JP4W-X20 Panduit

Product Bulletin J-Pro Cable Support System J-Pro Cable Support System Tak-Ty Hook & Loop Cable Tie for use with the J-Pro Cable Support System Max. Min. Loop Bundle Tensile Std. Std. Length Width Diameter Strength Pkg. Ctn. Part Number In. mm In. mm In. mm Lbs. N Qty. Qty. UL Listed Strip Ties (Maroon) for Plenum Applications J-Pro Cable Support System JP2SBC50RB-L20 JP2SBC87RB-L20 JP2ZP-L20 JP2CP-L20 HLSP3S-X12 12.00 305.0 0.75 19.1 3.20 81.0 50 222 10 100 Let Panduit Support Your Cables HLSP5S-X12 18.00 457.0 0.75 19.1 5.00 127.0 50 222 10 100 Screw-On Beam Clamps UL Listed Strip Ties (Black) for Plenum Applications The J-Pro Cable Support System is designed to Max. Bundle Underfloor (Plenum Application) HLSP3S-X0 12.00 305.0 0.75 19.1 3.20 81.0 50 222 10 100 provide a competitive alternative to metal J hooks Capacity Max. Cable Capacity* HLSP3S-X12 HLSP5S-X0 18.00 457.0 0.75 19.1 5.00 127.0 50 222 10 100 for routing cables throughout the physical infrastructure. Std. Category Category Category Pkg. Part 6A-SD/6A 6 5e This system provides complete bend radius control and Part Number Description In. mm Material** Qty. (0.30 ) (0.24 ) (0.23 ) includes many easy to use mounting options to provide JP2SBC50-L20 JP75SBC50-L20 0.75 19.0 5 8 10 50 Cable Bundle Organizing Tool J hook with the lowest installed cost. The selection of multiple sizes, screw-on beam JP131SBC50-L20 1.31 33.3 15 25 29 50 Recommended for Std. Std. clamp for use colors, and pre-riveted J hook assemblies meet the Cable Outer Use the Pkg. Ctn. with flanges up to JP2SBC50-L20 2.00 50.8 30 46 55 50 requirements of a wide variety of applications and 1/2 (12.7mm) thick. Part Number Description Diameter Range Following Insert Qty. Qty. Non-rotating mount. JP4SBC50-X20 4.00 101.6 115 180 200 10 are suitable for use in air handling spaces. CBOT24K Kit contains two organizing 0.180 0.248 Fluorescent Green 1 10 inserts, insert clamp, and (4.57mm 6.30mm) JP75SBC50RB-L20 0.75 19.0 5 8 10 50 J hook with hook & loop fastener. screw-on beam Available in four sizes and select colors 0.230 0.310 Fluorescent Yellow JP131SBC50RBL20 1.31 33.3 15 25 29 50 clamp for use with JP2SBC50RB-L20 (5.84mm 7.87mm) flanges up to JP2SBC50RB-L20 2.00 50.8 30 46 55 50 1/2 (12.7mm) thick. Rotates 360 de- Note: Performance testing of organized bundles was completed using Panduit cable. Nylon 6.6 JP4SBC50RB-X20 4.00 101.6 115 180 200 10 grees. Arranges up to 24 cables to J hook with metal optimize bundle diameter and JP75SBC87-L20 0.75 19.0 5 8 10 50 J hook with attachments improve installed appearance. screw-on beam JP131SBC87-L20 1.31 33.3 15 25 29 50 clamp for use with flanges up to JP2SBC87-L20 JP2SBC87-L20 2.00 50.8 30 46 55 50 3/4 (19.1mm) thick. Non-rotating JP4SBC87-X20 4.00 101.6 115 180 200 10 mount. JP75SBC87RB-L20 0.75 19.0 5 8 10 50 J hook with screw-on beam JP131SBC87RBL20 1.31 33.3 15 25 29 50 JP75 Series JP131 Series JP2 Series JP4 Series clamp for use with flanges up to JP2SBC87RB-L20 2.00 50.8 30 46 55 50 3/4 (19.1mm) thick. Rotates 360 de- Key Features Benefits JP4SBC87RB-X20 4.00 101.6 115 180 200 10 grees. JP2SBC87RB-L20 Multiple size J hooks Available in 3/4 , 1 5/16 , 2 , and 4 bundle capacities to meet requirements Purlin Clips of a variety of applications throughout the physical infrastructure JP75ZP-L20 0.75 19.0 5 8 10 50 Complete horizontal and vertical Helps prevent degradation of cable performance J hook with JP131ZP-L20 1.31 33.3 15 25 29 50 z-purlin Prevents pinch points that could cause damage to cable 1 bend radius control clip for use with angled JP2ZP-L20 2.00 50.8 30 46 55 50 UL 2043 and Suitable for use in air handling spaces flanges up to 