WWW.PHIHONG.COM 24W Adapter Style Constant Current LED Driver PDA024A Wall Plug LED Power Supply Features Low Profile Design IP20 Rated OVP, IOCP, Over-Load and Short- SELV Compliant Circuit Protection UL 8750 Compliant 0.9 Power Factor Correction Very Low Leakage Low Cost Fixed Wall Plug Class 2 Output Applications Indoor Lighting Under Counter Lighting Case Display Lighting Floor Lamps Safety Approvals cUL/UL Mechanical Characteristics Length: 90.5mm (3.56in) Height: 38mm (1.49in) Width: 55.5mm (2.19in) Weight: 125g (4.41oz) Output Specifications DC Output Voltage Output Output Model Current Min. Typ. Max. Power PDA024A-700S-R 24V - 34V 700mA 24W PDA024A-1A0S-R 16V - 24V 1000mA 24W PDA024A-1A5S-R 11V - 16V 1500mA 24W Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 1/7/2015 WWW.PHIHONG.COM PDA024A Characteristics INPUT: EMC AC Input Voltage FCC Part 15 Class B 90 to 132VAC Immunity Nominal AC Input Voltage EN61000-4-2 110 to 120VAC EN61000-4-4 EN61000-4-5 Leakage Current <0.5mA at 120VAC and maximum load Isolation Test Primary to Secondary: 3000VAC, <10mA, 1 minute Maximum Input Current 500mA at full load, 110VAC Insulation Resistance Primary to Secondary: 500VDC, >5M ohm, 1 No-Load Power Draw minute <300mW at 115VAC, 60Hz FEATURES: OUTPUT: Input Current Protection Total Output Power The input power line will be fused with a 2A/250V 24W maximum time-lag fuse Efficiency Short Circuit 82% at nominal input voltage, full load Auto restart without damage Meets Level V efficiency marking requirements Output Overvoltage Protection Power Factor Output should not exceed voltage limits, auto shut 0.9 at nominal input voltage, full load down ENVIRONMENTAL: AC Input Operating Temperature 0 to +40C Fixed Blade (North America) Storage Temperature -40 to +85C DC Output Operating Humidity 10 to 95% 2.1mm x 5.5mm x 9.5mm center positive barrel Ingression Protection IP20 plastic housing Dimension Diagram Unit:mm