TM3S10-C186 Panduit

Product Bulletin Metal Detectable and Antimicrobial Metal Detectable Cable Ties and Mounts Offering Metal Detectable Cable Ties and Mounts are designed to help the food, beverage, and pharmaceutical industries meet product manufacturing safety standards. Metal impregnated material, these metal detectable products are identifiable by metal detection equipment. Compliant with the U.S. Food and Drug Administration HACCP* standards and the European Union (EU) hygiene monitoring regulations Metal Detectable Cable Ties and Mounts are available in Antimicrobial Nylon 6.6., Nylon 6.6, or Polypropylene. Panduit Cable Tie Installation Tools temporarily hold the cut-off tips to help further prevent process stream contamination. * HACCP = Hazard Analysis and Critical Control Points a systematic preventive approach to food and pharmaceutical safety that addresses hazards as a means of prevention rather than finished product inspection. Key Features Benefits Cable Ties and Mounts Allows a cable tie or cable tie mount to be identified by metal detectors helping to reduce Metal impregnated material contamination in finished products Contributes to compliance of manufacturing standards and HACCP regulations to demonstrate due diligence for consumer safety and quality inspections Suitable for use in a variety of environments, including areas subjected to harsh cleaning Choice of polypropylene solvents providing long term durability (see material properties chart on page 2) or nylon material Suitable for use in Food and Beverage facilities, protects against bacteria contamination. Choice of Antimicrobial (see material properties chart on page 4) Material Distinct color per common industry practices provides easy identification on conveyor belts Blue color and in finished products, reducing waste due to product contamination Cable Ties Provides low thread force for easy and reliable installation which improves productivity One-piece cable tie design and reduces the potential for operator fatigue with locking wedge Easy to pick up tie from flat surfaces allows faster initial threading Curved tip Safe and easy for installers to use, wont damage cable Smooth, round edges Mounts Holds cables securely in place provides maximum stability for cable bundle Cradle design mount Keeps bundle close to mounting surface and conserves space Low profile design mountAntimicrobial Metal Detectable Cable Ties and Mounts Ordering Information Antimicrobial Nylon Metal Detectable Cable Ties and Mounts Compliant to ISO 22196 Standard and CFR-21, HARPC (mandated by FDA) and maintaining GMP Offers food and beverage facilities protection against bacteria contamination Cable Ties Max. Min. Loop Head Head Bundle Tensile Std. Length Width Thickness Height Width Diameter Strength Recommended Pkg. Part Number In. (mm) In. (mm) In. (mm) In. (mm) In. (mm) In. (mm) Lbs. (N) Tools Qty.* Miniature Cross Section PLT1M-C86A 3.9 (100) 0.098 (2.5) 0.044 (1.1) 0.186 (4.8) 0.188 (4.8) 0.87 (22) 18 (90) GTS-E, GS2B-E 100 Intermediate Cross Section PLT2I-C86A 8.0 (203) 0.135 (3.4) 0.047 (1.2) 0.180 (4.6) 0.240 (6.1) 2.00 (51) 30 (133) GTS-E, GS2B-E 100 Standard Cross Section PLT2S-C86A 7.3 (186) 1.85 (47) 100 GTS-E, GS2B-E, PLT3S-C86A 11.5 (291) 3.00 (76) 100 0.190 (4.8) 0.057 (1.4) 0.240 (6.1) 0.320 (8.1) 50 (222) GTH-E, GS4H-E PLT4S-C86A 14.4 (366) 4.00 (102) 100 Light-Heavy Cross Section (Straight Tip) PLT3H-L86A 11.1 (282) 3.00 (76) 50 0.480 0.300 (7.6) 0.075 (1.9) 0.360 (9.1) 120 (534) GTH-E, GS4H-E PLT4H-L86A 14.4 (366) 4.00 (102) 50 (12.2) Cable Tie Mounts A B C Counterbore Std. Used With Width Length Height Diameter Mounting Pkg. Part Number Cable Ties In. (mm) In. (mm) In. (mm) In. (mm) Method Qty.* TM2S8-C86A Min., Int., 0.630 0.422 0.275 0.325 8 (M4) screw 100 Std. (16.0) (10.7) (7.0) (8.3) TM3S8-C86A Std., 0.867(22.0) 0.614 0.373 0.325 (8.3) 8 (M4) screw 100 Lt. Hvy. (15.6) (9.5) TM3S10-C86A 0.385 (9.8) 10 (M5) screw 100 *Order number of pieces required in multiples of standard package quantity. Quality Assurance All cable tie and mount packages contain a quality control number for complete product traceability each lot passes metal detection as part of final product verification. 2