TX6A-SD 10Gig U/UTP Copper Cable with MaTriX Technology SPECIFICATION SHEET specifications TX6A-SD 10Gig U/UTP Copper Cabling Category 6A/Class E , cable is constructed of 26 AWG copper conductors with FEP A System Plenum (CMP), PVC Riser (CMR), HDPE Low Smoke Zero Halogen (LSZH), or PVC (CM) insulation. The copper conductors are twisted in pairs and separated by a cross- divider. All four pairs are surrounded by MaTriX tape and a flame retardant jacket. TX6A-SD 10Gig U/UTP Copper Cable The patented MaTriX tape suppresses the effect of alien crosstalk allowing 10 Gb/s Plenum: PUP6ASD04*-UG transmission. The innovative cable design provides installation flexibility as cables can Riser: PUR6ASD04*-CG be routed in tight bundles through pathways and spaces. LSZH (60332-1): PUL6ASD04 LSZH (60332-3): PUZ6ASD04 CM: PUC6ASD04*-EG technical information Mini-Com TX6A 10Gig UTP Category 6A/Class E Exceeds electrical and alien crosstalk performance requirements of A Jack Modules channel performance: ANSI/TIA-568-C.2 Category 6A and ISO 11801 Class E standards for A Jack module: CJ6X88TG** supporting 10GBASE-T transmission over twisted-pair cabling systems in a 4-connector configuration Shuttered jack module: CJD6X88TG** *Note: The cable utilizes 26 AWG conductors which does not meet the 24 to 22 AWG conductor size of horizontal cable in ANSI/TIA-568-C.2, resulting in increased TX6A-SD 10Gig UTP Patch Cords attenuation which de-rates the maximum channel distance to 70 meters (229 feet) CM (foot lengths): UTP6ASD BU Cable diameter: 0.240 in. (6.1mm) nominal CM (meter lengths): UTP6ASD MBU Conductors/insulators: 26 AWG solid copper insulated with FEP (CMP), flame retardant LSZH PVC (CMR), HDPE (LSZH), or PVC (CM) (meter lengths): UTP6ASDL MBU Flame rating: FEP Plenum (CMP): NFPA 262 Mini-Com Angled Modular PVC Riser (CMR): UL 1666 Patch Panels HDPE (LSZH-1): IEC 60332-1, 60754-2, 61034-2 HDPE (LSZH-3): IEC 60332-3-25 (-3d), NBN C 30-004 (F2), 60754-2, 61034-2 24-port, 1 RU: CPPA24FMWBLY PVC (CM): IEC 60332-1 and UL 1685 48-port, 2 RU: CPPA48FMWBLY PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications 72-port, 2 RU: CPPLA72WBLY Installation tension: 25 lbf (110 N) maximum Mini-Com Flat Modular Patch Panels Temperature rating: 32F to 140F (0C to 60C) during installation -4F to 167F (-20C to 75C) during operation 24-port, 1 RU: CPP24FMWBLY Cable jacket: FEP Plenum (CMP)/PVC (CM): Flame retardant PVC 48-port, 1 RU: CPP48HDWBLY PVC Riser (CMR)/HDPE (LSZH): Low smoke flame retardant PVC 48-port, 2 RU: CPP48FMWBLY HDPE (LSZH): PVC Free 72-port, 2 RU: CPP72FMWBLY Cable weight: FEP Plenum: 38 lbs./1000 ft. (17 kg/305m) For additional modular patch panels reference www.panduit.com PVC Riser (CMR)/HDPE (LSZH)/PVC (CM): 30 lbs./1000 ft. (14 kg/305m) Packaging: 1000 ft. (305m) on a reel Cable Prep Tools FEP Plenum (CMP): 42 lbs./1000 ft. (19 kg)/305m) Wire PVC Riser (CMR): 34 lbs./1000 ft. (15 kg)/305m) snipping tool: CWST HDPE (LSZH)/PVC (CM): 46 lbs./1000 ft. (21 kg)/305m) Wire Package tested to ISTA procedure 1A stripping tool: CWST Cable bundle organizing tool: CBOT24K key features and benefits *To designate color, add suffix BU (Blue), Interoperable Compatible with components of the TX6A 10Gig U/UTP Copper Cabling WH (White), IG (International Gray) or System with MaTriX Technology (100 meter solution) for increased YL (Yellow). For additional cable colors, contact design flexibility Customer Service. To designate color and length, replace with MaTriX Technology Provides