WWW.PHIHONG.COM 90W Single Port Power over Ethernet Midspan IEEE802.3BT Compliant Power Injector Features IEEE802.3BT Compliant 4 Pair Powering +3,6,4,5 / - 1,2,7,8 Diagnostic LEDs Full Protection OCP, OVP Compliant with Phihong Proprietary Single Source 4 Pair Power Current 12.5K Detection Sharing 1 Year Warranty Broken Wire Detection SNMP Management Option Limited Power Source Gigabit Compatible Applications Satellite Receiver Security Cameras Wireless Network Access Points Kiosks LCD Displays Computer Workstations Safety Approvals cUL/UL CE Mechanical Characteristics (Standard Model) Length: 166mm (6.53in) Height: 44mm (1.73in) Width: 80mm (3.15in) Weight: 500g(1.1lbs) Output Specifications 2 DC Load Regulation Model Output 3 Line Load Voltage Min. Max. POE90U-1BT 56V >15mA 1.6A 56VDC +1V/-2V 1 POE90U-1BT-N 56V >15mA 1.6A 56VDC +1V/-2V Notes: 1. SNMP option 2. Voltage measured within 2 of the output RJ45 connector on data pairs 3,6(+) and 1,2(-) 3. Combined output on data pairs and spare pairs. Otherwise 800mA on data pairs 3,6(+) 1, 2(-) and spare pairs 4,5(+) 7,8(-) Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 5/29/2018 POE90U-1BT Characteristics WWW.PHIHONG.COM INPUT: Isolation Test AC Input Voltage Range Primary to Secondary: 90 to 264VAC 4242VDC for 1 minute 10mA Primary to Field Ground: AC Input Voltage Rating 2121VDC for 1 minute 100 to 240VAC, 47-63Hz Immunity AC Input Current ESD: IEC61000-4-2 Level 3 2.5A (RMS) maximum for 90VAC RS: IEC61000-4-3 Level 3 1.2A (RMS) maximum for 240VAC EFT: IEC61000-4-4 Level 2 Surge: IEC61000-4-5 Level 3 Leakage Current CS: IEC61000-4-6 Level 2 3.5mA maximum 264VAC 50Hz Voltage Dips IEC61000-4-11 Harmonic: IEC61000-3-2 Class A AC Inrush Current 50A (RMS) maximum for 115VAC Insulation Resistance 75A (RMS) maximum for 230VAC Primary to Secondary: >10M OHM 500VDC Primary to Field Ground: >10M OHM OUTPUT: 500VDC Total Output Power 90W FEATURES: Over Current Protection Ripple and Regulation Output 1(OUT) <1000mA 250mV max 25C, 100-240VAC Output 2(OUT) <1000mA Output 1 and 2 combined(OUT) <2000mA Efficiency 75% (typical) at maximum load, and 120VAC Over Voltage Protection 60Hz Meets UL requirements Hold-up Time Short Circuit Protection 10mS min. 120VAC 60Hz max load The output can be shorted permanently without damage ENVIRONMENTAL: Temperature LED Indicators Operation -20C to +40C No LED - Power failure Non-operation -20C to +65C Green LED short Blinking - POE power ready Humidity 5 to 90% but no connection Green LED solid - POE output power good EMC Green/Red LED alternate short blinking - POE Complies with FCC Class B detection failure Complies with EN55032 Class B Green LED short/Red long blinking - POE output over power or short Input Connector Output Connection IEC320 inlet 3 pin +pins 3,6,4,5 / -pins 1,2,7,8 Revision 5/29/2018