18900 Panduit Drive TDS: GMPO5 Tinley Park, IL 60487 Effective Date: 17Jul12 Customer Service: 800-777-3300 Revision: 3 Technical Data Sheet Laser/Inkjet Printable Polyolefin Film This specification is intended to outline the physical and chemical properties of PANDUITs pressure sensitive laser and inkjet printable polyolefin material and include the following part numbers and printable material identifiers: Part Number Prefixes Printable Material Suffixes JL*PO JLEFPS-* FJJ LJL*PO-TL JLEFPD-* PLL-*-PO-* CPPLF-S EFPL-1 JLCPL-* PRODUCT SPECIFICATIONS: Description: Material is RoHS compliant (European Union directive 2002/95/EC). Material is top coated to provide a laser/inkjet printable surface. Print Methods: This material is recommended for laser and inkjet printing. Adhesive: Acrylic based, pressure sensitive permanent adhesive. Standard Colors: White opaque matte Thickness: 4.5 +/- 0.6 mils (substrate and adhesive) Service Temperature Range: -40F to 180F (-40C to 82C) Minimum Application Temperature: -10F to 90F (-23C to 32C) Storage Conditions: Store at 70F (21C) and 50% Relative Humidity. PROPERTIES: PERFORMANCE: Peel Adhesion to Stainless Steel: 30 oz/in width minimum (PSTC-101, 15 min. dwell) Shear Adhesion: 2 hours minimum (PSTC-107, Procedure A) Tensile Strength: MD: minimum 7500 PSI (PSTC-131) TD: minimum 13000 PSI (PSTC-131) UV Resistance: *3000 hours no change observed (ASTM G154) Elevated Temperature Exposure: After 8 hours at 100F (37.8C) there was no deterioration of the substrate *3000 hours equates to 5 years of assimilated outdoor UV exposure. Page 1 of 2 2007 PANDUIT Corp TDS: GMPO5 18900 Panduit Drive TDS: GMPO5 Tinley Park, IL 60487 Effective Date: 17Jul12 Customer Service: 800-777-3300 Revision: 3 Technical Data Sheet CHEMICAL/SOLVENT RESISTANCE: Samples were laser and inkjet printed. These samples were laminated to flat steel panels. The test was conducted at room temperature after 24 hour dwell. The samples were then immersed in the specified reagents for 5 immersions using the following cycle: a 10 minute immersion time followed by a 30 minute recovery time. After the fifth immersion, the samples were rubbed 10 times with a lint free gauze. Visual observations were noted for any adhesive bleed, print smear or loss of legibility. Chemical Reagent Visual Observation Distilled Water No effect Mineral Spirits Slight adhesive bleed Toluene Slight adhesive bleed Isopropyl alcohol Loss of print legibility Methanol Loss of print legibility Acetone No effect Methyl Ethyl Ketone No effect 1,1,1 Trichloroethane No effect Freon TF No effect Super Agitene No effect Jet A Fuel No effect Arco Truslide 68 No effect SAE 30 Motor Oil No effect 10% Nitric Acid No effect PSTC: Pressure Sensitive Tape Council ASTM: American Society for Testing and Materials (U.S.A.) LIMITED WARRANTY All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and manufacturer. NEITHER PANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER. THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. Page 2 of 2 2007 PANDUIT Corp TDS: GMPO5