3RG6342-3JK00 Pepperl & Fuchs

Siemens AG 2008 SIMATIC PXS sonar proximity switches SIMATIC PXS100 Overview SIMATIC sensors PXS100 K0 compact range, 3SG16 compact form, Sonar thru-beam sensor Selection table 2 SIMATIC PXS100 K0 compact range Sonar thru-beam sensor 3SG16 compact form Fixed sensor head Separate sensor head 6 ... 30 20 ... 100 6 ... 30 20 ... 100 5 ... 150 20 ... 100 Sensing range (cm) Operating mode Diffuse sensor Reflex sensor Thru-beam sensor Output 1 switching output 2 switching outputs Analog output 0 ... 10 V Adjustment 1 potentiometer Jumper plug Connection M8 connector M12 connector Cable Terminals Degree of protection IP65 IP67 2/18 2/22 2/20 See page A configurator for fast product selection and ordering in the Internet can be found at www.siemens.com/simatic-sensors/px Siemens FS 10 2009 2/17 Siemens AG 2008 SIMATIC PXS sonar proximity switches SIMATIC PXS100 K0 compact range Overview Design The devices of K0 compact range are supplied in the standard version with permanently installed sensors. The devices of K0 compact range can also be supplied with separate sensors. Due to its small dimensions, the sensor is especially suitable in confined spaces. The ultrasonic sensor is installed in a cylindrical enclosure separated from the other electronics. In 3RG63 42 devices, the 2 sensor is installed in an M18 shell and in 3RG63 43 devices it is installed in an M30 shell with a length of 25 mm in both cases. Two nuts are supplied for fixing. The connecting lead of 1.6 m in length is molded onto the sensor. The connection to the evalua- tion electronics located in the enclosure of K0 compact range is established via the preassembled coaxial cable plug. The plug- in socket is installed on the end face of the enclosure. Function K0 compact range is designed for simple applications. The devices are only suitable for operation as diffuse sensors. The sensors can be supplied with analog outputs. The end of operating range or analog range can be set using a potentio- meter. Up to 6 devices can be synchronized with each other. K0 compact range with separate and fixed sensor The Sonar proximity switches of K0 compact range are ready-to- use units with a rectangular enclosure. They are available with two sensing ranges. Operate as diffuse sensors Adjustable via potentiometer Can be synchronized Temperature compensation Solid-state outputs: - switching output - analog output Connection via M12 connector, type F Technical specifications Type 3RG63 42 3RG63 43 Sensing range cm 6 ... 30 20 ... 100 Standard target cm 1 1 2 2 Hysteresis H mm 5 10 Repeat accuracy R mm 0.45 1.5 Operational voltage (DC) V 10 ... 35 (including 10% residual ripple, at 10 18 V sensitivity reduced by approx. 30%) Rated operational current I mA 100 e No-load supply current I mA max. 35 0 Ultrasonic frequency kHz 400 200 Switching frequency f Hz 8 5 Response time ms 70 90 Power-up delay t ms 7 7 v Switching status display Yellow LED Enclosure material CRASTIN epoxy resin converter surface Degree of protection IP65 IP68 with separate sensor Ambient temperature During operation C 0 ... +55 During storage C 40 ... +85 Siemens FS 10 2009 2/18