WWW.PHIHONG.COM 4-Port 240W Multi-Gig Power-over-Ethernet Midspan IEEE802.3bt Compliant Power Injector Features IEEE802.3bt Compliant Shielded DC Jacks Compliant with Phihong Proprietary OCP, OVP and Short Circuit 12.5K Detection Protections Diagnostic LEDs Limited Power Source 1 Year Warranty Broken Wire Detection 2.5 Gigabit Compatible Optional SNMP Management Applications Satellite Receiver Security Cameras Wireless Network Access Points Kiosks LCD Displays Computer Workstations Safety Approvals UL/cUL 60950-1 IEC60950-1 UL/cUL 62368-1 IEC62368-1 CE Mechanical Characteristics (Standard Model) Length: 224mm (8.82in) Height: 48.5mm (1.91in) Width: 200mm (7.87in) Weight: 1.59Kg (3.5lbs) Output Specifications DC Load Regulation of Data Model Output SNMP Ports Speed Line Load Voltage Min. Max. POE240U-4BT-R 4 2.5G 56V 10mA 1.07A 53-57V No POE240U-4BT-N-R 4 2.5G 56V 10mA 1.07A 53-57V Yes Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 10/26/2021 1 POE240U-4BT-R Characteristics WWW.PHIHONG.COM INPUT: Immunity AC Input Voltage Range ESD: IEC61000-4-2 Level 3 90 to 264VAC RS: IEC61000-4-3 Level 2 EFT: IEC61000-4-4 Level 2 AC Input Frequency Surge: IEC61000-4-3 Level 3 47 to 63Hz CS: IEC61000-4-3 Level 2 Voltage Dips IEC61000-4-11 AC Input Current Harmonic: IEC61000-3-2 Class A 5.0A (RMS) maximum for 90VAC 2.5A (RMS) maximum for 230VAC Insulation Resistance Primary to Secondary: >10M OHM, 500VDC Leakage Current Primary to Earth Ground: >10M OHM, 3.5mA maximum 264VAC 50Hz 500VDC AC Inrush Current FEATURES: 40A (RMS) maximum for 115VAC Over Current Protection 80A (RMS) maximum for 230VAC Output 1(OUT) <650mA Output 2(OUT) <650mA OUTPUT: Output 1 and 2 combined(OUT) <1300mA Total Output Power For 12.5K, Output 1 & 2(OUT) <1300mA 240W Over Voltage Protection 2 Ripple and Regulation 120V for <0.2 seconds 200mV max 25C, 100-240VAC Short Circuit Protection 3 Efficiency The output can be shorted permanently 75% (typical) at Max. load, 120VAC 60Hz without damage Hold-up Time LED Indicators 10mS min. 120VAC 60Hz max load Solid Green detection/connection valid & output ON ENVIRONMENTAL: Blink Red Fault Condition (over current or Temperature shorted) Operation 0C to +40C Blink Red & Green Detection is invalid Non-operation -20C to +65C Humidity 5 to 90% Input Connector IEC320 inlet 3 pin EMC Complies with FCC Class B Output Connection Complies with EN55032 Class B Female RJ45 Data input: Bottom Row Port Power/Data Output: Top Row Port Notes: 1. The specifications defined are at ambient temperature of 25C, unless otherwise specified. 2. Measured within 2 inches of RJ45 with by-pass capacitors 0.1uf/10uf at output connector terminal & oscilloscope set at 20Mhz (tested by oscilloscope. Revision 10/26/2021 3. Efficiency is measured after 30 minutes burn-in.