SH-8ESC58AAD00S Phoenix Contact

Connectors M23 - hybrid connectors Mechanical and electrical data Mechanical data Housing material: Copper zinc alloy (CuZn), die-cast zinc (GD-Zn) Housing surface: Nickel-plated/thick layer passivated (can be coated) Insulating body: Polyamide (PA 66) Contact material: Copper zinc alloy (CuZn) Contact surface: Nickel-plated (Ni) with gold coating (Au) Contact connection method: Crimp version Sealing and O-ring: Fluorocarbon rubber (FKM) Ambient temperature: -40C ... 130C Cable entry: Cable and coupler connectors for an outer cable diameter of 7.5 - 18 mm, shielded Type of locking: M23 SPEEDCON screw locking Mech. insertion/withdrawal cycles: Default: 100 Protection class: IP67 when locked Electrical data Number of positions 13 (4+4+4+PE), CAT5 13 (8++4+PE) Contacts 4+ 4+ 4+ PE 8 + 4+ PE Contact mm 0.8 1.0 2.0 2.0 1.0 2.0 2.0 Litz wire cross sections Cable and coupler connectors: 2 Max. cable of 18 mm mm 0.08 ... 0.5 0.06 1.0 0.25 4.0 0.25 4.0 0.06 1.0 0.25 4.0 0.25 4.0 Device connectors: 2 mm 0.08 ... 0.5 0.06 1.0 0.25 4.0 0.25 4.0 0.06 1.0 0.25 4.0 0.25 4.0 1) Nominal current per contact at 25C 3.6 8 30 - 8 30 Specifications according to DIN EN 61984:2009 Rated voltage V AC/DC 50 50 630/850 - 50 630/850 Test/surge voltage kV AC 1.5 1.5 6 - 1.5 6 Surge voltage category III III 2) Pollution degree 3 3 Installation height m Up to 3000 Up to 3000 3) Cable clamping area Max. mm 18 18 1) The effective current carrying capacity must be determined using a derating curve, if necessary, according to the application. 2) The values specified assume that the connector pair is correctly locked and is only disconnected for testing and maintenance purposes. If the connector is unlocked and exposed to ambient conditions, and if there is a danger of pollution, the connector must be sealed using a protective cap IP54. 3) The cable clamping areas specified on the following pages may vary depending on the cable material/structure. Selection and testing is the responsibility of the user. 100 PHOENIX CONTACTConnectors M23 - hybrid connectors Pin assignments and coding Contact chamber numbering (view of plug-in side) Number of positions Pin Socket 5 6 6 5 8 7 7 8 2 3 3 2 13-pos., CAT5 1 4 4 1 (4 + 4 + 4 + PE) Crimp DA AD CB BC 5 6 6 5 8 7 7 8 2 3 3 2 13-pos. 1 4 4 1 (8 + 4 + PE) Crimp DA AD CB BC PHOENIX CONTACT 101 For further information and full technical data, visit phoenixcontact.net/products