Product Bulletin
J-Pro Cable Support System J-Pro Cable Support System
Tak-Ty Hook & Loop Cable Tie for use with the J-Pro Cable Support System
Max. Min. Loop
Bundle Tensile
Std. Std.
Length Width Diameter Strength
Pkg. Ctn.
Part Number In. mm In. mm In. mm Lbs. N Qty. Qty.
UL Listed Strip Ties (Maroon) for Plenum Applications
J-Pro Cable Support System
JP2SBC50RB-L20 JP2SBC87RB-L20 JP2ZP-L20 JP2CP-L20
HLSP3S-X12 12.00 305.0 0.75 19.1 3.20 81.0 50 222 10 100
Let Panduit Support Your Cables
HLSP5S-X12 18.00 457.0 0.75 19.1 5.00 127.0 50 222 10 100
Screw-On Beam Clamps UL Listed Strip Ties (Black) for Plenum Applications
The J-Pro Cable Support System is designed to
Max. Bundle
Underfloor (Plenum Application) HLSP3S-X0 12.00 305.0 0.75 19.1 3.20 81.0 50 222 10 100
provide a competitive alternative to metal J hooks
Capacity
Max. Cable Capacity*
HLSP3S-X12
HLSP5S-X0 18.00 457.0 0.75 19.1 5.00 127.0 50 222 10 100
for routing cables throughout the physical infrastructure.
Std.
Category Category Category
Pkg.
Part
6A-SD/6A 6 5e
This system provides complete bend radius control and
Part Number Description In. mm Material** Qty.
(0.30") (0.24") (0.23")
includes many easy to use mounting options to provide
JP2SBC50-L20
JP75SBC50-L20 0.75 19.0 5 8 10 50 Cable Bundle Organizing Tool
J hook with
the lowest installed cost. The selection of multiple sizes,
screw-on beam
JP131SBC50-L20 1.31 33.3 15 25 29 50
Recommended for Std. Std.
clamp for use colors, and pre-riveted J hook assemblies meet the
Cable Outer Use the Pkg. Ctn.
with flanges up to
JP2SBC50-L20 2.00 50.8 30 46 55 50
requirements of a wide variety of applications and
1/2" (12.7mm) thick.
Part Number Description Diameter Range Following Insert Qty. Qty.
Non-rotating mount.
JP4SBC50-X20 4.00 101.6 115 180 200 10
are suitable for use in air handling spaces.
CBOT24K Kit contains two organizing 0.180" 0.248" Fluorescent Green 1 10
inserts, insert clamp, and (4.57mm 6.30mm)
JP75SBC50RB-L20 0.75 19.0 5 8 10 50
J hook with
hook & loop fastener.
screw-on beam
Available in four sizes and select colors
0.230" 0.310" Fluorescent Yellow
JP131SBC50RBL20 1.31 33.3 15 25 29 50
clamp for use with
JP2SBC50RB-L20
(5.84mm 7.87mm)
flanges up to
JP2SBC50RB-L20 2.00 50.8 30 46 55 50
1/2" (12.7mm) thick.
Rotates 360 de-
Note: Performance testing of organized bundles was completed using Panduit cable.
Nylon 6.6
JP4SBC50RB-X20 4.00 101.6 115 180 200 10
grees.
Arranges up to 24 cables to
J hook
with metal optimize bundle diameter and
JP75SBC87-L20 0.75 19.0 5 8 10 50
J hook with
attachments
improve installed appearance.
screw-on beam
JP131SBC87-L20 1.31 33.3 15 25 29 50
clamp for use
with flanges up to
JP2SBC87-L20 JP2SBC87-L20 2.00 50.8 30 46 55 50
3/4" (19.1mm) thick.
Non-rotating
JP4SBC87-X20 4.00 101.6 115 180 200 10
mount.
JP75SBC87RB-L20 0.75 19.0 5 8 10 50
J hook with
screw-on beam
JP131SBC87RBL20 1.31 33.3 15 25 29 50 JP75 Series JP131 Series JP2 Series JP4 Series
clamp for use with
flanges up to
JP2SBC87RB-L20 2.00 50.8 30 46 55 50
3/4" (19.1mm) thick.
Rotates 360 de-
Key Features Benefits
JP4SBC87RB-X20 4.00 101.6 115 180 200 10
grees.
JP2SBC87RB-L20
Multiple size J hooks Available in 3/4", 1 5/16", 2", and 4" bundle capacities to meet requirements
Purlin Clips
of a variety of applications throughout the physical infrastructure
JP75ZP-L20 0.75 19.0 5 8 10 50
Complete horizontal and vertical Helps prevent degradation of cable performance
J hook with
JP131ZP-L20 1.31 33.3 15 25 29 50
z-purlin Prevents pinch points that could cause damage to cable
1" bend radius control
clip for use
with angled
JP2ZP-L20 2.00 50.8 30 46 55 50
UL 2043 and Suitable for use in air handling spaces
flanges up to 1/4"
Listed within UL file number E136577
(6.4mm) thick.
