TX7000 Category 7 S/FTP Outside Plant OSP Copper Cable SPECIFICATION SHEET specifications Category 7 OSP cable shall meet the IEC 61156-5 Category 7 and ANSI/TIA-568-C.2 Category 6A component standards. The conductors shall be 23 AWG with polyethylene insulation. The cable shall have a gel-filled construction and waterblock tape to prevent TX7000 Shielded Copper Cable moisture migration in underground and wet applications and a wide temperature range for extreme weather environments. The copper OSP: PSO7004BL-KED conductors shall be twisted in pairs each covered by a foil shield within an overall braided shield and a UV-resistant and abrasion- Mini-Com TX6A 10Gig resistant polyethylene (PE) jacket which is also flame retardant and Shielded Jack Module halogen free. Product is to be used in duct and conduit installations only. Not to be used in aerial or direct burial installations. Jack module: CJS6X88TGY TX6A 10Gig technical information Shielded Patch Cords Meters: STP6X**MIG Certified channel performance in a 4-connector configuration up to 100 Electrical performance: Feet: STP6X***IG meters and exceeds ISO 11801 Class Ea and ANSI/TIA-568-C.2 Mini-Com Angled All Metal Shielded Category 6A standards for supporting 10GBASE-T transmission over Modular Patch Panels twisted-pair cabling systems as part of the Panduit TX6A 10Gig Copper Cabling System. 24-port, 1 RU: CPA24BLY Certified component performance up to 100 meters and exceeds the IEC 61156-5 Category 7 and ANSI/TIA-568-C.2 Category 6A standards for sup- 48-port, 2 RU: CPA48BLY porting 10GBASE-T transmission over twisted-pair cabling. 72-port, 2 RU: CPA72BLY 23 AWG solid copper insulated with polyolefin Conductors/insulators: Mini-Com Flat All Metal Shielded Modular Patch Panels ISO 11801 Class Ea, IEC 61156-5 Category 7, ANSI/TIA-568-C.2 Standard compliances: Category 6A, IEC 60794-1-2F5 Method B Water Penetration Requirement 24-port, 1 RU: CP24BLY IEC 60332-1, IEC 60754-2, EN50575: Euroclass Eca, Flame rating: 48-port, 2 RU: CP48BLY Smoke classification: none 72-port, 2 RU: CP72BLY Meets IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt for PoE applications PoE Compliance: Cable Prep Tools 22 lbf (100 N) Installation tension: Wire -10C to 50C (14F to 122 F) during installation Temperature rating: snipping tool: CWST -40C to 75C (-40F to 167F) during operation Wire Black UV- and abrasion-resistant polyethylene (PE) Cable jacket: stripping tool: CJAST 8.5 mm (0.336 inch) nominal Cable diameter: **For lengths 1 to 10 meters (increments of one meter) and 1.5, 2.5, 15, 20 meters, change the 37 kg / 500m (82 lbs./ 1640 feet) Cable weight: length designation in the part number to the desired length. For standard cable colors other 500 meter (1640 feet) reel Packaging: than IG (International Gray) substitute IG Package tested to ISTA procedure 1A suffix with BL (Black), BU (Blue), GR (Green), RD (Red), YL (Yellow), OR (Orange), or VL (Violet) to the end of the part number. For key features and benefits example, the part number for a blue, 15-meter patch cord is STP6X15MBU. Ensures proper performance and provides quick installation Reel Print legend contains meter markings Descending length ***For lengths 3 to 20 feet (increments of one foot) and 25, 30, 35, 40 feet, change the length cable markings designation in the part number to the desired length. For standard cable colors other than IG Protects against environmental elements that can cause electrical Robust design (International Gray) substitute IG suffix with BL performance failures. (Black), BU (Blue), GR (Green), RD (Red), YL Waterproof gel and waterblock tape prevents moisture migration and (Yellow), OR (Orange), or VL (Violet to the end of Flooding compound and the part number. For example, the part number water ingress waterblock tape for a blue, 15-foot patch cord is STP6X16BU. Contact customer service for bulk packaged applications and/or keyed jack modules and patch cords TX7000 OSP Shielded Copper Cable is a component of the Panduit TX6A 10Gig Copper Cabling System. This end-to-end system provides a cost effective media for ensuring the most challenging network bandwidth needs are easily met today and tomorrow. Businesses are placing increased reliance on their networks to efficiently pass vital and time sensitive information throughout their enterprise. Key applications include: 10GBASE-T Ethernet Broadband Video 1000BASE-T Gigabit Ethernet POE, POE+, POE++ 10/100BASE-T Ethernet PRODUCT IS TO BE USED IN DUCT AND CONDUIT INSTALLATIONS ONLY. NOT TO BE USED IN AERIAL OR DIRECT BURY APPLICATIONS. www.panduit.com TX7000 Category 7 S/FTP Outside Plant OSP Copper additional specifications Me Mechanical Test Ultimate Breaking Strength >400 N (90 Ibf) Minimum Bend Radius 8 x Cable Diameter Electrical Test Nominal Velocity of Propagation (NVP) 79% nominal Operating Voltage, Maximum 80V cable construction Conductor Wire Conductor Wire Conductor Insulator Conductor Insulator Foil Shield Foil Shield Overall Braid Overall Braid JacJacketket WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2017 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP396--WW-ENG or by phone: 800.777.3300 6/2017