PSC03R-050-R Phihong

WWW.PHIHONG.COM 2.5W USB Adapter with Interchangeable Plugs PSC03R Adapter Meets CEC and EISA Requirements Features USB Socket Low Leakage Current Field Changeable AC Plugs UL 94 Vo Flammability ECOC Compliance Efficiency Level IV Compliance Applications Wireless Communications Portable Equipment Peripherals Networking Safety Approvals cUL/UL C-Tick SAA Mechanical Characteristics Length: 75.32mm (2.97in) Height: 31.67mm (1.25in) Width: 45.96mm (1.81in) Weight: 61.1g (2.16oz) Output Specifications (2) Load Ripple Regulation Efficiency DC Output (1) Model (3) Voltage Min. Max. P-P (max.) Line & Load Level PSC03R-050 5V 0A 0.5A 55mV 5% (1) Minimum order quantity of 4000 pieces (2) Measured after 10 minutes warm up at 25C with 12-inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in parallel. (3) Level IV efficient products do not qualify for CE marking and therefore cannot be sold to countries in the EU Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 11/8/2013 PSC03R Characteristics WWW.PHIHONG.COM Input: Over-Voltage Protection 8V DC maximum AC Input Voltage Rating 100 to 240V AC Over-Current Protection 0.75A maximum AC Input Voltage Range 90 to 264V AC Short-Circuit Protection Output can be shorted permanently without damage AC Input Frequency 47 to 63Hz Environmental: Input Current Temperature 0.15A (RMS) 115V AC at maximum load Operation 0 to +45C 0.08A (RMS) 230V AC at maximum load Non-operation -40 to +85C Humidity 10 to 95% Non condensing Leakage Current 0.02mA maximum at 254V AC, 50Hz Emissions FCC Part 15 Class B EN55022 Class B Inrush Current 30A for 120V AC at maximum load Immunity 50A for 240V AC at maximum load EN61000-4-2 (Cold start at ambient 25C) EN61000-4-3 EN61000-4-4 Input Power Saving EN61000-4-5 0.3W maximum, no load EN61000-4-6 EN61000-4-8 Output: EN61000-4-11 Efficiency 63% average; meets CEC level IV Dielectric Withstand (Hi-pot) Test Primary to Secondary: 3000V AC for 1 min., 10mA Hold-up Time 10mS minimum, at maximum load at 120V AC DC Output Connector Dimension Diagram Unit: mm (inch) USB Type A, receptacle, single.