CAN/ULC S102.2 listed
Nylon 6.6
JP4ZP-X20 4.00 101.6 115 180 200 10
Listed within ULC file number R21673
J hook
with metal
JP75CP-L20 0.75 19.0 5 8 10 50
Color options
Provide means to segregate and identify cable bundles for specific
JP2ZP-L20
attachments
J hook with
applications, such as data, voice, security, fire alarm, or other applications that
JP131CP-L20 1.31 33.3 15 25 29 50
c-purlin
require a designated pathway
clip for use
with vertical
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
JP2CP-L20 2.00 50.8 30 46 55 50
Pre-riveted assemblies Allow for attachment to ceilings, beams, threaded rods, drop wires,
flanges up to 1/4"
and underfloor supports to meet requirements of a variety of applications
(6.4mm) thick. PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD.
JP4CP-X20 4.00 101.6 115 180 200 10
Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia
cs-cdn@panduit.com cs-emea@panduit.com cs-ap@panduit.com cs-japan@panduit.com cs-la@panduit.com cs-aus@panduit.com Cable tie channel
Allows user to install 3/4" Tak-Ty Cable Tie and provides a method to retain and
*The above cable diameters represent the nominal Panduit cable diameter per performance level.
Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020
manage cable bundles
For specific cable fill information based on specific part numbers, please contact customer service.
**Suitable for use in air handling spaces in accordance with Sec. 300.22(C) and (D) of the National Electrical Code when mounted
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
Non-metallic J hook Prevents cables from coming in contact with metal
as single units or in pairs. JP4 family of parts suitable for use in single unit configurations only .
JP2CP-L20
Listed in accordance with CAN/ULC S102.2 when mounted as single units or in pairs. Minimum spacing of 4' (1220mm)
For more information
2015 Panduit Corp.
required between mount points. (Flame Spread Rating = 0, Smoke Developed Classification = 20)
ALL RIGHTS RESERVED.
Visit us at www.panduit.com
Product Bulletin Number WACB23--SA-ENG
Contact Customer Service by email: cs@panduit.com
Replaces WW-WACB15
or by phone: 800.777.3300 12/2015 www.panduit.com
J-Pro Cable Support System J-Pro Cable Support System J-Pro Cable Support System
Color Selection Guide
Base
Part Number Black Red Blue White Green Orange
JP75W -L20 -L2 -L5 -L3
JP75WP2B -L20
JP75CMB -L20 -L2
JP75DW -L20 -L2 -L6
JP75ZP -L20
JP2W-L20 JP2WP2B-L20 JP2CMB-L20 JP2DW-L20
JP75CP -L20
JP2HBC25RB-L20 JP2UF100-L20
JP75SBC50 -L20
JP75SBC87 -L20
Ordering Information
JP75SBC50RB -L20 -L2 -L
Hammer-On Beam Clamps
JP75SBC87RB -L20
Max. Bundle
JP75HBC25RB -L20
Capacity Max. Cable Capacity*
Wall Mount
JP75HBC50RB -L20 -L2 -L
Max. Bundle Std.
Category Category Category
JP75HBC75RB -L20
Capacity Max. Cable Capacity*
Pkg.
Std. 6A-SD/6A 6 5e
JP75UF100 -L20
Part Number Part Description In. mm (0.30") (0.24") (0.23") Material** Qty.
Pkg.
Category 6A-SD/6A Category 6 Category 5e
JP131W -L20 -L6 -L5 -L3
Qty.
Part Number Part Description In. mm (0.30") (0.24") (0.23") Material**
JP75HBC25RB-L20 0.75 19.0 5 8 10 50
JP131WP2B -L20
JP75W-L20 0.75 19.0 5 8 10 50
J hook with hammer- JP131CMB -L20
JP131HBC25RBL20 1.31 33.3 15 25 29 50
J Hook for wall mount
on beam clamp for
JP131DW -L20 -L6
applications. One
JP131W-L20 1.31 33.3 15 25 29 50
use with flanges
JP131ZP -L20
1/4" (M6) mounting
1/8" 1/4"
JP2HBC25RB-L20 2.00 50.8 30 46 55 50
hole for user supplied Nylon 6.6
JP131CP -L20
(3.2mm 6.4mm) thick.
JP2W-L20 2.00 50.8 30 46 55 50
fastener. Not for use JP2HBC25RB-L20
Rotates 360 degrees.
JP131SBC50 -L20
with powder JP4HBC25RB-X20 4.00 101.6 115 180 200 50
JP2HBC50RB-L20
JP131SBC87 -L20
actuated fasteners.
