24W Desktop C8 Adapter Series Features DOE Level VI Efficiency Compliant EU CoC Tier 2 Compliant (except 5V, 5.9V, 10V, 11V models) Over Voltage, Short Circuit and Over Current Protection Non-Vented/Spill-Proof Case Class B EMI Applications Networking Peripherals Consumer Electronics Phihong Taiwan - No.568, Fuxing 3rd Rd., Guishan Dist.,Taoyuan City (33383), Taiwan, ROC Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date Phihong USA - 47800 Fremont Blvd. Fremont, CA 94538, USA specifications and contact information. Revised 10/26/2021 Phihong Europe - Wattstraat 50, 2171 TR Sassenheim, The Netherlands 1 PPL24W Series Specifications Model PPL24W-480 DC Output Voltage 48.0V Max Current 0.5A Output Output Power 24.0W Regulation 5% 2 Ripple & Noise P-P(max) 480mV AC Input Voltage Range 90 to 264VAC AC Input Frequency 47 to 63Hz Input Current 0.58A max Inrush Current 50A max., 100VAC 60A max., 230VAC No Load Power Consumption 0.05W at 115VAC Input Input No Load Power Consumption 0.07W at 230VAC Input 3 115VAC Average Efficiency 89.3% 3 230VAC Average Efficiency 88.0% 3 230VAC 10% Load Efficiency 77.3% Leakage Current <3.5A Over-Voltage 75V max Protection Short Circuit Auto-recover after short-circuit fault is removed Over-Current 1.2A max Operating Temperature 0C to +40C Non-Operating Temperature -20 to +80C Environmental Operating Humidity 20 to +80% Dielectric Withstand (HI-POT) Primary to Secondary: 3000VAC for 1min, 10mA Insulation Resistance Primary to Secondary: 10M ohm for 500VDC Standards cULus 62368-1, IEC 62368-1 Safety FCC Part 15 Class B, CAN ICES-003(B)/NMB-003(B), Approvals and EMI Emissions EN 55032/CISPR 32 Class B Conducted and Radiated EMC Harmonic Current Emissions IEC 61000-3-2 Voltage Fluctuations & Flicker IEC 61000-3-3 EN 55024/CISPR 24: IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, Immunity IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 Dimensions (L x W x H) 88.5mm (3.48in) x 50mm (1.97in) x 34mm (1.34in) Weight 170g Cable Length 1500mm DC Cable Type 22 AWG Mechanical DC Output Connector 2.1mm x 5.5mm x 10.0mm DC Plug Pin Assignment Inner (V+) / Outer GND (V-) Input Connector IEC 60320 C8 1. The specifications defined are at ambient temperature of 25C, unless otherwise specified. 2. 20MHz bandwidth frequency oscilloscope, add a 0.1F multilayer Cap. and Low ESR Electrolytic Cap. (10F) at output Notes connector terminals (nominal line voltage, full load). 3. Efficiency is measured after 30 minutes burn-in. Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 10/26/2021