PFX-0 Panduit

LC Fiber Optic Connectors Field Polish Termination - Singlemode and Multimode Panduit Corp. 2018 INSTALLATION INSTRUCTIONS FS119A READ ALL INSTRUCTIONS COMPLETELY BEFORE PROCEEDING COMPONENT IDENTIFICATION CONNECTOR ASSEMBLY Jacketed Boot Crimp Sleeve with heat shrink tubing Connector Body Dust cap SIMPLEX 900m Boot Backbone DUPLEX Duplex Clip ITEMS REQUIRED FOR TERMINATION ITEM PART NUMBER DESCRIPTION 1CST-115 Fiber Cable Jacket Stripper 2 FALC Alcohol Bottle (empty) 3 FBFSP Fiber Buffer Stripper 4 FLPT LC Crimp Tool 5FSCRIBE Carbide Scribe 6 FGLSSafety Glasses 7 FLCPK LC Polishing Puck (1.25mm Ferrule) 8 FJPMR Primer 9 FJPXY Anaerobic Adhesive FHSCT (or) Heat Shrink Curing Tool (110VAC / 60Hz for 1.6mm/2.0mm installation) 10 FHSCT-W Heat Shrink Curing Tool (230VAC / 50Hz for 1.6mm/2.0mm installation) 11 FKS Aramid Yarn Shears 12 FPP5-L 5m Polishing Film (Aluminum Oxide) 13 FPF1-V 1m Diamond Polishing Film 14 FLCPAD 85 Durometer Polishing Pad 15 FSCDVR Screwdriver 16 FSCOPE 200x Microscope 17 FLCASCP 1.25mm Adapter for FSCOPE 18 FSTY Safety Stickers for fiber scraps 19 FSWB-C Cleaning Swabs 20 FSYR-X Syringes with needle tips 21 FTWZR Tweezers 22 FWP-C Cloth Wipes 23 PFX-0 Indelible Ink Marking Pen 24 FLOUPEX10 Eye Loupe 10X Power 25 -- Isopropyl Alcohol (Reagent Grade, 90% minimum concentration not available from Panduit) 26 FLCFPLF-X .05m Lapping Film (For singlemode terminations only) 27 FWBTL Distilled Water Bottle (empty) -- -- Distilled Water (not available from Panduit) OPTIONAL PN335* LC Connector Stripping Template * denotes stripping template revision letter. For Technical Support: www.panduit.com/resources/install maintain.asp Page 1 of 11 Panduit Corp. 2018 INSTALLATION INSTRUCTIONS FS119A TABLE OF CONTENTS Page(s) Safety Precautions 2 900m Tight-Buffered Fiber Termination 3-6 1.6mm - 2.0mm Jacketed Cable Termination 7-11 SAFETY PRECAUTIONS 1. SAFETY GLASSES WARNING: IT IS STRONGLY RECOMMENDED THAT SAFETY GLASSES BE WORN WHEN HANDLING BARE OPTICAL FIBER. THE BARE FIBER IS VERY SHARP AND CAN EASILY DAMAGE THE EYE. 2. ISOPROPYL ALCOHOL WARNING: ISOPROPYL ALCOHOL IS FLAMMABLE. CONTACT WITH THE ALCOHOL CAN CAUSE IRRITATION TO THE EYES. IN CASE OF CONTACT WITH THE EYES, FLUSH WITH WATER FOR AT LEAST 15 MINUTES. ALWAYS USE ISOPROPYL ALCOHOL WITH PROPER LEVELS OF VENTILATION. IN CASE OF INGESTION, CONSULT A PHYSICIAN IMMEDIATELY. 3. RECOMMENDED ADHESIVE AND PRIMER WARNING: THE RECOMMENDED ADHESIVE (PANDUIT PART FJPXY) MAY CONTAIN MALEIC ACID AND METHACRYLIC ESTER. IN CASE OF EYE CONTACT, FLUSH WITH WATER FOR 15 MINUTES AND GET MEDICAL ATTENTION. WASH SKIN AFTER CONTACT. REQUEST M.S.D.S. FOR FURTHER SAFEGUARDS. CHECK USED BY DATE ON BOTTLE TO ENSURE BEST PERFORMANCE. WARNING: THE RECOMMENDED PRIMER (PANDUIT PART FJPMR) MAY CONTAIN ACETONE. THE PRIMER IS HARMFUL IF INHALED OR SWALLOWED. IN CASE OF CONTACT WITH EYES OR SKIN, FLUSH WITH WATER. GET MEDICAL ATTENTION IN CASE OF INGESTION OR CONTACT WITH EYES. DO NOT INDUCE VOMITING. CHECK USED BY DATE ON BOTTLE TO ENSURE BEST PERFORMANCE. 4. DISPOSAL OF BARE FIBERS WARNING: PICK UP AND DISCARD ALL PIECES OF BARE FIBER WITH STICKY TABS. DO NOT LET CUT PIECES OF FIBER STICK TO CLOTHING OR DROP IN THE WORK AREA WHERE THEY ARE HARD TO SEE AND CAN CAUSE INJURY. CLASS II LASER 5. LASER LIGHT PROTECTION WARNING: LASER LIGHT IS INVISIBLE. THE INVISIBLE LIGHT IS POWERFUL ENOUGH TO DAMAGE YOUR EYES. SERIOUS DAMAGE TO THE RETINA OF THE EYE IS POSSIBLE. NEVER LOOK INTO THE END OF A FIBER WHICH MAY HAVE A LASER COUPLED TO IT. SHOULD ACCIDENTAL EYE EXPOSURE TO LASER LIGHT BE SUSPECTED, ARRANGE FOR AN EYE EXAMINATION IMMEDIATELY. 6. CABLE HANDLING WARNING: FIBER OPTIC CABLE CAN BE DAMAGED BY EXCESSIVE PULLING, TWISTING, CRUSHING OR BENDING STRESSES. CONSULT THE APPROPRIATE SPECIFICATION SHEETS AS PROVIDED BY YOUR CABLE VENDOR. ANY DAMAGE MAY DECREASE OPTICAL PERFORMANCE. For Technical Support: www.panduit.com/resources/install maintain.asp Page 2 of 11