JP4W-X20 4.00 101.6 115 180 200 50 JP2HBC75RB-L20
JP2W-L20
JP131SBC50RB -L20 -L2 -L
JP75HBC50RB-L20 0.75 19.0 5 8 10 50
JP131SBC87RB -L20
Wall Mount with Bracket
J hook with hammer- JP131HBC25RB -L20
Nylon 6.6
JP131HBC50RBL20 1.31 33.3 15 25 29 50
JP75WP2B-L20 0.75 19.0 5 8 10 50 on beam clamp for
JP131HBC50RB -L20 -L2 -L
J hook
J Hook for powder
use with flanges
with metal
JP131HBC75RB -L20
actuated installation
5/16" 1/2" (7.9mm
JP2HBC50RB-L20 2.00 50.8 30 46 55 50
JP131WP2B-L20 1.31 33.3 15 25 29 50 attachments
on walls. One 5/32" Nylon 6.6 JP131UF100 -L20
12.7mm) thick.
(M4) mounting J Hook
Rotates 360 degrees.
JP2W -L20 -L2 -L6 -L -L5 -L3
JP4HBC50RB-X20 4.00 101.6 115 180 200 50
hole and one 1/4"
with metal
JP2WP2B-L20 2.00 50.8 30 46 55 50
JP2WP2B -L20
(M6) mounting
attachments
JP2CMB -L20 -L2
hole for user
JP75HBC75RB-L20 0.75 19.0 5 8 10 50
JP4WP2B-X20 4.00 101.6 115 180 200 50
supplied fasteners.
JP2DW -L20 -L2 -L6 -L
JP2WP2B-L20
J hook with hammer- JP2ZP -L20
JP131HBC75RBL20 1.31 33.3 15 25 29 50
on beam clamp for
Ceiling Mount
JP2CP -L20
use with flanges
JP2SBC50 -L20 -L
JP75CMB-L20 0.75 19.0 5 8 10 50
9/16" 3/4" (14.3mm
JP2HBC75RB-L20 2.00 50.8 30 46 55 50
JP2SBC87 -L20
19.1mm) thick.
J Hook with ceiling
Rotates 360 degrees.
JP2SBC50RB -L20 -L2 -L
JP131CMB-L20 1.31 33.3 15 25 29 50
mount bracket Nylon 6.6
JP4HBC75RB-X20 4.00 101.6 115 180 200 10
JP2SBC87RB -L20 -L2
that has one 3/16" J Hook
(M5), 1/4" (M6),
with metal JP2HBC25RB -L20
JP2CMB-L20 2.00 50.8 30 46 55 50
Underfloor Pedestal Clamp
and 3/8" (M10)
attachments
JP2HBC50RB -L20 -L2 -L
mounting hole.
JP75UF100-L20 0.75 19.0 5 8 10 50
JP2HBC75RB -L20
JP4CMB-X20 4.00 101.6 115 180 200 10
JP2CMB-L20 JP2UF100 -L20
Underfloor
JP131UF100-L20 1.31 33.3 15 25 29 50
Nylon 6.6 JP4W -X20 -X2 -X6 -X
Drop Wire and Threaded Rod Clip
Pedestal Support
J hook
JP4WP2B -X20
Clip for pedestal 7/8"
JP75DW-L20 0.75 19.0 5 8 10 50
with metal
JP2UF100-L20 2.00 50.8 30 46 55 50
JP4CMB -X20
square or 1 1/8" 1
J Hook with clip for
attachments
Nylon 6.6
3/8" in diameter.
JP4ZP -X20
use with #12 wire
JP131DW-L20 1.31 33.3 15 25 29 J Hook 50
JP4UF100-X20 4.00 101.6 115 180 200 10
JP2UF100-L20
and threaded rod JP4CP -X20
with metal
up to 3/8" (9.5mm)
JP4SBC50 -X20 -X
attachments
JP2DW-L20 in diameter. 2.00 50.8 30 46 55 50
*The above cable diameters represent the nominal Panduit cable diameter per performance level.
JP4SBC87 -X20
For specific cable fill information based on specific part numbers, please contact customer service.
JP4SBC50RB -X20 -X2 -X
**Suitable for use in air handling spaces in accordance with Sec. 300.22(C) and (D) of the National Electrical Code when mounted
*The above cable diameters represent the nominal Panduit cable diameter per performance level.
as single units or in pairs. JP4 family of parts suitable for use in single unit configurations only .
JP2DW-L20 JP4SBC87RB -X20
For specific cable fill information based on specific part numbers, please contact customer service.
Listed in accordance with CAN/ULC S102.2 when mounted as single units or in pairs. Minimum spacing of 4' (1220mm)
**Suitable for use in air handling spaces in accordance with Sec. 300.22(C) and (D) of the National Electrical Code when mounted
JP4HBC25RB -X20
required between mount points. (Flame Spread Rating = 0, Smoke Developed Classification = 20)
as single units or in pairs. JP4 family of parts suitable for use in single unit configurations only .
JP4HBC50RB -X20 -X2 -X
Listed in accordance with CAN/ULC S102.2 when mounted as single units or in pairs. Minimum spacing of 4' (1220mm)
required between mount points. (Flame Spread Rating = 0, Smoke Developed Classification = 20) JP4HBC75RB -X20
JP4UF100 -X20
Consult factory for additional colors available.