MINI-COM TX6 PLUS UTP Jack Module SPECIFICATION SHEET specifications Category 6/Class E eight-position jack module shall terminate unshielded twisted 4 pair, 22 26 AWG, 100 TX6500 and TX6000 ohm cable and shall not require the use of a punchdown Copper Cabling Systems tool. Jack module shall use forward motion termination to optimize performance by maintaining cable pair geometry MINI-COM TX6 PLUS Jack Module12 TG and eliminating conductor untwist.The white termination Module: CJ688TG* cap shall be color coded for T568A and T568B TX6500 UTP Copper Cable wiring schemes. Plenum: PUP6504**-U Riser: PUR6504**-UY technical information TX6000 UTP Copper Cable Plenum: PUP6004**-UY Category 6/Class E Exceeds all TIA/EIA-568-B.2-1 Category 6 and ISO 11801 Riser: PUR6004**-UY channel and 2nd Edition Class E standard requirements at swept component performance: frequencies up to 250 MHz TX6 PLUS Patch Cords 3 feet: UTPSP3***Y FCC compliance: Meets FCC Part 68 Subpart F contacts plated with 50 5 feet: UTPSP5***Y microinches of gold for superior performance 7 feet: UTPSP7***Y 10 feet: UTPSP10***Y IEC compliance: Meets IEC 60603-7 14 feet: UTPSP14***Y 20 feet: UTPSP20***Y DP6 PLUS Flat Punchdown Patch Panels 12-port DP12688TGY key features and benefits 24-port, 1 RU: DP24688TGY 48-port, 2 RU: DP48688TGY 100% performance tested Confidence that each jack module will deliver the critical electrical performance requirements DP6 PLUS Angled Punchdown Patch Panels Utilizes enhanced Optimizes performance by eliminating conductor untwist 24-port, 1 RU: DPA24688TGY GIGA-TX technology reduces installation expense 48-port, 2 RU: DPA48688TGY Improved termination cap Conductor retention slots simplify termination GP6 PLUS Category 6 Punchdown System Modularity Jack modules snap in and out of MINI-COM Faceplates, Modular Patch Panels and Surface Mount Boxes See website (www.panduit.com) for fast moves, adds and changes or catalog for complete system information True strain relief Controls cable bend radius for long term Termination Tools installed performance Jack module Individual serialized Marked with quality control number for traceability termination tool: TGJT Wire snipping tool: CWST Industry standard Familiar to end-users backwards compatible Wire stripping tool: CJAST RJ45 interface *To designate a color, add suffix IW (Off White), EI (Electric Ivory), IG (Int l Gray), WH (White), BL (Black), OR (Orange), RD (Red), BU (Blue), GR (Green), YL (Yellow), or VL (Violet). **For colors other than BU (Blue), substitute applications with WH (White), YL (Yellow) or IG (Int l Gray). ***For lengths 1 to 20 feet (increments of one MINI-COM TX6 PLUS UTP Jack Module is a Systems include: foot) and 25, 30, 35, 40 feet, change the length component of the TX6500 and TX6000 Ethernet 10BASE-T, 100BASE-T (Fast designation in the part number to the desired Copper Cabling Systems. Interoperable and Ethernet), 1000BASE-T (Gigabit Ethernet), length. For standard cable colors other than Off backward compatible, these end-to-end 10000BASE-T (10 Gigabit Ethernet over White, add suffix BL (Black), BU (Blue), GR (Green), RD (Red), YL (Yellow), OR (Orange) systems provide design flexibility to protect limited distances as specified in the industry or VL (Violet) before Y at the end of the part network investments well into the future. With 10GBASE-T standards) number. For example, the part number for a certified performance to the TIA/EIA-568-B.2-1 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM blue 15-foot patch cord is UTPSP15BUY. Category 6 and ISO 11801 Class E standards, Token Ring 4/16 these systems are ideal for today s high Digital video and broadband/baseband performance workstation applications. Usage analog video of the TX6500 and TX6000 Copper Cabling Voice over Internet Protocol (VoIP) www.panduit.com MINI-COM TX6 PLUS UTP Jack Module Test Results Mechanical Test Test Method Measurement Typical Test Results Normal Force Load (grams) >100 Vibration IEC 512-6d Circuit Resistance (mOhms) <40 Shock IEC 512-6c Contact Disturbance (microseconds) <5 Durability IEC 512-9a Circuit Resistance (mOhms) <40 Mating/Un-Mating IEC 512-13b Mating Force (N) <20 Un-Mating Force (N) <20 Termination Cycles IEC 352 Number of Cycles >20 Electrical Test Test Method Measurement Typical Test Results Low Level Circuit Resistance IEC 512-2a Resistance (mOhms) <20 Dielectric Withstand Voltage IEC 512-4a 1000 V, 1 minute Passed Insulation Resistance IEC 512-3a Resistance (mOhms) >500 Environmental Test Test Method Measurement Typical Test Results Temperature Life IEC 512-9b Circuit Resistance (mOhms) <40 Humidity IEC 512-11c Circuit Resistance (mOhms) <40 Thermal Shock IEC 512-11d Circuit Resistance (mOhms) <40 Climatic Sequence IEC 512-11a Circuit Resistance (mOhms) <40 Flowing Mixed Gas Corrosion IEC 512-11g Circuit Resistance (mOhms) <40 .71 (18.06) .62 1.50 (15.87) (38.15) Dimensions are in inches (Dimensions in parentheses are metric). WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Jalisco, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.3767.7011 Phone: 52.333.666.2501 Phone: 61.3.9794.9020 For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty For more information 2008 PANDUIT Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com WW-COSP48 or by phone: 800-777-3300 and reference COSP48 3/2008