SmartZone Gateway EPA126 SPECIFICATION SHEET specifications The Gateway EPA126 is installed as part of a primary/secondary topology and provides support for up to six connected power devices, 12 environmental sensors and two access control devices all through a single IP address. The gateway will allow for expansion of additional power devices, without need for additional network ports, using the Gateway EPAX18 Expansion Unit that connects to the base unit. The Gateway EPA126 consolidates all data captured from the connected power devices and sensors and displays baseline operational data through a web interface or via SmartZone Software platforms. The gateway supports keypad or card reader devices to provide cabinet access control. The gateway supports theope Simple Network Management Protocol (SNMP) to allow monitoring for conditions that warrant administrative attention via any network management system that supports the SNMP protocol, as well as supporting HTTP/HTTPS protocols for remote management capabilities. technical information Model Number: Eagle-i (U-ZAEI-y) Dimensions: 18 in. x 4.5 in. x 1.7 in. (465mm x 114mm x 44 mm) Weight: 4.76 lbs. (2.16Kg) 6.75 lbs. (3.06Kg) packaged Packaging: 1.98 lbs. (0.9Kg) Mounting: 19 rack mountable, housed in a 1RU metal case key features and benefits Centralized device Connects up to six connected power devices, 12 environmental sensors and two access control devices into one intelligent management gateway to consolidate monitoring and management of operational data, simplify troubleshooting, and allow faster polling of data Single IP address Allows all connected power devices and sensors to be combined through one single gateway IP address, reducing the need for separate IP ports, IP capital costs, and management overhead Primary/secondary Houses the intelligence and power supply for connected devices within the gateway itself to simplify the network network topology architecture and lower overall power consumption Access and Powers access control card readers on cabinets and manages encrypted access data to support smart card technologies control security and other readers that enhance data center security Scalable design Allows Gateway EPA126 to be attached to the Gateway EPAX18 Expansion Unit to provide additional power device inputs through the gateways single IP address, enabling cost-effective monitoring scalability and growth SNMP enabled Uses open SNMP protocol to provide alerts (traps) on potential service impacting power and environmental conditions to mitigate operational downtime HTTP/HTTPS Provides authentication safeguards to securely allow users to configure, monitor, and control the gateway through web interface remote management SmartZone Software Consolidates power and environmental data to be utilized by SmartZone Software platforms for real-time monitoring platform integration and display, management, and automated documentation applications The SmartZone Gateway EPA126 is an innovative, SNMP based gateway that simplifies the management of power devices and sensors with one IP address, significantly reducing the number of IP addresses needed in the data center. This management information can then be displayed via an internal web interface or utilized by SmartZone Software platforms for real-time monitoring, management, and automated reporting of operational metrics. SmartZone Gateways are scalable solutions, ideally suited to brownfield or greenfield data centers and telco areas. When coupled with the SmartZone Gateway EPAX18 Expansion Unit, the number of power devices that can be monitored increases from 6 to 24, significantly improving flexibility and scalability. The SmartZone Gateway EPA126 supports up to six connected power devices, 12 environmental sensors and two access control devices. To enhance cabinet security, the Gateway EPA126 supports keypads or HID card readers, which, when used with electronic handles, provide secure access to the cabinet. www.panduit.com SmartZone Gateway EPA126 Gateway EPA126 test data Power Supply Cable Wire Input Power 100~240 VAC Input Connector 2 x IEC C14 Inlet Power Consumption (Max) 40W Additional Information Isolated supply Internal PSU Dual Operating Environment Operating Temperature 32F to 113F (0C to 45C) Storage Temperature 14F to 158F (-10C to 70C) Operating Humidity 15% to 85% RH Storage Humidity 5% to 90% RH MTBF >100,000 Hrs. Connectivity and Networking Network Type Ethernet (802.3u) Network Connection RJ45 Link Speeds 10/100 Mbps with auto negotiation Network Indications Connection LED (Green) Network Speed LED (Yellow) Sensors Number of Inputs 12 sensor inputs Input Connector 8-way RJ45 Parameters Monitored Temperature, humidity, smoke, door contact, shock, water, PIR, airflow sensors, and any 0-10 VDC output sensor Temperature Monitoring Range 32F to 140F (0C to 60C) Temperature Monitoring Accuracy 5% Standard Transducer 68F (20C) Humidity Monitoring Range 30% to 90% relative humidity Humidity Monitoring Accuracy 5% RH 77F (25C) Analogue Resolution 12 Bit A/D for analogue inputs Additional Information Inputs are not isolated auto detection of supported sensors Access and Control Access 2 ports that support 2x5 Keypad or HID Card Reader Control 4 relay output ports for controlling flashing beacons, or electronic handles PDU Monitoring and Control Number of Inputs 6 inputs for connected power monitoring devices PDU In/Out Connector RJ45 Parameters Monitored Volts, amps, total kVA, total kWh, total power factor, and frequency Voltage Monitoring Range 0V to 500V Current Monitoring Range 0A to 65A kWh Monitoring Range 0 kWh to 429496729 kWh kWh Monitoring Accuracy Dependent on PDU kWh Monitoring Accuracy Dependant on PDU 2