Single Port 15.4W Power-over-Ethernet Passive Power Injector Features No Detection passive injector Non-Vented Case Gigabit Data Rates DoE Level VI Compliant ErP/Ecodesign Directive 2009/125/EC Regulation EU 2019/1782 Compliant Small Case Size Full Protection OCP, OVP Low Cost 1-year Warranty Applications IP telephones Wireless Network Access Points Security Cameras Phihong Taiwan - No.568, Fuxing 3rd Rd., Guishan Dist.,Taoyuan City (33383), Taiwan, ROC Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date Phihong USA - 47800 Fremont Blvd. Fremont, CA 94538, USA specifications and contact information. Revised 10/26/2021 Phihong Europe - Wattstraat 50, 2171 TR Sassenheim, The Netherlands 1 POE15M-560 Specifications 2 Model POE15M-560-R POE15M-560E-R DC Output Voltage 56.0V 56.0V Max Current 0.275A 0.275A Output Power 15.4W 15.4W Output Data Speed 1G 3 Regulation +1V, -2V 4 Ripple & Noise P-P(max) 200mV AC Input Voltage Range 90 to 264VAC AC Input Frequency 47 to 63Hz Input Current 0.5A (RMS) max for 90VAC, 0.35A (RMS) max for 240VAC No Load Power Consumption 0.040W 0.047W at 115VAC Input No Load Power Consumption 0.063W 0.073W Input at 230VAC Input 5 115VAC Average Efficiency 90.17% 85.47% 5 230VAC Average Efficiency 88.55% 85.22% 5 230VAC 10% Load Efficiency 75.58% 69.24% Leakage Current 0.25mA max for 254VAC/50Hz Over-Voltage 120V, Latching Protections Over-Current 400mA Short Circuit Continuous. No damage. Operating Temperature -20C to +50C Environmental Non-Operating Temperature -25 to +75C Operating Humidity 5 to 90% RH max Dielectric Withstand (HI-POT) Primary to Secondary: 4242VDC for 1 sec, 10mA Insulation Resistance Primary to Secondary: >10M ohm for 500VDC Standards cULus 60950-1, cULus 62368-1, IEC 60950-1, IEC 62368-1 FCC Part 15 Class B, CAN ICES-003(B)/NMB-003(B), Safety EMI Emissions EN 55032/CISPR 32 Class B Conducted and Radiated Approvals and EMC Harmonic Current Emissions IEC 61000-3-2 Voltage Fluctuations & Flicker IEC 61000-3-3 EN 55024/CISPR 24: IEC 61000-4-2 (Contact: 4KV, Air: 8KV), Immunity IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5 ( 2kV), IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 Dimensions (L x W x H) 106.2mm (4.18in) x 40.0mm (1.56in) x 27.3mm (1.07in) Weight 100g Input Connector IEC320 C6 Mechanical Output Connection +pins 3,6/ -pins 1,2 Data In/Output Connector Unshielded RJ45 Shielded RJ45 LED Indicators Solid Blue: Power ON 1. The specifications defined are at ambient temperature of 25C, unless otherwise specified. 2. Not recommended for new designs (NRND). Minimum order quantities apply. 3. Voltage to be measured within 2 of the output RJ45 connector. Notes 4. 20MHz bandwidth frequency oscilloscope, add a 0.1F multilayer Cap. and Low ESR Electrolytic Cap. (10F) at output connector terminals (nominal line voltage, full load). 5. Efficiency is measured after 30 minutes burn-in. Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 10/26/2021