Solenoids Series 66 Latching Solenoid GENERAL DESCRIPTION DC Pulse Operated Magnet maintained for zero power consumption Ideal for low energy applications (i.e. Dry Cells) PERFORMANCE Item Specification Dielectric Strength 500V RMS 50Hz Drive details (i) DC control 5, 6, 12, 24 & 48V available as standard. (released by polarity reversal (ii) 3, 5, 10 & 20 watt versions available as standard. Max pulse duration shown in fig. 1. (iii) Single coil construction. apply +ve on Red to operate and -ve on Red to release. An External force is required to retract the plunger to the open position. Permanent Magnet 0.48Kgf typical holding force. (measured after applying rated voltage at 25 C) Weight 35g Plunger: 9g Operating Temperature -5 C to + 75 C FORCE/STROKE CURVES & ON TIME ELECTRICAL MECHANICALDIMENSIONS (mm) CODING 6 6 1 2 0 6 X X X X 0 Pull type 1 0 Push type 2 0 Pull type with push off spring 1 1 Push type with push off spring 2 1 5W 3W 10W 20W 51 5V 50 52 53 55 6V 54 56 57 63 12V 62 64 65 73 24V 72 74 75 85 48V 84 86 87 BLP products are designed, manufactured and tested to ISO 9001 quality standards. BLP Reserve the right to change without prior notice the information contained in this leaflet. BLP Components Ltd., Exning Rd, Newmarket, Suffolk CB8 0AX, England Tel: +44 (0)1638 665161 Fax: +44 (0)1638 660718 Email: sales blpcomp.com Website: