PSAA60W-480 Phihong

WWW.PHIHONG.COM 60 Watt Universal 2-Wire Input Adapter PSAA60W Power Supply Meets EISA & Ecodesign Requirements Features Low Cost Non-vented/Spill-proof Case (1) Efficiency Level V Compliance No Load Power consumption <0.5W Class B EMI Low Profile Design Ecodesign ErP Directive 2009/125/EC EISA Compliant (1) level 2 annex 1b Compliant Applications Portable Equipment Networking Peripherals Gaming Machines Safety Approvals cUL/UL TUV CE Mechanical Characteristics Length: 130mm (5.12in) Height: 32mm (1.30in) Width: 60mm (2.36in) Weight: 300g (10.58oz) Output Specifications (2) Load Ripple Regulation Efficiency DC Output Model (3) Voltage Min. Max. P-P (max.) Line & Load Level PSAA60W-120 +12V 0A 5.0A 120mV 5% PSAA60W-150 +15V 0A 4.0A 150mV 5% PSAA60W-180 +18V 0A 3.3A 180mV 5% PSAA60W-240 +24V 0A 2.5A 240mV 5% PSAA60W-480 +48V 0A 1.25A 480mV 5% (1) Excludes 12V model which remains Level IV. Products not meeting requirements for Ecodesign Directive may not longer be shipped to the European Union for commercial or consumer purposes. (2) Measured after 10 minutes warm up at 25C with 12-inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in parallel. (3) 15V-48V models may be marked as Level IV despite Level V compliance. If Level V marking is required, please contact Phihong directly to ensure stock is marked accordingly. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 1/31/2012 PSAA60W Characteristics WWW.PHIHONG.COM Input: Emissions FCC Class B AC Input Voltage Rating EN55022 Class B 100 to 240V AC VCCI Class B AC Input Frequency Immunity 47 to 63Hz IEC61000-4-2 IEC61000-4-3 Input Current IEC61000-4-4 1.6A at 100V AC IEC61000-4-5 0.7A at 240V AC IEC61000-4-6 IEC61000-4-11 Leakage Current EN61000-3-2 0.25mA maximum at 254V AC and 60Hz Over-Voltage Protection Inrush Current Circuit will latch then auto-restart. 90A maximum at 100V AC 150A maximum at 240V AC Over-Current Protection Circuit will latch Input Power Saving <0.5W at no load Short-Circuit Protection Output can be shorted permanently without damage Output: Output Power Isolation 60W Primary to Secondary: 500V DC >100M OHM Efficiency Dielectric Withstand (Hi-pot) Test Meets Level V efficiency requirements Primary to Secondary: 3000V AC for 1 min., 10mA Environmental: DC Output Connector Temperature 2.1 x 5.5 x 9.5mm Center Positive Barrel Operation 0 to +40C Non-operation -20 to +80C Humidity 10 to 90% Dimension Diagram Unit: mm (inch) Type text