TPS-187-12 PEM

PEM brand self-clinching studs and pins install permanently in aluminum, steel or stainless steel sheets. FH SELF-CLINCHING STUDS AND PINSSELF-CLINCHING STUDS AND PINS PEM self-clinching studs are easily installed by placing them in properly sized holes in sheets and squeezing into place with any standard press: Install permanently in aluminum, steel or stainless steel in sheets as thin as .020 / 0.51 mm. High torque-out and pushout resistances. Dog Point and Anti Cross-Thread Options - HFE/THFE (heavy-duty) studs Provides PAGE 4 maximum pull through in sheets as thin as .031 / 0.8 mm - PAGE 10 FH/FHS/FHA (flush-head) studs are HFG8/HF109 (heavy-duty high tensile available in aluminum, steel, or stainless strength) studs are manufactured for the steel - PAGE 5 most demanding applications from medium carbon alloy steel, then heat-treated to high FH4/FHP (flush-head) studs are designed strength and hardness qualities - PAGE 11 to provide strong threads in stainless steel sheets as thin as .040/1 mm. FHP studs have HFLH studs are for installation into thin, high corrosion resistance - PAGE 6 harder, high-strength materials - PAGE 12 FHL/FHLS (flush, low-displacement head) SGPC swaging collar studs can install studs have a smaller head diameter and install into most panel material and accommodate closer to the edge of a sheet than PEM FH/FHS multiple panels as long as the total thickness studs - PAGE 7 does not exceed the maximum sheet thickness - PAGE 13 TFH/TFHS (non-flush) studs are for sheets as thin as .020 / 0.51 mm. The stud FHX flush-head studs with X-Press thread head will project above the sheet surface profile are typically used with push-on or approximately .025/0.64mm - PAGE 8 other plastic fasteners - PAGE 14 HFH/HFHS (heavy-duty) studs have a FH/FHS/FHA (flush-head) Pins are large head which projects above the sheet available on special order - PAGE 15 material to distribute the axial tightening force over a large area thereby improving pull TPS/TP4/TPXS (flush-head) pilot pins through resistance - PAGE 9 satisfy a wide range of positioning, pivot, and alignment applications - PAGE 16 HFHB (heavy-duty BUSBAR) studs are Material and finish specifications - PAGE 17 ideal for applications which demand superior electrical/mechanical attachment points - Installation - PAGES 18 - 29 PAGE 9 Performance data - PAGES 30 - 36 PAGE 5 PAGE 7 PAGE 8 PAGE 9 PAGE 10 Flush-head studs Flush, low-displacement head studs Thin sheet studs Heavy-duty studs Heavy-duty studs for thin sheets Types FH/FHA/FHS/FHP/FH4 Types FHL/FHLS Types TFH/TFHS Types HFH/HFHS/HFHB Types HFE/THFE FH-2 PennEngineering www.pemnet.com 2021 PennEngineering.