64018 Parallax

Web Store: www.parallax.com Sales: (888) 512-1024 Tutorials: learn.parallax.com Educator Hotline: (916) 701-8625 Sales: sales parallax.com Office: (916) 624-8333 Tech Support: support parallax.com Fax: (916) 624-8003 P2 Edge 80-Pin Adapter Kit ( 64018) The P2 Edge 80-Pin Adapter provides a compact breakout for the P2 Edge Module ( P2-EC), bringing all of the Propeller 2 multicore microcontroller pins to 4 rows of 20-way standard 0.1 pin header pads. This adapter is supplied as a kit comprising the PCB, vertical edge socket and four 1x20 0.1 pin headers. The kit ships unassembled to provide complete flexibility. On the PCB topside, the standard connections are marked with white printed lines. All connections are made on the bottom of the PCB for visibility even when the Edge Socket has been installed. This also allows the trace connections to be cut and alternative connections made without needing to remove the Edge Socket. The top two mounting holes are connected to the top-side copper plane and the two non-connected P2-Edge pads. These holes could be left isolated or connected to a signal or power rail as required. The bottom two mounting holes are connected to the bottom-side copper plane and the two 5VDC P2-Edge Module Power Input pads. The 20-pin header spacing is suitable for a breadboard. One possible configuration would be to solder the outer header pins downward, and the inner header pins upward. In this way, the adapter may be plugged into a breadboard, and the upward pins would be accessible to jumper wires. Another configuration would be to have all the headers pointing upward, and thus use the adapter as a breakout board with jumper wires. Features Vertical socket for the Parallax P2 Edge Module ( P2-EC) PCB comes unpopulated for complete flexibility Supplied with four 1x20 0.1 male pin headers Mounting holes at each corner, with two connected to 5VDC IN and two unconnected Copyright Parallax Inc. P2 Edge 80-Pin Adapter Kit ( 64018) v1.1 11/16/2020 Page 1 of 3 Key Specifications Operating temperature: -40 to +185 F (-40 to +85 C) Mounting holes: 2.4mm diameter PCB Dimensions: 2.3 x 0.8 in (58.5 x 20.3 mm) P2 Edge Socket Pinout (PCB Bottom View) 4x 20way Pin Header Pinouts (PCB Bottom View) Copyright Parallax Inc. P2 Edge 80-Pin Adapter Kit ( 64018) v1.1 11/16/2020 Page 2 of 3