WWW.PHIHONG.COM 90W Single Port Multi-Gig Power over Ethernet Midspan IEEE802.3bt Compliant Power Injector Features IEEE802.3bt Compliant 4 Pair Powering +3,6,4,5 / - 1,2,7,8 Diagnostic LEDs Full Protection OCP, OVP Compliant with Phihong Proprietary Single Source 4 Pair Power Current 12.5K Detection Sharing 1 Year Warranty Broken Wire Detection Gigabit Compatible Limited Power Source 1 Shielded DC Jacks DoE Level VI Compliant Applications Satellite Receiver Security Cameras Wireless Network Access Points Kiosks LCD Displays Computer Workstations Safety Approvals UL/cUL 60950-1 IEC60950-1 UL/cUL 62368-1 IEC62368-1 2 AS/NZ 62368 CE Mechanical Characteristics (Standard Model) Length: 166mm (6.53in) Height: 43.6mm (1.72in) Width: 80mm (3.15in) Weight: 500g(1.1lbs) Output Specifications 3 DC Load Regulation Model Data Speed Output 4 Line Load Voltage Min. Max. POE90U-1BT6-R 1G 56V >10mA 1.6A 54-57V 5 POE90U-1BT-N6-R 1G 56V >10mA 1.6A 54-57V 6 POE90U-1BT-2-R 2.5G 56V >10mA 1.6A 54-57V POE90U-1BT-5-R 5G 56V >10mA 1.6A 54-57V 6 POE90U-1BT-X-R 10G 56V >10mA 1.6A 54-57V Notes: 1. Except POE90U-1BT-N6-R 2. POE90U-1BT-2-R model only 3. Voltage measured within 2 of the output RJ45 connector on data pairs 3,6(+) and 1,2(-) 4. Combined output on data pairs and spare pairs. Otherwise 800mA on data pairs 3,6(+) 1, 2(-) and spare pairs 4,5(+) 7,8(-) 5. SNMP option. Special order MOQ 6. Special order MOQ Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 10/25/2021 1 POE90U-1BT-X Characteristics WWW.PHIHONG.COM INPUT: Isolation Test AC Input Voltage Range Primary to Secondary: 90 to 264VAC 4242VDC for 1 minute 10mA Primary to Field Ground: AC Input Voltage Rating 2121VDC for 1 minute 100 to 240VAC, 47-63Hz Immunity AC Input Current EN55024 2.5A (RMS) maximum for 90VAC IEC61000-3-2 (Harmonic) Class A 1.2A (RMS) maximum for 240VAC IEC61000-3-3 IEC61000-4-2 (ESD) 6KV Contact/8KV Air Leakage Current IEC61000-4-3 (RS) 3V/m 3.5mA maximum 264VAC 50Hz IEC61000-4-4(EFT) 1KV Input 0.5KV Output IEC61000-4-5 (Surge) 1KV L-L, 2KV L-PE AC Inrush Current IEC61000-4-6 (CS) 3V 50A (RMS) maximum for 115VAC IEC 61000-4-8 1A/m 75A (RMS) maximum for 230VAC IEC61000-4-11 (Dips) Class 3 OUTPUT: Insulation Resistance Total Output Power Primary to Secondary: >10M OHM 500VDC 90W Primary to Field Ground: >10M OHM 500VDC Ripple and Regulation 3 200mV max 25C, 100-240VAC MTBF >150,000 Hours Min, Full Load, 115VAC 2 Efficiency 25C DOE Level VI FEATURES: Hold-up Time Over Current Protection 10mS min. 120VAC 60Hz max load Output 1(OUT) <1000mA Output 2(OUT) <1000mA ENVIRONMENTAL: Output 1 and 2 combined(OUT) <2000mA Temperature Operation -20C to +40C Over Voltage Protection Non-operation -20C to +65C Voltage between 2 SELV conductors shall not Humidity 5 to 90% exceed 42.4Vpk or 60VDC for longer than 0.2seconds. Moreover a limit of 71VPK or EMC 120VDC shall not be exceeded. Latching. Complies with FCC Class B Complies with EN55032 Class B Short Circuit Protection The output can be shorted permanently without damage Notes: 1. The characteristics defined are at ambient temperature of 25C unless otherwise specified 2. Efficiency is measured after 30 minutes burn-in 3. Revision 10/25/2021