TX6000 Enhanced Category 6 U/UTP Copper Cable North America SPECIFICATION SHEET specifications TX6000 UTP Copper Cabling System Category 6 cable shall exceed ANSI/TIA-568-C.2 and IEC 61156- 5 Category 6 component standards. The conductors shall be TX6000 UTP Copper Cable 23 AWG construction with FEP/polyolefin (CMP) insulation. The copper conductors shall be twisted in pairs, separated by a cross- Plenum: PUP6004*-WLP divider and covered by a low smoke, flame-retardant (CMP) jacket Mini-Com TX6 PLUS UTP or a flame-retardant (CMR) jacket. Jack Module Jack module: CJ688TG** technical information TX6 PLUS UTP Patch Cords Electrical performance: Certified channel performance in a 4-connector configuration up to 100 meters Foot lengths: UTPSP3***Y and exceeds ANSI/TIA-568-C.2 Category 6 and ISO 11801 Meter lengths: UTPSP1M Y Class E standards at swept frequencies up to 250 MHz DP6 PLUS Angled Punchdown Certified component performance up to 100 meters and exceeds Patch Panels the component requirements of ANSI/TIA-568-C.2 and IEC 61156-5 24-port, 1 RU: DPA24688TGY Category 6 component standards at swept frequencies up to 250 MHz 48-port, 2 RU: DPA48688TGY Standards compliance: UL Listed CMP-LP (0.5A) for Plenum DP6 PLUS Flat Punchdown Patch Panels Conductors/ Plenum 23 AWG bare copper wire covered by FEP/polyolefin insulation insulators: 12-port: DP12688TGY 24-port, 1 RU: DP24688TGY Flame rating: Plenum NFPA 262 and CSA FT-6 48-port, 2 RU: DP48688TGY PoE compliance: Meets IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt for PoE applications GP6 PLUS Category 6 Punchdown System Installation tension: 25 lbf (110 N) maximum See website (www.panduit.com) or Temperature rating: 32F to 122F (0C to 50C) during installation catalog for complete system information. -4F to 194F (-20C to 90C) during operation Cable Prep Tools Cable jacket: Plenum low smoke, flame-retardant PVC Wire snipping tool: CWST Cable diameter: Plenum - 0.225 in. (5.7mm) nominal Wire stripping tool: CJAST Cable weight: Plenum 28 lbs./1000 ft. (13 kg/305m) *To designate a color, add suffix BU (Blue), Packaging: 1000 ft. (305m), in Reelex packaging WH (White), YL (Yellow), IG (International Gray), Package tested to ISTA Procedure 1A BL (Black), RD (Red), GR (Green), OR (Orange), or VL (Violet). **To designate color, add suffix IW (Off White), EI (Electric Ivory), IG (International Gray), key features and benefits WH (White), BL (Black), OR (Orange), RD (Red), BU (Blue), GR (Green), Third party tested Cable has been tested as part of the TX6000 Copper Cabling System by YL (Yellow), or VL (Violet). an independent laboratory and complies with the electrical channel ***For lengths 1 to 20 feet (increments of one requirements of the following standard: ANSI/TIA-568-C.2 Category 6 foot) and 25, 30, 35, 40 feet, change the length Guaranteed channel Industry leading guaranteed channel performance above the TIA/ISO designation in part number to the desired performance above standards with head room guaranteed length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), the standards GR (Green), RD (Red), YL (Yellow), Integrated pair divider Separates pairs for exceptional cable performance OR (Orange), or VL (Violet) before Y at the end of the part number. For example, the part number for a blue, 15-foot patch cord Reelex packaging Ensures proper performance and provides quick installation is UTPSP15BUY. Tested beyond Cable has been characterized to 550 MHz, 300 MHz above the standard For lengths 1 to 10 meters (increments of one the standards meter) and 0.5, 1.5, 2.5, 15, 20 meters, change the length designation in the part number to Extended temperature Allows operation in 90C (194F) ambient environment providing error-free the desired length. For standard cable colors range performance in high-density cabinets and large cable bundles running PoE+ other than Off White, add suffix BL (Black), or PoE++ applications BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange), or VL (Violet) before Y at the Descending length Easy identification of remaining cable reduces installation time and end of the part number. For example, the cable markings cable scrap part number for a blue, 5-meter patch cord is UTPSP5MBUY. applications TX6000 U/UTP Copper Cable is a component of the Panduit TX6000 Copper Cabling System. Interoperable and backward compatible, this end-to-end system provides design flexibility to protect network investments well into the future. With certified performance to the ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E standards, this system will support the following applications: Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet), 10GBASE-T (10 Gigabit Ethernet over limited distances as specified in the industry 10GBASE-T standards) 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM Token Ring 4/16 www.panduit.com TX6000 Enhanced Category 6 U/UTP Copper Cable North America additional specifications Mechanical Test Ultimate Breaking Strength >90 lbf (400 N) Minimum Bend Radius 4 x cable diameter Electrical Test Nominal Velocity of Propagation (NVP) CMP 72% Operating Voltage, Maximum 80V cable construction Jacket Conductor Wire Cross-Divider Conductor Insulator WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2015 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP422--WW-ENG or by phone: 800.777.3300 11/2017