18900 Panduit Drive TDS: GMPO4 Tinley Park, IL 60487 Effective Date: 20AUG15 Customer Service: 800-777- Revision: 4 3300 Technical Data Sheet Thermal Transfer Printable Polyolefin Film This specification is intended to outline the physical and chemical properties of PANDUITs pressure sensitive thermal transfer printable polyolefin material and include the following part numbers and printable material identifiers: Part Number Prefixes Printable Material Suffixes TCT-*PO FJ6 TTC*POWH-C FJC-BK FJC FJT PRODUCT SPECIFICATIONS: Description: Material is RoHS compliant (European Union directive 2002/95/EC). Material is a top coated polyolefin film with a pressure sensitive adhesive. Print Methods: This material is recommended for thermal transfer printing. Adhesive: Acrylic based, pressure sensitive permanent adhesive. Standard Colors: White opaque matte Thickness: 4.0 +/- 0.6 mils (substrate and adhesive) Service Temperature Range: -40F to 180F (-40C to 82C) Minimum Application Temperature: -10F (-23C) Storage Conditions: Store at 70F (21C) and 50% Relative Humidity. For cassette products do not exceed 95F. PROPERTIES: PERFORMANCE: Peel Adhesion to Stainless Steel: Minimum 30 oz/in width (PSTC-101, 15 min. dwell) Shear Adhesion: Minimum 2 hours (PSTC-107, Procedure A) Tensile Strength: MD: minimum 7500 PSI (PSTC-131) TD: minimum 13000 PSI (PSTC-131) UV Resistance: *3000 hours no change observed (ASTM G154) Elevated Temperature Exposure: After 8 hours at 150F (65.5C) there was no deterioration of the substrate *3000 hours equates to 5 years of assimilated outdoor UV exposure. Page 1 of 2 2005 PANDUIT Corp TDS: GMPO4 18900 Panduit Drive TDS: GMPO4 Tinley Park, IL 60487 Effective Date: 20AUG15 Customer Service: 800-777- Revision: 4 3300 Technical Data Sheet CHEMICAL/SOLVENT RESISTANCE: The testing was conducted at room temperature. Samples were thermal transfer printed with Panduit RMR*BL/RMER*BL ribbon on the Panduit TDP43MY/TDP43ME printer. Separate sets were conditioned for 24 hours before being immersed in the following solvents for a period of 1 hour and 24 hours. After the samples were removed for the immersed solvents, they were rubbed 10 times with a lint free gauze. Visual observations were noted for any smear or loss of legibility. 1 Hour Immersion Chemical/Solvent Visual Observation Jet Fuel No change Gasoline Loss of print legibility Methyl Ethyl Ketone Loss of print density 1:1:1 TCE No change Trichloroethylene No change 409 Cleaner Loss of print legibility Alpha Flux 200L No change 24 Hours Immersion Chemical/Solvent Visual Observation Isopropyl Alcohol No change Water 150F No change Salt Water No change SAE 30 Motor Oil No change Hydraulic Fluid No change Skydrol Loss of print legibility Methanol/Water No change Ethylene Glycol Loss of print legibility ASTM 3 Oil Loss of print legibility APPROVALS: UL Recognized: UL 969 File Number: MH14979 LIMITED WARRANTY All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered or misused in any way. Use of PANDUIT printers with any product other than t he specified PANDUIT products for which the printer was designed constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and manufacturer. NEITHER PANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER. THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. Page 2 of 2 2005 PANDUIT Corp TDS: GMPO4