18900 Panduit Drive TDS: GMM1 Tinley Park, IL 60487 Effective Date: 19JULY12 Customer Service: 800-777-3300 Revision: 1 Technical Data Sheet Panduit GMM1 Material This specification is intended to outline the physical and chemical properties of PANDUITs GMM1 material and include the following printable material identifiers: Printable Material Prefix PPM* PRODUCT SPECIFICATIONS: Description: Material is RoHS compliant (European Union directive 2002/95/EC). GMM1consists of a flame retardant polyester film. Acrylic based, pressure sensitive permanent adhesive. Adhesive: White Standard Colors: 3.3 +/- 0.2 mils(substrate and adhesive) Thickness: Minus 30F to 266F (Minus 1C to 130C) Service Temperature Range: Minimum Application Temperature: 40F (4C) Storage Conditions: Store at 70F (21C) and 50% Relative Humidity. PROPERTIES: PERFORMANCE: Peel Adhesion: 25 oz/in minimum (PSTC 101, 15 min dwell) Tensile Strength: MD: 31 +/- 3.0 lbs./inch width (PSTC-131) Elongation: MD 50% +/- 5% (ASTM D-1000) UV Resistance: *3000 hours no change observed (ASTM G154) Elevated Temperature Exposure: After 8 hours at 150 F (65 C) there was no deterioration of the substrate. Flammability: Material is flame retardant and conforms to UL 510, also recognized as UL 94 VTM-0 per UL 94 *3000 hours equates to 5 years of assimilated outdoor UV exposure Page 1 of 2 2012 PANDUIT Corp TDS: GMM1 18900 Panduit Drive TDS: GMM1 Tinley Park, IL 60487 Effective Date: 19JULY12 Customer Service: 800-777-3300 Revision: 1 Technical Data Sheet CHEMICAL/SOLVENT RESISTANCE: The testing was conducted at room temperature. Test performed according to PSTC-101, ASTM D-543-87 and ASTM D-896-90. The testing was conducted at room temperature and performed with reference to the above test methods. Printed samples were cut 1 wide and were applied to stainless steel panels and conditioned for 24 hours. The samples were then immersed in the specified reagents for 5 immersions using the following cycle: a 10 minute immersion time followed by a 30 minute recovery time. After the fifth immersion, the samples were conditioned for 24 hours before testing. Percent retention of performance was based on a 48 hour adhesion value of 30 oz/inch. Chemical/Solvent Visual Observation Percent (%) Retention of Performance Distilled water No effect on print or adhesive 99% ASTM Reference Fuel B No effect on print, slight adhesive bleed 78% (70% Iso-octane, 30% toluene) Acetone No effect on print, slight adhesive bleed 83% Alcohol Mixture (50% Ethyl No effect on print or adhesive 95% alcohol, 30% Methyl alcohol, 20% Water by volume) 1,1,1 Trichloroethane No effect on print, slight adhesive bleed 89% ASTM 3 Oil No effect on print or adhesive 106% Methyl Ethyl Ketone No effect on print, slight adhesive bleed 84% Super Agitene No effect on print, slight adhesive bleed 78% Jet-A Fuel No effect on print, slight adhesive bleed 78% Skydrol No effect on print, slight adhesive bleed 89% SAE 30 Motor Oil No effect on print or adhesive 100% MIL Oil 56506A No effect on print or adhesive 100% PSTC: Pressure Sensitive Tape Council (USA) ASTM: American Society for Testing and Materials (USA) LIMITED WARRANTY All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and manufacturer. NEITHER PANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER. THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. Page 2 of 2 2012 PANDUIT Corp TDS: GMM1