A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems Equipment Jumper Kits C. Bond network equipment to grounding strip or Use jumpers with 90 bent lug, on grounding strip side, Fiber Optic grounding busbar for high density grounding requirements up to one ground Systems point per RU Jumper kit available with both ends factory terminated to provide a bolt-on solution Use jumpers with 45 bent lugs, on grounding strip side, D. for improved cable management Jumper kit available with one end factory terminated to Power over attach to the grounding strip or grounding busbar free Engineered to comply with US and International Ethernet end accommodates unique equipment terminations grounding requirements E. Length Std. Std. Zone In. Pkg. Ctn. Cabling Part Number (m) Angle Part Description Qty. Qty. 6 AWG (16mm) Equipment Jumper Factory Terminated on One End for Switches, Cabinets, and 4-Post Racks F. Wireless GJS660U 60 Straight 6 AWG green wire with yellow horizontal stripe. 1 10 (1.52) Jumper is pre-terminated on one end with RGEJ1024PFY LCC6-14JAW-L. GJS696U 96 Straight 1 10 (2.44) G. Outlets 10 AWG (6mm) Equipment Jumpers Factory Terminated on Both Ends RGEJ1024PHY 24 45 10 AWG (6mm) jumper bent lug on grounding 1 10 (0.61) strip side to straight lug on equipment provided with .16 oz. (5cc) of antioxidant and two each H. RGEJ1024PFY 24 90 1 10 Media 12-24 x 1/2 , M6 x 12mm, 10-32 x 1/2 and (0.61) Distribution M5 x 12mm thread-forming screws. RGEJ1036PFY 36 90 1 10 RGEJ1057PFY (0.91) I. Physical RGEJ1024URT* 24 Straight 10 AWG (6mm) jumper, 24 in. (609.6mm) L, 1 10 Infrastructure (0.61) pre-terminated with two 10 (5.3mm) stud hole Management ring terminals to provide a bolt-on solution for grounding network equipment. J. 6 AWG (16mm) Equipment Jumpers Factory Terminated on Both Ends Overhead & RGEJ624PHY 24 45 6 AWG (16mm) jumper bent lug on grounding 1 10 Underfloor (0.61) strip side to straight lug on equipment provided Routing with .16 oz. (5cc) of antioxidant and two each RGEJ624PFY 24 90 1 10 12-24 x 1/2 , M6 x 12mm, 10-32 x 1/2 and (0.61) K. M5 x 12mm thread-forming screws. Surface RGEJ636PFY 36 90 1 10 Raceway (0.91) RGEJ660U* 60 Straight 6 AWG (16mm) jumper, 60 in. (1524mm) L, 1 10 L. (1.52) pre-terminated with two straight slotted lugs Cabinets, to provide a bolt-on solution for grounding Racks & network equipment. Cable Management RGEJ696U* 96 Straight 6 AWG (16mm) jumper, 96 in. (2438.4mm) L, 1 10 (2.44) pre-terminated with two straight slotted lugs to provide a bolt-on solution for grounding M. network equipment. Grounding & Bonding 10 AWG (6mm) Equipment Jumper Factory Terminated on One End RGEJ1057PFY 57 90 10 AWG (6mm) jumper bent lug on grounding 1 10 (1.45) strip side provided with .16 oz. (5cc) of N. antioxidant and two each 12-24 x 1/2 , Industrial M6 x 12mm, 10-32 x 1/2 and M5 x 12mm thread-forming screws. 6 AWG (16mm) Equipment Jumper Factory Terminated on One End O. RGEJ657PFY 57 90 6 AWG (16mm) jumper bent lug on grounding 1 10 Labeling & (1.45) strip side provided with .16 oz. (5cc) of Identification antioxidant and two each 12-24 x 1/2 , M6 x 12mm, 10-32 x 1/2 and M5 x 12mm thread-forming screws. P. Cable An equal number of M6 x 12mm thread-forming screws also provided in each kit. Management *For use with VBlock preconfigured solutions. Accessories Q. Index For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see catalog back cover). www.panduit.com M.19X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Racks & Rack Cabinet Accessories category: Click to view products by Panduit manufacturer: Other Similar products are found below : M00-PLN F2424 8351-832-A-24 9104 9105 PLFF2000 H-9163-B 1427C3 HTS10 PC-79 SC10-3A SC4-28 CG3-340S/12 CP-001BK M6123-4007-SS AX61400TB TS170 LP40 5261304-07 CG3-160G 7112C-PLN ALUM CM10 8610-3124-S-26 TS81 7142 GP134 M6125-4007-A-24 M6127-4007-SS PBCOVER 512 AEG-4000G AEG-3000G HD99 SR2-66A2 FP10B4HP-1 FP52-2 1406-1006-01 29478 TS2535 TS169-6 CAC2 HA19-3U BR-19-10-1 TS180 CG3-ESD SC11-1 CFS-1.00/2.20 AX6145WM HEC0800PB ZC633R