TX6000 Shielded Copper Cable SF/UTP SPECIFIC A TION SHEET specifications TX6000 Shielded Copper Category 6 cable shall be constructed of 23 AWG Cabling System copper conductors with PE insulation. The copper conductors shall be twisted in pairs and separated TX6000 Shielded by an integrated pair separator. All four pairs shall Copper Cable SF/UTP be surrounded by an overall metallic foil shield and an overall braided shield within a LSZH jacket. LSZH: PSFL6004*-KD TX6 PLUS Shielded Jack Module Jack module: CJS688TGY TX6A 10Gig Shielded Patch Cords technical information Meters: STP6X**MIG Electrical performance: Feet: STP6X***IG Certified channel performance in a 4-connector configuration up to 100 meters and exceeds the requirements of ISO 11801 Class E Mini-Com Angled All Metal and ANSI/TIA-568-C.2 Category 6 standards for swept frequencies Shielded Modular Patch Panels up to 250 MHz 24-port, 1 RU: CPA24BLY Conductors/insulators: 23 AWG solid bare copper wire covered by PE insulation 48-port, 2 RU: CPA48BLY Certifications: ABS certificate number 13-HS1068054-PDA 72-port, 2 RU: CPA72BLY Flame rating: IEC 60332-1 Mini-Com Flat All Metal Shielded EN50575: Euroclass Eca Modular Patch Panels PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications 24-port, 1 RU: CP24BLY 48-port, 2 RU: CP48BLY Installation tension: 110 N (25 lbf) maximum 72-port, 2 RU: CP72BLY Temperature rating: 0C to 50C (32F to 122F) during installation Cable Prep Tools -20C to 60C (-4F to 140F) during operation Wire Cable jacket: LSZH snipping tool: CWST Cable diameter: 7.4mm (0.291 in.) nominal Wire Cable weight: 29 kg/500m (63 lbs./1640 ft.) stripping tool: CJAST Packaging: 500 meter (1640 feet) on a reel Package tested to ISTA Procedure 1A *To designate color, add suffix DG (Dark Gray) or WH (White). For additional cable colors, contact customer service. key features and benefits **For lengths 1 to 10 meters (increments of one meter) and 1.5, 2.5, 15, 20 meters, change the Integrated pair divider: Separates pairs for exceptional cable performance length designation in the part number to desired length. For standard cable colors other than IG Overall foil shield: Provides superior structural integrity and reduces low (International Gray) substitute IG suffix with BL frequency external interference to ensure exceptional (Black), BU (Blue), GR (Green), RD (Red), YL cable performance at all swept frequencies up to 250 MHz (Yellow), OR (Orange), or VL (Violet) to the end of the part number. For example, the part number Overall braided shield: Provides superior structural integrity and reduces low for a blue, 15-meter patch cord is STP6X15MBU. frequency external interference to ensure exceptional ***For lengths 3 to 20 feet (increments of one cable performance at all swept frequencies up to 250 MHz foot) and 25, 30, 35, 40 feet, change the length designation in the part number to desired length. Descending length Easy identification of remaining cable reduces installation For standard cable colors other than IG cable markings: time and cable scrap (International Gray) substitute IG suffix with BL (Black), BU (Blue), GR (Green), RD (Red), YL Bulk packaging: Supplied 500m (1640 ft.) to a reel (Yellow), OR (Orange), or VL (Violet) to the end of the part number. For example, the part number for a blue, 15-foot patch cord is STP6X15BU. applications TX6000 Shielded Copper Cable is a Ethernet 10BASE-T, 100BASE-T (Fast component of the Panduit TX6000 Shielded Ethernet), 1000BASE-T (Gigabit Ethernet), Copper Cabling System. Interoperable and 10GBASE-T (10 Gigabit Ethernet over limited backward compatible, this end-to-end system distances as specified in the industry provides design flexibility to protect network 10GBASE-T standards) investments well into the future. With certified 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM performance to the ISO 11801 Class E and Token ring 4/16 ANSI/TIA-568-C.2 Category 6 standards, this system will support the following applications: www.panduit.com TX6000 Shielded Copper Cable SF/UTP Mechanical Test Ultimate Breaking Strength >400 N (90 Ibf) Minimum Bend Radius 4 x cable diameter Electrical Test DC Resistance <9.38 ohm per 100m (328 ft.) DC Resistance Unbalance <2.5% Mutual Capacitance <5.6 nF per 100m (328 ft.) at 1 Khz Capacitance Unbalance <330 pF per 100m (328 ft.) at 1 kHz Characteristic Impedance 100 Ohm +/-15% up to 100 MHz Nominal Velocity of Propagation (NVP) 66% nominal Operating Voltage, maximum 80V Conductor Insulator Conductor Wire Foll Shield Pair Divider Cable Shield Screen Jacket WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2017 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP331--WW-ENG or by phone: 800.777.3300 6/2017