1/4 Listed within UL file number E136577 (6.4mm) thick. CAN/ULC S102.2 listed Nylon 6.6 JP4ZP-X20 4.00 101.6 115 180 200 10 Listed within ULC file number R21673 J hook with metal JP75CP-L20 0.75 19.0 5 8 10 50 Color options Provide means to segregate and identify cable bundles for specific JP2ZP-L20 attachments J hook with applications, such as data, voice, security, fire alarm, or other applications that JP131CP-L20 1.31 33.3 15 25 29 50 c-purlin require a designated pathway clip for use with vertical WORLDWIDE SUBSIDIARIES AND SALES OFFICES JP2CP-L20 2.00 50.8 30 46 55 50 Pre-riveted assemblies Allow for attachment to ceilings, beams, threaded rods, drop wires, flanges up to 1/4 and underfloor supports to meet requirements of a variety of applications (6.4mm) thick. PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. JP4CP-X20 4.00 101.6 115 180 200 10 Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Cable tie channel Allows user to install 3/4 Tak-Ty Cable Tie and provides a method to retain and *The above cable diameters represent the nominal Panduit cable diameter per performance level. Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 manage cable bundles For specific cable fill information based on specific part numbers, please contact customer service. **Suitable for use in air handling spaces in accordance with Sec. 300.22(C) and (D) of the National Electrical Code when mounted For a copy of Panduit product warranties, log on to www.panduit.com/warranty Non-metallic J hook Prevents cables from coming in contact with metal as single units or in pairs. JP4 family of parts suitable for use in single unit configurations only . JP2CP-L20 Listed in accordance with CAN/ULC S102.2 when mounted as single units or in pairs. Minimum spacing of 4 (1220mm) For more information 2015 Panduit Corp. required between mount points. (Flame Spread Rating = 0, Smoke Developed Classification = 20) ALL RIGHTS RESERVED. Visit us at www.panduit.com Product Bulletin Number WACB23--SA-ENG Contact Customer Service by email: cs panduit.com Replaces WW-WACB15 or by phone: 800.777.3300 12/2015 www.panduit.com J-Pro Cable Support System J-Pro Cable Support System J-Pro Cable Support System Color Selection Guide Base Part Number Black Red Blue White Green Orange JP75W -L20 -L2 -L5 -L3 JP75WP2B -L20 JP75CMB -L20 -L2 JP75DW -L20 -L2 -L6 JP75ZP -L20 JP2W-L20 JP2WP2B-L20 JP2CMB-L20 JP2DW-L20 JP75CP -L20 JP2HBC25RB-L20 JP2UF100-L20 JP75SBC50 -L20 JP75SBC87 -L20 Ordering Information JP75SBC50RB -L20 -L2 -L Hammer-On Beam Clamps JP75SBC87RB -L20 Max. Bundle JP75HBC25RB -L20 Capacity Max. Cable Capacity* Wall Mount JP75HBC50RB -L20 -L2 -L Max. Bundle Std. Category Category Category JP75HBC75RB -L20 Capacity Max. Cable Capacity* Pkg. Std. 6A-SD/6A 6 5e JP75UF100 -L20 Part Number Part Description In. mm (0.30 ) (0.24 ) (0.23 ) Material** Qty. Pkg. Category 6A-SD/6A Category 6 Category 5e JP131W -L20 -L6 -L5 -L3 Qty. Part Number Part Description In. mm (0.30 ) (0.24 ) (0.23 ) Material** JP75HBC25RB-L20 0.75 19.0 5 8 10 50 JP131WP2B -L20 JP75W-L20 0.75 19.0 5 8 10 50 J hook with hammer- JP131CMB -L20 JP131HBC25RBL20 1.31 33.3 15 25 29 50 J Hook for wall mount on beam clamp for JP131DW -L20 -L6 applications. One JP131W-L20 1.31 33.3 15 25 29 50 use with flanges JP131ZP -L20 1/4 (M6) mounting 1/8 1/4 JP2HBC25RB-L20 2.00 50.8 30 46 55 50 hole for user supplied Nylon 6.6 JP131CP -L20 (3.2mm 6.4mm) thick. JP2W-L20 2.00 50.8 30 46 55 50 fastener. Not for use JP2HBC25RB-L20 Rotates 360 degrees. JP131SBC50 -L20 with powder JP4HBC25RB-X20 4.00 101.6 115 180 200 50 JP2HBC50RB-L20 JP131SBC87 -L20 actuated fasteners. JP4W-X20 4.00 101.6 115 180 200 50 JP2HBC75RB-L20 