Web Site: www.parallax.com Office: (916) 624-8333 Forums: forums.parallax.com Fax: (916) 624-8003 Sales: sales parallax.com Sales: (888) 512-1024 Technical: support parallax.com Tech Support: (888) 997-8267 ActivityBot Speaker Mount ( 725-32905) This kit provides a convenient means to mount a veho360 speaker to the ActivityBot robot s chassis, conveniently near the Activity Board s audio jack. Along with a veho360 speaker (sold separately) it s a key accessory to equip your robot to play tunes, make sound effects, or report sensor data from audio files stored on its microSD card. ActivityBot Speaker Mount Kit Parts Kit and veho360 speaker on an ActivityBot Bill of Materials Part Quantity Description 720-00011 1 Universal L Bracket, aluminum 700-00024 1 Lock-nut, 4-40 700-00028 4 Screw, 4-40, pan-head, 1/4 721-00060 1 ActivityBot veho360 speaker bracket Additional Items Required Built and tested ActivityBot robot ( 32500) veho360 speaker ( 900-00018) Parallax Screwdriver (included in the ActivityBot kit) or 1 Phillips screwdriver Parallax Combination Wrench (included in the ActivityBot kit) or similar Copyright Parallax Inc. ActivityBot Speaker Mount ( 725-32905) v1.0 10/17/2013 Page 1 of 4 Assembly Instructions STEP 1 Insert two screws through the longer arm of the aluminum L bracket, and align speaker bracket holes with the screws, as shown at right. Notice the U-shape goes to the right. You can put one screw in the top hole and one in the slot (as shown), or put both in the slot. The choice is yours. STEP 2 With the screwdriver, drive the screws into the holes in the speaker bracket. It is made of Delrin, so the screws will self-tap and stay firmly in place without needing nuts. STEP 3 Insert a screw through the outer hole in the shorter arm of the L bracket. Drive the screw into the lock-nut, using the wrench to hold the nut securely. Copyright Parallax Inc. ActivityBot Speaker Mount ( 725-32905) v1.0 10/17/2013 Page 2 of 4