superior suppression of alien crosstalk (PSANEXT and PSAACRF) BU-EG (Blue) or WH-EG (White) to designate color in improves the installation flexibility by allowing cable combing in existing a Euro pallet with 36 reels, 305m each. pathways without compromising performance Replace with BU-CED (Blue) or WH-CED (White) to designate color in a Euro pallet of 36 reels, 500m Superior headroom Provides the highest margins above the industry standard for both electrical each. warranty and alien crosstalk performance **To designate color, add suffix IW (Off White), Smaller cable diameter Allows efficient use of pathways and spaces by improving fill capacity EI (Electric Ivory), IG (International Gray), AW (Arctic White), BL (Black), BU (Blue), than most Category 6 and reducing required bend radius resulting in easier cable routing RD (Red), YL (Yellow), GR (Green), OR (Orange), cable and round, and management or VL (Violet). flexible design For lengths 3 to 20 feet (increments of one foot) 20, 25, 30, 35 or 40 feet change the length Extended temperature Allows operation in 75C (167F) ambient environment providing error-free designation in the part number to the desired range performance in high density cabinets and large cable bundles for running length. For standard cable colors other than Off PoE Plus applications White, add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange), GY (Gray), Cross-divider Separates pairs for exceptional cable performance or VL (Violet) to the end of the part number. For example, the part number for a blue, 15-foot patch Descending length Easy identification of remaining cable to reduce installation time and cord is UTP6ASD15BU. cable markings cable scrap For lengths 1, 2, 2.5, 3, 5 meters, change the length designation in the part number to the desired length. For standard cable colors other than Off White, add suffix BL (Black), BU (Blue), applications RD (Red), YL (Yellow), GR (Green), OR (Orange), GY (Gray), or VL (Violet). LSZH patch cable The TX6A-SD 10Gig U/UTP Copper Cable with Key applications include: available in Off White or BU (Blue). For example, MaTriX Technology is a component of the 10GBASE-T Ethernet the part number for a blue, 5-meter patch cord is TX6A 10Gig Copper Cabling System. Data center I/O consolidation UTP6ASD5MBU. Interoperable and backward compatible, this Data center server virtualization Contact Customer Service for bulk packaged and/ end-to-end system provides design flexibility to Back-bone aggregation or keyed jack modules and patch cords. protect network investments well into the future. Parallel processing and high speed computing www.panduit.com TX6A-SD 10Gig U/UTP Copper Cable with MaTriX Technology additional specifications Mechanical Test Ultimate Breaking Strength >90 Ibf (400 N) Minimum Bend Radius 4 x cable diameter Electrical Test DC Resistance <9.38 Ohm per 328 ft. (100m) DC Resistance Unbalance <5% Mutual Capacitance <5.6 nF per 328 ft. (100m) at 1 kHz Capacitance Unbalance <330 pF per 328 ft. (100m) at 1 kHz Characteristic Impedance 100 Ohm +/-15% up to 100 MHz Nominal Velocity of Propagation (NVP) Panduit 67% Operating Voltage, maximum 80V cable construction 26 AWG Conductor Wire Conductor Insulator MaTriX Tape Barrier Cross-Divider Jacket WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2015 Panduit Corp. ALL RIGHTS RESERVED. Visit us at www.panduit.com COSP289--WW-ENG Contact Customer Service by email: cs panduit.com Replaces WW-COSP198 or by phone: 800.777.3300 6/2015