NOTES: THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. J 1. MATERIAL: E C BODY - ALUMINUM, TIN PLATED SCREW - ALUMINUM, TIN PLATED (NOTE: LAMA6-14-QY & LAMA2-14-QY HAVE TIN PLATED STEEL SCREWS) 2. cULus LISTEDFOR USE UP TO 600V & TEMPERATURE RATED 90 C (AL9CU) F 3. DUAL RATED FOR USE WITH COPPER OR ALUMINUM STRANDED CODE CONDUCTOR D 4. THESE PARTS ARE RoHS COMPLIANT B 5. USE OF OXIDE INHIBITING JOINT COMPOUND LIKE PANDUIT CMP-100 RECOMMENDED FOR PAD TO PAD AND CONDUCTOR SURFACES G RAD A STUD SIZE 6. SEE PACKAGING LABEL FOR TIGHTENING TORQUE INFORMATION 7. PKG QTY: Q = 25 A DIMENSIONSIN mm I PART WIRERANGE WIRESTRIP STUDSIZE HEXKEY* NUMBER COPPER/ALUMINUM LENGTHIN mm IN AB C D E F G LAMA614QY 14AWG6AWG .38 9.7 1/4 .25 6.4 1.06 27.0 .38 9.7 .09 2.4 .50 12.7 .50 12.7 .43 10.9 SLOTTED G LAMA214QY 14AWG2AWG .47 11.9 1/4 .31 7.9 1.16 29.5 .47 11.9 .10 2.5 .50 12.7 .55 14.0 .38 9.7 SLOTTED F LAMA1/014QY 14AWG1/0AWG .62 15.7 1/4 .42 10.7 1.47 37.3 .62 15.7 .19 4.8 .62 15.7 .79 20.0 .43 10.9 SLOTTED E LAMA1/056Q14AWG1/0AWG .62 15.7 5/16 .25 6.4 1.47 37.3 .62 15.7 .19 4.8 .62 15.7 .79 20.0 .60 15.2 SLOTTED D LAMA2/014QY 14AWG2/0AWG .62 15.7 1/4 .44 11.2 1.47 37.3 .62 15.7 .19 4.8 .62 15.8 .79 20.0 .41 10.4 3/16 C LAMA25056QY 6AWG250kcmil 1.00 25.4 5/16 .45 11.5 2.01 51.0 1.00 25.4 .25 6.4 1.00 25.4 1.13 28.6 .56 14.2 5/16 B * HEX SIZE MAY DIFFER FROM CHART. DIFFERENCE IN SIZE WILL NOT AFFECT FIT, FORM, OR FUNCTION OF PART 10N006AR-NC/00B H J. REVISED NOTES 10 10N006AR-NC FLD FLD 9/10 JHNU JHNU CORP. TINLEY PARK, ILLINOIS I. REMOVED FIGURE NO. COLUMN H. REVISED DWG NUMBER: 10N006AR-NC WAS C41566 LAMA SERIES 6AWG THRU 250kcmil G.REVISED LAMA6-14-QY DIM: E WAS .38 F. REVISED LAMA2-14-QY DIM S: A WAS .32, D WAS .09, F WAS .56, G WAS .37 ALUMINUM MECHANICAL LUGS E. REVISED LAMA1/0-14-QY DIM S: WIRE STRIP LENGTH WAS .63, A WAS .44, C WAS .63, CUSTOMER DRAWING F WAS .81, G WAS .40 UNLESS OTHERWISE SPECIFIED D. REVISED LAMA1/0-56-Q DIM S: WIRE STRIP LENGTH WAS .63, C WAS .63, E WAS .63, 09 JHNU JHNU 10N006AR-NC FLD FLD 7/10 UNLESS OTHERWISE SPECIFIED, F WAS .78, G WAS .59 DIMENSIONAL TOLERANCES ARE: ALL DIMENSIONS ARE GIVEN IN C. REVISED LAMA 2/0-14-QY DIM S: WIRE STRIP LENGTH WAS .63, C WAS .63, F WAS .81, (.X) (.XXX) --- --- INCHES, THIRD ANGLE PROJECTION G WAS .40, HEX KEY WAS SLOTTED (.XX) AN--- GLES --- B. REVISED LAMA250-56-QY DIM S: A WAS .44, B WAS 2.00, D WAS .22, E WAS .90, DRAWN BY SCALE MAT L: F WAS 1.06, HEX KEY WAS 3/8 NONE JHNU A. REMOVED TORQUE COLUMN FROM TABLE DATE DRAWING NO / CAD FILE DWG 08 ADDED LAMA1/0-56 TO DRAWING 9/09 JHNU JHNU SEE NOTES 2/06 B CHK D 10N006AR-NC REV DATE BY CHK ECN -R SUP DESCRIPTION SIZE H C USX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Terminals category: Click to view products by Panduit manufacturer: Other Similar products are found below : 00-054007-01074-6 00-054007-70206-1 00-054007-70210-8 00-054007-70217-7 00-054007-70226-9 00-054007-70228-3 00-054007-70248- 1 00-054007-70256-6 00-054007-70301-3 00-054007-70316-7 0-0320562-0 00-054007-49560-4 00-054007-70209-2 00-054007-70225-2 00-054007-70227-6 00-054007-70231-3 00-054007-70241-2 00-054007-70242-9 00-054007-70244-3 00-054007-70246-7 00-054007-70263- 4 00-054007-70288-7 00-054007-70290-0 00-054007-70300-6 00-054007-70304-4 01-2065-1-0216 01-2900-1-04412 00581P0075 600TS- 10 60205-1 604200-1 605601-1 60598-1-CUT-TAPE 61314-6-C 61810-3 61-S 61-SN 626-0194 62-NBM-A 62-SN 62-SP 63-S 640179- 1 M55155/059I03 M55155/079C01 M55155/099H02 M55155/109H01 M55155/109H02 M55155/12XH05 M55155/16XH02