FP02-Q-3U Penn Elcom

PRODUCT DATA SHEET FP02-Q-3U 3U HEAT EXTRACTOR PANEL NEW Low noise 3U Heat Extraction Units are designed to be fitted into the front or back of a 19-inch rack to suck hot air out of an enclosure. As hot air rises the best results will be achieved by mounting them at the top of the cabinet. A DC-DC link socket is provided, so two or more units can be linked together a higher power PSU must be used. Each extractor can also be controlled by a CRC-TEMP thermal sensor. A washable dust filter panel is also available as an accessory. Technical Specifications Low Noise 22.5dBA (0.3 Sone) 200CFM (336m/h) 1,350RPM High Static Pressure 2 x 9 Bladed 120mm Fans 12V DC - 500mA 2 x DC In/Out Sockets Temperature Sensor Socket DC in/out sockets 500mA world wide universal PSU supplied Mounting Holes align with EMS enclosure range Dimensions (OD) 483mm x 133.4mm x 55mm (19 x 5 x 2 ) Combined Weight 1.5Kgs Fluid Bearings = 2 Year Limited Warrantee The life span of these Swiss Designed fans has been extended with the use of a Japanese Dual Ball Bearing bush & fluid giving continuous operation 24/7 without compromise. Dust and high temperatures have less effect than standard bearings - the perfect choice for reliability. The fans life span is up to 5 times longer than comparative models. IF NOT USING THE DUST FILTER PANEL REGULAR MONTHLY CLEANING OF THE FAN BLADES TO REDUCE ANY DEPOSIT BUILD UP IS ADVISED USE A SMALL PAINT BRUSH DO NOT USE AN AIR BLOWER WITHOUT STOPPING THE BLADES Thermal Control A thermal sensor accessory, the CRC-TEMP can be Plugged into the TEMP socket. It is set to operate at 40 and will reset at 30, + or - 2. Using the acrylic adhesive pad, it should be attached to an area where the sensor can pick up the ambient temperature of the equipment being cooled, and NOT directly to the main heat source. CRC-TEMP Power Supply The World Wide Universal PSU 12V DC 500A supply that is supplied to power these 2 Fans. CRC-PSU1 2015 Design Copyright of Rackz Ltd FP02Q 3U HEAT EXTRACTOR PANEL is made in the UK for the PENN ELCOM GROUP - E&OE