Category 6A UTP Copper Cable SPECIFIC A TION SHEET specifications Category 6A/Class EA cable shall be constructed of 23 AWG TX6A 10Gig copper conductors with FEP Plenum (CMP) insulation. The UTP Copper Cabling System copper conductors shall be twisted in pairs and separated by a cross-divider. All four pairs shall be surrounded by a non- Category 6A UTP Copper Cable conductive foil tape and a flame retardant jacket. The foil Plenum: PUP6AS04*-G tape shall suppress the effects of alien crosstalk. TX6A 10Gig UTP Jack Module Jack module: CJ6X88TG** technical information Shuttered jack module: CJH6X88TG** Electrical performance: Certified component and channel performance in a 4-connector Right angle jack configuration up to 100 meters and meets/exceeds the module: CJR6X88TG** requirements of ISO 11801 Class E and ANSI/TIA-568-C.2 A Category 6A standards for swept frequencies up to 500 MHz TX6A 10Gig UTP Patch Cords CM Cable diameter: FEP Plenum (CMP): 0.250 in. (6.4mm) nominal (meter lengths): UTP6A M Standards compliance: UL Listed CMP-LP (0.6A) or better CM (foot lengths): UTP6A Conductors/insulators: 23 AWG solid copper insulated with FEP (CMP), flame retardant PE TX6A-SD 10Gig UTP Patch Cords Flame rating: FEP plenum (CMP): NFPA 262 CM PoE compliance: Meets IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt for (foot lengths): UTP6ASD BU PoE applications CM (meter lengths): UTP6ASD MBU Installation tension: 110 N (25 lbf) maximum Mini-Com Angled Temperature rating: 32F to 140F (0C to 60C) during installation Modular Patch Panels -4F to 194F (-20C to 90C) during operation 24-port, 1 RU: CPPA24FMWBLY Cable jacket: FEP plenum (CMP): flame retardant PVC 48-port, 2 RU: CPPA48FMWBLY 72-port, 2 RU: CPPLA72WBLY Cable weight: 31.2 lbs./1000 ft. (14.2 kg/305m) Mini-Com Flat Modular Patch Panels Packaging: 33.4 lbs./1000 ft. (15.2 kg/305m) 24-port, 1 RU: CPP24FMWBLY Packaged tested to ISTA Procedure 1A 48-port, 1 RU: CPP48HDWBLY 48-port, 2 RU: CPP48FMWBLY 72-port, 2 RU: CP72FMWBLY key features and benefits Cable Prep Tools Interoperable Compatible with components of the TX6A-SD 10Gig UTP Wire Copper Cabling System with MaTriX Technology (70 meter solu- snipping tool: CWST tion) for increased design flexibility Wire stripping tool: CJAST Headroom warranty Provides margin above the industry standard for both electrical and alien crosstalk performance *To designate color, add suffix BU (Blue) or Round cable design Improves fill capacity, cable management, reduces required bend WH (White). For additional cable colors, contact customer service. radius and allows efficient use of pathways and spaces **To designate color, add suffix IW (Off White), Extended temperature Allows operation in 90C (194F) ambient environment providing EI (Electric Ivory), IG (International Gray), range error-free performance in high-density cabinets and large cable WH (White), AW (Arctic White), BL (Black), BL (Blue), RD (Red), YL (Yellow), GR (Green), bundles running PoE+ or PoE++ applications OR (Orange), or VL (Violet). Highest density All testing and headroom based on 48-port/1RU panels For lengths 3 to 20 feet (increments of one foot) and 25, 30, 35, 40 feet, change the length Descending length Easy identification of remaining cable to reduce installation time designation in the part number to desired length. cable markings and cable scrap For standard cable colors other than IG (International Gray) substitute IG suffix with BL (Black), BU (Blue), GR (Green), RD (Red), YL (Yellow), OR (Orange), or VL (Violet) to the applications end of the part number. For example, the part number for a Blue, 15-foot patch cord Category 6A UTP Copper Cable is a With certified performance to the ISO 11801 is UTP6A15BU. component of the TX6A 10Gig UTP Copper Class E and ANSI/TIA-568-C.2 Category 6A A For lengths 1 to 10 meters (increments of Cabling System when installed according to standards. Usage of the TX6A 10Gig UTP one meter) and 1.5, 2.5, 15, 20 meters, change the above length considerations. Interoperable Copper Cabling System includes: the length designation in the part number to desired length. For standard cable colors other and backwards compatible, this end-to-end Ethernet 10GBASE-T than IG (International Gray) substitute IG suffix system provides design flexibility to protect with BL (Black), BU (Blue), GR (Green), network investments well into the future. RD (Red), YL (Yellow), OR (Orange), or VL (Violet) to the end of the part number. For example, the part number for a Blue, 15-meter www.panduit.com patch cord is UTP6A15MBU.Category 6A UTP Copper Cable Mechanical Test Ultimate Breaking Strength >400 N (90 Ibf) Minimum Bend Radius 4 x cable diameter Electrical Test DC Resistance <9.38 ohm per 100m (328 ft.) DC Resistance Unbalance <5% Mutual Capacitance <5.6 nF per 100m (328 ft.) at 1 Khz Capacitance Unbalance <330 pF per 100m (328 ft.) at 1 kHz Characteristic Impedance 100 Ohm +/-15% up to 100 MHz Nominal Velocity of Propagation (NVP) 67% cable construction Foil Tape Conductor Wire Pair Separator Conductor Insulator Jacket WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2017 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP415--WW-ENG or by phone: 800.777.3300 12/2017