AQ10A-050BP-H Phihong

WWW.PHIHONG.COM 10W Compact Fixed Blade USB Adapter Features Fixed Blade Low Cost Very low leakage OVP, OCP and short circuit protection Level VI Compliant Applications Tablets Personal Electronics Portable GPS Devices Digital Camera Safety Approvals cULus 62368-1 CB (IEC62368-1) CE Output Specifications DC Regulation 1 Model Max Ripple Plug Safety Case Output Load (pk-pk) Type Approvals Color Line Load Voltage 2 AQ10A-050B-H 5V 2.4A 150mV 5% US UL Black 3 AQ10A-050BP-H 5V 2.4A 150mV 5% US UL Black 2 AQ10A-050BW-H 5V 2.4A 150mV 5% US UL White 2 AQ10E-050B-H 5V 2.4A 150mV 5% EU CE/CB Black 3 AQ10E-050BP-H 5V 2.4A 150mV 5% EU CE/CB Black 2 AQ10E-050BW-H 5V 2.4A 150mV 5% EU CE/CB White 2 AQ10K-050B-H 5V 2.4A 150mV 5% UK CE/CB Black 2 AQ10K-050BW-H 5V 2.4A 150mV 5% UK CE/CB White Notes 1. Measuring is done by 20MHz bandwidth oscilloscope and terminated each output with a 10uF aluminum electrolytic capacitor and a 0.1uF ceramic capacitor. 2. Special Order MOQ 3. The AQ10A-050BP-H and AQ10E-050BP-H support 5 charging methods: a. Divider 1 (DCP Applying 2V on D+ Line and 2.7V on D- Line) b. Divider 2 (DCP Applying 2.7V on D+ Line and 2V on D- Line) c. USB Battery Charging Specification Revision 1.2 (BC1.2) d. Chinese Telecommunications Industry Standard YD/T 1591-2009 e. 1.2V on both D+ and D- lines Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 2/10/2020 1 AQ10 Characteristics WWW.PHIHONG.COM INPUT: ENVIRONMENTAL: AC Input Voltage Rating Temperature 100 to 240VAC Operation 0C to +40C Non-operation -20C to +70C AC Input Voltage Range Humidity 90% 90 to 264VAC Emissions AC Input Current Complies with FCC Class B 0.28A (RMS) max at 115VAC/60Hz Complies with EN55032 Class B 0.16A (RMS) max at 230VAC/50Hz Immunity Leakage Current ESD: EN61000-4-2 125uA max 264Vac/50Hz RS: EN61000-4-3 EFT: EN61000-4-4 Inrush Current (cold) Surge: EN61000-4-5 <60A max 230VAC/50Hz Dip: EN61000-4-11 (Cold start ambient 25C) Dielectric Withstand (Hi-pot) Test Input Power Saving Primary to Secondary: 3000VAC, 10mA, 75mW no load at 230VAC/50Hz for 1min Insulation Resistance OUTPUT: Primary to Secondary: >10M ohm 500VDC, Power 1 min 10W Continuous 2 FEATURES Efficiency Over-voltage Protection DOE Level VI Output voltage shall not exceed 8V CoC V5 Tier 2 Over-current Protection Hold-up Time Output current shall not exceed 3A 6mS min at 115Vac/60Hz Short Circuit Protection Auto recovery and no component damage DC Output Connector USB A Notes: 1. The characteristics defined are at ambient temperature of 25C unless otherwise specified 2. Efficiency is measured after 30 minutes burn-in