18900 Panduit Drive TDS: GMV1 Tinley Park, IL 60487 Effective Date: 26JUN15 Customer Service: 800-777-3300 Revision: 6 Technical Data Sheet Preprinted Vinyl Film This specification is intended to outline the physical and chemical properties of PANDUITs pressure sensitive preprinted RoHS compliant vinyl material and include the following part numbers and printable material identifiers: Part Number Prefixes PCV*Y PCVB*Y PVS*Y PLMV* GPCV* PRODUCT SPECIFICATIONS: Description: Material is RoHS compliant (European Union directive 2002/95/EC).Material is a two year vinyl film with a pressure sensitive adhesive. Print Methods: This material is preprinted. Adhesive: Acrylic based, pressure sensitive permanent adhesive. Standard Colors: White, Yellow, Orange, Red, Blue and Green Thickness: 4.5 +/- 0.5 mils (substrate and adhesive) Service Temperature -40F to 176F (-40C to 80C) Range: Minimum Application 50F (10C) Temperature: Storage Conditions: Store at 70F (21C) and 50% Relative Humidity. PROPERTIES: PERFORMANCE: Peel Adhesion to Stainless Steel: 40 oz/in width minimum (PSTC-101, 72 hours. min. dwell) Shear Adhesion: 24+ hours (PSTC-107, Procedure A) Tensile Strength: MD 15 +/- 1.5 lbs./inch width (PSTC-131) TD 13 +/- 1.3 lbs./inch width (PSTC-131) MD 90% +/- 10% (PSTC-131) Elongation: TD 195% +/- 10% (PSTC-131) Elevated Temperature After 8 hours at 150F (65.5C) there was no deterioration of the substrate Exposure: 2 Tack: 425 g/cm (ASTM D-2979-71, 1 sec dwell) Page 1 of 2 2015 PANDUIT Corp TDS: GMV1 18900 Panduit Drive TDS: GMV1 Tinley Park, IL 60487 Effective Date: 26JUN15 Customer Service: 800-777-3300 Revision: 6 Technical Data Sheet CHEMICAL/SOLVENT RESISTANCE: Preprinted samples were applied to stainless steel panels and conditioned for 24 hours at room temperature before testing. The samples were then immersed in the specified reagents for five immersions using the following cycle: a 10 minute immersion time followed by a 30 minute recovery time. After the fifth immersion, the samples was rubbed 10 times with a lint free cotton gauze. Visual Observation Substrate / Adhesive Pre-Printed Chemical Reagent Printed Legend Distilled Water No effect No effect Mineral Spirits No effect No effect Toluene Material disintegrated No effect Isopropyl Alcohol No effect No effect Methanol No effect No effect Acetone Material disintegrated No effect Material disintegrated No effect Methyl Ethyl Ketone Loss of adhesive No effect 1,1,1 Trichloroethane Freon TF No effect No effect Super Agitene No effect No effect Jet-A Fuel No effect No effect Arco TruSlide 68 No effect No effect SAE 30 Motor Oil No effect No effect ASTM: American Society for Testing and Materials (U.S.A.) PSTC: Pressure Sensitive Tape Council (U.S.A.) Approvals UL Recognized: UL969 File Number: MH 14576 CUL Recognized: C22.2 No. 0.15-01 File Number: MH 14576 LIMITED WARRANTY All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and manufacturer. NEITHER PANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER. THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. Page 2 of 2 2015 PANDUIT Corp TDS: GMV1