18900 Panduit Drive TDS: Metal Marking Tinley Park, IL 60487 Plates Customer Service: 800-777-3300 09MAR18 Effective Date: 0 Revision: Technical Data Sheet Panduit Stainless Steel Marker Plates and Tags This specification is intended to outline the physical and chemical properties of PANDUITs stainless steel marker plates and tags and include the following material identifiers: Part Number Prefixes MMP* MT* PRODUCT SPECIFICATIONS: Description: Material is RoHS compliant (European Union directive 2002/95/EC). Panduit stainless steel marker plates and tags provide permanent identification of pipes conduits, valves, cables and equipment in harsh environments. These marker plates and tags deliver long life when exposed to chemicals, vibrations, radiation, weathering and extreme temperatures Material: 304 and 316 grade stainless steel. Marking Method: Embossed and Laser Etched. Thickness: 0.010 inch, 0.015 inch and 0.035 inch Service Temperature Range: -112F to 1000F (-80C to 538C) Storage Conditions: Store at 70F (21C) and 50% Relative Humidity. PERFORMANCE PROPERTIES: Embossed and laser etched marker plates and tags were tested for their performance properties. Unless otherwise noted results are for both marking methods. PROPERTIES TEST METHOD PERFORMANCE UV Resistance 1000 hours in Fluorescent UV No visible change observed Weatherometer ASTM G154 Weatherability 1000 hours in Xenon Arc Weatherometer, No visible change observed ASTM G155, Cycle 1 0 0 High Service Temperature 30 days at 538 C(1000 F) Discoloration observed but markings still legible 0 0 Low Service Temperature 30 days at -80 C(-112 F) No visible change observed Salt Fog Resistance 2000 hours in 5% salt fog solution chamber No visible change observed ASTM B117 Boiling Water Resistance Soaked in boiling water for 1 hour No visible change observed Flame Resistance Heated to cherry red Discoloration observed but markings still legible Liquid Nitrogen Resistance Dipped in liquid nitrogen for 20 minutes No visible change observed Thermal Cycle Resistance Heated to cherry red and then dipped in Discoloration observed but liquid nitrogen markings still legible Page 1 of 2 2018 PANDUIT Corp TDS: Metal Marking Plates 18900 Panduit Drive TDS: Metal Marking Tinley Park, IL 60487 Plates Customer Service: 800-777-3300 09MAR18 Effective Date: 0 Revision: Technical Data Sheet CHEMICAL RESISTANCE TEST: Embossed and laser etched marker plates and tags were tested for their chemical resistance properties. Unless otherwise noted results are for both marking methods. CHEMICAL 1 hour immersion 24 hour immersion 7 day immersion Water NC NC NC Isopropyl Alcohol NC NC NC Ethanol NC NC NC Gasoline NC NC NC Mineral Spirits NC NC NC Skydrol NC NC NC Motor Oil NC NC NC Acetone NC NC NC Methyl Ethyl Ketone NC NC NC Xylene NC NC NC 25% Sodium Hydroxide NC NC NC 20% Ammonium Hydroxide NC NC NC 37% Hydrochloric Acid Discolored but Discolored but markings Material Disintegrates markings still legible still legible 50% Sulfuric Acid Discolored but Embossed marking Embossed marking markings still legible discolored but legible. discolored but legible. Laser etched marking is Laser etched marking illegible is illegible Glacial Acetic Acid NC NC NC NC = No Change LIMITED WARRANTY All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and manufacturer. NEITHER PANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER. THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. Page 2 of 2 2018 PANDUIT Corp TDS: Metal Marking Plates