IndustrialNet Category 5e Solid Conductor UTP Copper Cable SPECIFICATION SHEET specifications Category 5e 4-pair UTP copper cable shall meet or exceed the IndustrialNet Category 5e UTP ANSI/TIA-568-C.2 Category 5e and ODVA EtherNet/IP standards. The Copper Cable cable shall be power limited tray cable (PLTC). The solid copper conductors shall be 22 AWG with high density polyethylene (HDPE) insulation. The CMX Outdoor/ IURHT5C04BL-UG copper conductors shall be twisted in pairs and wrapped with a foam CMR 4-pair: polypropylene tape to form a core. All pairs shall then be covered with IndustrialNet Category 6A/6/5e an industrially rated black PVC jacket which shall be oil and sunlight RJ45 Field Terminable Plug resistant and flame retardant to CMX Outdoor/CMR for industrial Ethernet applications. This cable shall be rated for panel or on-machine applications Field where space is shared with 600V high voltage cables. terminable plug: ISPS688FA IndustrialNet M12X-Code technical information Field Terminable Plug Category 5e component Exceeds the requirements of ANSI/TIA-568-C.2 Category 5e Field performance up to 100 meters: and ODVA EtherNet/IP standards at swept frequencies up to terminable plug: ISPS6A88MFA 100 MHz Electrical performance: Meets all ODVA EtherNet/IP performance requirements IndustrialNet Category 5e Shielded 600V Rated Patch Cords Standard compliances: UL AWM Style 2570 (80C 600V), UL 13 PLTC, Oil Res and Sun Res, UL 444 Sun Res, UL 1666 CMR CM/CMX: ISTPHCH1MTL* RoHS compliance: Compliant (EU DIRECTIVE 2011/65/EU) IndustrialNet M12 D-Code to RJ45 Panel Mount Adapter Conductors/insulators: Four pairs of 22 AWG solid copper insulated with high density polyethylene (HDPE) insulation Panel mount adapter: ICAM12DRJS Insulation diameter: 1.07 1.32mm (0.042 - 0.052 in.) Flame rating: CMX Outdoor/CMR IndustrialNet DIN Rail Mount Patch Panel Installation tension: 110 N (25 lbf) maximum Temperature rating: -20C to 75C (-4F to 167F) during transport, installation 8-port: CDPP8RG and operation Mini-Com DIN Rail Mount Adapter Cable jacket: Oil and sunlight resistant PVC 1-port: CADIN1IW** Cable diameter: 7.9mm (0.311 in.) Cable weight: 14kg/305m (38 lbs./1000 ft.) *For other lengths, change the length Packaging: Packaged 305 meters (1000 feet) on a reel designation (1M) of the part number to the Package tested to ISTA Procedure 1A desired length (0.3M, 0.6M, 2M, 3M, 5M, or 10M) to designate color, replace TL (Teal) key features and benefits suffix with BL (Black), RD (Red), or YL (Yellow). For example, the part number for a Third party tested: Provides confidence that the cable delivers Category 5e 2-meter teal patch cord is ISTPHCH2MTL. performance for the 100 meter channel **For standard colors other than Off White, Power Limited Tray Cable Can be used for Class 1 Div 2 hazardous location applications (PLTC) approved: replace IW in part number with BL (Black), EI (Electric Ivory), IG (International Gray), or WH Oil and sunlight performance Delivers enhanced chemical resistance and mechanical (White). rated cable jacket: performance EtherNet/IP compliant design: Provides performance levels required to support industrial network applications 600V rated jacket: Approved for control panel or on-machine applications when the space is shared with 600V high voltage power cables, required for UL 508A applications IndustrialNet Category 5e Solid Conductor UTP applications when the space is shared with 600V Copper Cable provides reliability and high high voltage power cables, IndustrialNet performance as an integral component of the Category 5e Solid Conductor UTP Copper Cable end-to-end solution for industrial Ethernet based is ideal for control panel deployments featuring communications networks. The PLTC compliant power source voltages. Category 5e rated cable cable with oil and UV resistant PVC jacket is suitable for transmission of high performance withstands harsh industrial conditions such as oil 10BASE-T, 100BASE-T and 1000BASE-T uplinks rigs and other hazardous Class 1 Div 2 featuring up to gigabit data transmission from the environments. Rated for panel or on-machine control panel to the consolidation point. www.panduit.com/ia IndustrialNet Category 5e Solid Conductor UTP Copper Cable additional specifications Mechanical Test Maximum Pulling Force 178N (40 lbf.) Minimum Bend Radius 31mm (1.2in.) Electrical Test Nominal Velocity of Propagation (NVP) 70% 80V Operating Voltage, Maximum IURHT5C04BL Cable Cross-Section Jacket Conductor Insulation Conductor WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2017 Panduit Corp. Visit us at www.panduit.com/ia ALL RIGHTS RESERVED. iai panduit.com COSP405--WW-ENG 3/2017