies with the electrical standard requirements of IEC 61156-6 Category 5e and ANSI/TIA-568-C.2 Category 5e standards Reliability Shielded SF/UTP cable construction protects against environmental elements that can cause electrical performance failures stranded conductors for high flex applications and ease of installation cable jacket is oil, sunlight, weld splatter, and abrasion resistant for enhanced chemical resistance and mechanical performance High flex applications Life cycle tested for robotic and c-track use 600 V on-machine Rated for panel or on-machine applications when the space is shared with applications 600V high voltage power cables applications IndustrialNet Category 5e SF/UTP Copper Cable Key applications include: provides reliability and high performance as an 10BASE-T (Ethernet) integral component of the end-to-end solution for 100BASE-T (Fast Ethernet) industrial Ethernet based communications networks. 1000BASE-T (Gigabit Ethernet) The 4-pair high performance cable ensures highest Industrial Ethernet/IP availability in conditions seen in industrial Control panel deployments featuring power source environments. The cable incorporates a durable oil voltages and UV resistant TPE jacket meeting Appliance Downlinks from control panel to the Wiring Material requirements and rated for panel or machine area on-machine applications when the space is shared Uplinks featuring gigabit data transmission with 600V high voltage power cables. from the control panel to the consolidation point High flex applications Robotic, C-Track www.panduit.com IndustrialNet Category 5e SF/UTP Copper Cable additional specifications Mechanical Test Ultimate Breaking Strength >400 N (90 lbf.) Minimum Bend Radius 2x cable diameter Electrical Test Nominal Velocity of Propagation (NVP) 68% 80V Operating Voltage, Maximum cable construction Stranded Conductor Wire Conductor Insulator Foam Tape Cable Shield Screen Foil Shield Jacket WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2018 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. iai panduit.com COSP347--WW-ENG 5/2018