TX6 U/UTP Outside Plant (OSP) Copper Cable Latin America, Asia Pacific and Europe SPECIFICATION SHEET specifications Category 6 OSP cable shall meet the ANSI/TIA-568-C.2 TX6 U/UTP Copper and IEC 61156-5 Category 6 component standards. The Cabling System conductors shall be 23 AWG construction with polyolefin insulation. The cable shall have a gel-filled construction TX6 UTP Copper Cable to prevent moisture migration in underground and wet OSP: PUO6C04BL-CEG applications and a wide temperature range for extreme weather environments. The copper conductors shall be Mini-Com TX6 PLUS UTP twisted in pairs, separated by a pair separator and Jack Module covered with a UV-resistant and abrasion-resistant Jack module: CJ688TGIW* polyethylene (PE) jacket. Product is to be used in duct TX6 PLUS UTP Patch Cords CM and conduit installations only. Not to be used in aerial or direct burial applications. Foot lengths: UTPSP3 Y Meter lengths: UTPSP1 MY technical information DP6 PLUS Punchdown Patch Panels Electrical Performance: Certified channel performance in a 4-connector configuration up to 100 meters and exceeds ANSI/TIA-568-C.2 Category 6 and Angled, 24-port, ISO 11801 Class E standards at swept frequencies up to 1RU: DPA24688TGY 250 MHz Angled, 48-port, 2RU: DPA48688TGY Certified component performance up to 100 meters and Flat, 12-port: DP12688TGY exceeds the component requirements of ANSI/TIA-568-C.2 Flat, 24-port, and IEC 61156-5 Category 6 component standards at swept 1 RU: DP24688TGY frequencies up to 250 MHz Flat, 48-port, Conductors/insulators: 23 AWG solid copper insulated with polyolefin 2 RU: DP48688TGY Standards compliance: ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E Mini-Com Flush Mount Modular Patch IEC 60794-1-2F5 Method B Water Prevention Requirement Panels EN50575: Euroclass Fca Angled, 24-port, Installation tension: 25 lbf (110 N) maximum 1RU: CPPA24FMWBLY Angled, 48-port, Temperature rating: -22F to 140F (-30C to 60C) during installation 2RU: CPPA48FMWBLY -40F to 176F (-40C to 80C) during operation Flat, 24-port, Cable jacket: Black UV-resistant and abrasion-resistant polyethylene (PE) 1 RU: CPP24FMWBLY Flat, 48-port, Cable diameter: 0.262 in (6.7mm) nominal 2 RU: CPP48FMWBLY Cable weight: 36 lbs./1000 ft. (16 kg/305m) Termination and Cable Prep Tools Packaging: 1000 ft. (305m) on a reel Termination tools: EGJT or TGJT key features and benefits Conductor snipping tool: CWST Robust design Protects against environmental elements that can cause electrical performance failures Conductor stripping tool: CJAST Flooding compound Waterproof gel prevents moisture migration Reel Ensures proper performance and provides quick installation *To designate a color, add suffix IW (Off White), EI (Electric Ivory), IG (International Gray), WH (White), BL (Black), OR (Orange), RD (Red), BU (Blue), GR Descending length Easy identification of remaining cable reduces installation time (Green), YL (Yellow), or VL (Violet). cable markings and cable scrap For lengths 1 to 20 feet (increments of one foot) and 25, 30, 35, 40 feet, change the length designation in part number to the desired length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), applications GR (Green), RD (Red), YL (Yellow), OR (Orange), or VL TM (Violet) before Y at the end of the part number. For TX6 U/UTP OSP Copper Cable is a Category 6 and ISO 11801 Class E Standards, example, the part number for a blue, 15-foot patch cord TM component of the Panduit TX6 UTP Copper this system will support the following is UTPSP15BUY. For lengths 1 to 10 meters (increments of one meter) Cabling System. This end-to-end system applications: and 0.5, 1.5, 2.5, 15, 20 meters, change the length provides Gigabit Ethernet performance with Ethernet 10BASE-T designation in the part number to the desired length. For standard cable colors other than Off White, add usable bandwidth beyond 250 MHz. With 100BASE-T (Fast Ethernet) suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR certified performance to the ANSI/TIA-568-C.2 1000BASE-T (Gigabit Ethernet) (Green), OR (Orange), or VL (Violet) before Y at the end of the part number. For example, the part number for a blue, 5-meter patch cord is UTPSP5MBUY. PRODUCT IS TO BE USED IN DUCT AND CONDUIT INSTALLATIONS ONLY. NOT TO BE USED IN AERIAL OR DIRECT BURIAL APPLICATIONS. www.panduit.com TX6 U/UTP Outside Plant (OSP) Copper Cable additional specification Mechanical Test Ultimate Breaking Strength >90 lbf (400 N) Minimum Bend Radius 4 x Cable Diameter Electrical Test Nominal Velocity of Propagation (NVP) 67% nominal Operating Voltage, Maximum 80V cable construction Jacket Conductor Wire Flooding Compound Cross-divider Conductor Insulator WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2017 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP407--WW-ENG or by phone: 800.777.3300 6/2017