PanView iQ (PViQ ) Interconnect Patch Cords Enhanced SPECIFICATION SHEET specifications PanView iQ Interconnect Patch Cords Category 6A/Class E UTP interconnect patch cords shall be A Enhanced UTP CM Rated constructed of 23 AWG stranded copper cable with a PViQ Patch Foot lengths: PVQ-EU6AC3BU* Panel Plug on one end and a LED switch modular plug on the other Meter lengths: PVQ-EU6AC1MBU end. Copper conductors in patch cable shall be twisted in pairs and separated by a quadrant separator. All four pairs shall be surrounded PanView iQ Interconnect Patch Cords Enhanced STP CM/LSZH Rated by MaTriX tape. An additional 26 AWG conductor pair shall surround the MaTriX tape to connect the LED switch plug to 9th Foot lengths: PVQ-ES6X3BU* and 10th contacts on the PViQ Patch Panel Plug. A flame Meter lengths: PVQ-ES6X1MBU retardant jacket will cover all conductors. The MaTriX tape shall PanView iQ Interconnect Patch Cords suppress alien crosstalk and allow 10 Gb/s transmission. Patch CM Rated cords shall be used in conjunction with intelligent patch panels Foot lengths: PVQ-BIU6C3BU* and exclusively for interconnect architectures. Meter lengths: PVQ-BIU6C1MBU** PanView iQ Interconnect Patch Cords technical information LSZH Rated Meter lengths: PVQ-BIU6L1MBU Category 6A/Class E Certified channel performance in a 4-connector configuration up to A channel performance: 100 meters and exceeds the requirements of PanView iQ Patch Panels ANSI/TIA-568-C.2 Category 6A and ISO 11801 Class E A Modular, intelligent, blank 24-port standards for supporting 10GBASE-T transmission over twisted-pair Flat unshielded: PVQ-MIQPU24 cabling systems Angled unshielded: PVQ-MIQAPU24 Flat shielded: PVQ-MIQPS24 Certified component performance to the ANSI/TIA-968-A Angled shielded: PVQ-MIQAPS24 component standard for supporting 10GBASE-T transmission over PanView iQ Intelligence Modules twisted-pair cabling systems Panel manager (PM): PVQ-PM Expansion Cable diameter: 0.295 in. (7.5mm) nominal module (EM): PVQ-EM IEC compliance: Meets IEC 60603-7 NOTE: PM requires PanView iQ Power Supply (not included). PoE compliance: Meet requirements of IEEE 802.3af and IEEE 802.3at for PanView iQ Power Supply PoE applications 12 volt power supply UL rated: Meets UL 1863 (North America): PVQ-PS12VDC-S (Europe): PVQ-PS12VDC-E (UK): PVQ-PS12VDC-U key features and benefits (Japan): PVQ-PS12VDC-J (China): PVQ-PS12VDC-C Switch/server Communicates connection status between switch/server PIM Software Platform and Modules port detection and PViQ Patch Panels Base functionality 100% performance tested Assurance that each patch cord will deliver the critical module: PIM-BASE electrical performance requirements Connectivity management module: PIM-CONNECT Integral pair manager Optimizes performance and consistency by reducing untwist Maintenance, support and warranty at the plug agreement: PIM-CAMA Software and Slender strain relief boot Provides easy access in high-density applications documentation: PIM-MEDIA Patented tangle free latch Prevents snags and provides easy release, saving time on *For standard lengths other than 3 feet (5, 7, 10, 14, frequent moves, adds, and changes or 20) change the length designation in the part number to the desired length. For standard cable color Ninth conductor continuity Provides continuity through the patch cord enabling the other than BU (Blue), replace suffix BU with WH (White) at the end of the part number. For example, the part PanView iQ System to monitor connectivity without number for a white, 5-foot UTP patch cord is interfering with Ethernet performance PVQ-EU6AC5WH. For example, the part number for a white, 5-foot STP patch cord is PVQ-ES6X5WH. Variety of cable colors Meets individual length and color-coding requirements for For standard lengths other than 1 meter (2, 3, 5 or 10) change the length designation in the part number and lengths greater system flexibility to the desired length. For standard cable color other than BU (Blue), replace suffix BU with WH (White) at LED indicator and switch LEDs aid in patch cord tracing and connectivity changes at the end of the part number. For example, the part number for a white 2 meter UTP patch cord is the switch end they also identify unauthorized removals PVQ-ES6X2MWH. For example, the part number for or insertions a white 2 meter STP patch cord is PVQ-ES6X2MWH. **For standard lengths other than 3 feet (5, 7, 10, 14, or 20) change the length designation in part number to applications the desired length. For standard cable colors other than BU (Blue) replace suffix BU with GR (Green) at the end of the part number. For example, the part number for a Panduits PViQ System Hardware, which upgraded to fully managed at a future time. green 10-foot CM patch cord is PVQ-BIU6C10GR. includes intelligent patch panels, modules and PViQ Interconnect Patch Cords enable ***For standard lengths other than 1 meter (2, 3, 5, or 10) change the length designation in part number to cabling, seamlessly feeds information directly intelligent physical infrastructure management for the desired length. For standard cable colors other than into the Physical Infrastructure Manager (PIM ) interconnect architectures by verifying switch port BU (Blue) replace suffix BU with GR (Green) at the end of the part number. For example, the part number for a Software Platform to provide continuous real-time connection and communicating with the system green 10-meter CM patch cord is PVQ-BIU6C10MGR. patch field monitoring and visibility of physical software, to allow improved network visibility. For standard lengths other than 1 meter (2, 3, 5, or infrastructure connectivity for enhanced system Interconnect patch cords can reduce patch panel 10) change the length designation in part number to the desired length. For standard cable colors other than BU reliability and security and capacity management. requirements by 50% over cross-connect (Blue), replace suffix BU with WH (White) at the end of designs, reducing installation and the part number. For example, the part number for a PViQ Patch Panels support tiered installations white 10-meter, LSZH patch cord is PVQ-BIU6L10MWH. deployment costs. to provide customers with the flexibility of To order this module, add the appropriate letter to the end of the part number, based on the size of the installing passive connectivity that may be installation: -S (<50 racks) -M (50-199 racks) -L (200-399 racks) -X (400+ racks). For example, the part number for the Connectivity Management Module www.panduit.com for 250 racks is PIM-CONNECT-L. PanView iQ (PViQ ) Interconnect Patch Cords Enhanced Twist Tie Twist Tie Identification Label Strain Relief Boot 2.000.50 Category 6A Shielded Plug Connection for 9th and 10th Wire LED Switch End Plug T568B Wiring Scheme Plug Position Cable Wire 1 White/Orange 2 Orange 3 White/Green 4 Blue 5 White/Blue 6 Green 7 White/Brown 8 Brown WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2012 Panduit Corp. ALL RIGHTS RESERVED. Visit us at www.panduit.com PVSP71--WW-ENG Contact Customer Service by email: cs panduit.com Replaces WW-PVSP37 or by phone: 800.777.3300 11/2012