JP2W-L20 JP131SBC50RB -L20 -L2 -L JP75HBC50RB-L20 0.75 19.0 5 8 10 50 JP131SBC87RB -L20 Wall Mount with Bracket J hook with hammer- JP131HBC25RB -L20 Nylon 6.6 JP131HBC50RBL20 1.31 33.3 15 25 29 50 JP75WP2B-L20 0.75 19.0 5 8 10 50 on beam clamp for JP131HBC50RB -L20 -L2 -L J hook J Hook for powder use with flanges with metal JP131HBC75RB -L20 actuated installation 5/16 1/2 (7.9mm JP2HBC50RB-L20 2.00 50.8 30 46 55 50 JP131WP2B-L20 1.31 33.3 15 25 29 50 attachments on walls. One 5/32 Nylon 6.6 JP131UF100 -L20 12.7mm) thick. (M4) mounting J Hook Rotates 360 degrees. JP2W -L20 -L2 -L6 -L -L5 -L3 JP4HBC50RB-X20 4.00 101.6 115 180 200 50 hole and one 1/4 with metal JP2WP2B-L20 2.00 50.8 30 46 55 50 JP2WP2B -L20 (M6) mounting attachments JP2CMB -L20 -L2 hole for user JP75HBC75RB-L20 0.75 19.0 5 8 10 50 JP4WP2B-X20 4.00 101.6 115 180 200 50 supplied fasteners. JP2DW -L20 -L2 -L6 -L JP2WP2B-L20 J hook with hammer- JP2ZP -L20 JP131HBC75RBL20 1.31 33.3 15 25 29 50 on beam clamp for Ceiling Mount JP2CP -L20 use with flanges JP2SBC50 -L20 -L JP75CMB-L20 0.75 19.0 5 8 10 50 9/16 3/4 (14.3mm JP2HBC75RB-L20 2.00 50.8 30 46 55 50 JP2SBC87 -L20 19.1mm) thick. J Hook with ceiling Rotates 360 degrees. JP2SBC50RB -L20 -L2 -L JP131CMB-L20 1.31 33.3 15 25 29 50 mount bracket Nylon 6.6 JP4HBC75RB-X20 4.00 101.6 115 180 200 10 JP2SBC87RB -L20 -L2 that has one 3/16 J Hook (M5), 1/4 (M6), with metal JP2HBC25RB -L20 JP2CMB-L20 2.00 50.8 30 46 55 50 Underfloor Pedestal Clamp and 3/8 (M10) attachments JP2HBC50RB -L20 -L2 -L mounting hole. JP75UF100-L20 0.75 19.0 5 8 10 50 JP2HBC75RB -L20 JP4CMB-X20 4.00 101.6 115 180 200 10 JP2CMB-L20 JP2UF100 -L20 Underfloor JP131UF100-L20 1.31 33.3 15 25 29 50 Nylon 6.6 JP4W -X20 -X2 -X6 -X Drop Wire and Threaded Rod Clip Pedestal Support J hook JP4WP2B -X20 Clip for pedestal 7/8 JP75DW-L20 0.75 19.0 5 8 10 50 with metal JP2UF100-L20 2.00 50.8 30 46 55 50 JP4CMB -X20 square or 1 1/8 1 J Hook with clip for attachments Nylon 6.6 3/8 in diameter. JP4ZP -X20 use with 12 wire JP131DW-L20 1.31 33.3 15 25 29 J Hook 50 JP4UF100-X20 4.00 101.6 115 180 200 10 JP2UF100-L20 and threaded rod JP4CP -X20 with metal up to 3/8 (9.5mm) JP4SBC50 -X20 -X attachments JP2DW-L20 in diameter. 2.00 50.8 30 46 55 50 *The above cable diameters represent the nominal Panduit cable diameter per performance level. JP4SBC87 -X20 For specific cable fill information based on specific part numbers, please contact customer service. JP4SBC50RB -X20 -X2 -X **Suitable for use in air handling spaces in accordance with Sec. 300.22(C) and (D) of the National Electrical Code when mounted *The above cable diameters represent the nominal Panduit cable diameter per performance level. as single units or in pairs. JP4 family of parts suitable for use in single unit configurations only . JP2DW-L20 JP4SBC87RB -X20 For specific cable fill information based on specific part numbers, please contact customer service. Listed in accordance with CAN/ULC S102.2 when mounted as single units or in pairs. Minimum spacing of 4 (1220mm) **Suitable for use in air handling spaces in accordance with Sec. 300.22(C) and (D) of the National Electrical Code when mounted JP4HBC25RB -X20 required between mount points. (Flame Spread Rating = 0, Smoke Developed Classification = 20) as single units or in pairs. JP4 family of parts suitable for use in single unit configurations only . JP4HBC50RB -X20 -X2 -X Listed in accordance with CAN/ULC S102.2 when mounted as single units or in pairs. Minimum spacing of 4 (1220mm) required between mount points. (Flame Spread Rating = 0, Smoke Developed Classification = 20) JP4HBC75RB -X20 JP4UF100 -X20 Consult factory for additional colors available.