SKC-F1.5 PEM

PEM KEYHOLE fasteners are designed for quick panel attachment and reduction of loose hardware. NEW - SKS-R Fasteners Provide high side-load in verticle component mounting applications SK SELF-CLINCHING KEYHOLE FASTENERSKEYHOLE STANDOFFS AND FASTENERS PEM KEYHOLE Standoffs and sheet joining fasteners are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. These standoffs and fasteners can save valuable time and dramatically reduce the amount of loose hardware required. SKC/SK4 standoffs can be used for spacing or mounting of replaceable components. Typically, several standoffs are used with one standard PEM threaded standoff which accepts a screw to secure the board or component against any unwanted movement. Allow detachable spacing of two sheets Clinch feature mounts fastener permanently and flush into metal sheet Unique barrel design allows for quick attachment and detachment Makes horizontal or vertical component mounting possible SK4 standoffs are available for installation into stainless steel sheets SKC-F/SK4-F/SKS-R fasteners are designed so that two sheets can be quickly joined flat against each other. Typically, several fasteners are used with one standard PEM threaded F flush nut (PEM Bulletin F) which accepts a screw to secure the sheets against any unwanted movement. Allow detachable spacing of two sheets Clinch feature mounts fastener permanently and flush or sub-flush into metal sheet Unique barrel design allows for quick panel-on-panel attachment and detachment SKC-F/SK4-F Fasteners Can be clinched into blind hole where concealed head is required Makes horizontal or vertical component mounting possible NEW SK4-F fasteners are available for installation into stainless steel sheets SKS-R fasteners are designed to provide high side-load in verticle component mounting applications SKS-R fasteners are available for various top sheet thicknesses and hole sizes SKS-R Fasteners Drawings and models are available at www.pemnet.com PEM Dimple (Registered Trademark) SKC/SK4 Standoffs SKC-F/SK4-F Fasteners SK-2 PennEngineering www.pemnet.com 2021 PennEngineering.