69900200 PLAZMO INDUSTRIES

PLAZMO INDUSTRIES PHONE402-330-2222 FAX886-499-2235 69900200 SPECIFICATION Document No SA- 20160421-01 Version No: A Customers part No 4 Wire, 6.2 Touch Screen Product No 69900200 Issue Date 2012-04-20 1 Product type 1.1 Resistance Type Analogy Type 1.2 Film/Glass Type 2 Criteria of Materials 2.1 Uper Electrode 2.1.1 Base material: ITO FILM 2.1.2 Type: Anti-glare and anti-glare hard ring 2.1.3 Thickness: 18810m 2.1.4 Resistance: 400100/sq 2.2 Lower Electrode 2.2.1 Base material: ITO GLASS 2.2.2 Thickness: 1.100.10mm 2.2.3 Resistance: 400100/sq 2.3 Connector Tail 2.3.1 typeFPC connectDouble side 3 Characteristics 3.1 Mechanical characteristics 3.1.1 Outside dimension165.300.30 mm70.000.30 mm 3.1.2 View area153.80mm58.76mm 3.1.3 Thickness2.100.10mm 3.1.4 Input method Pen or Finger 3.1.5 Operating force 30120g A.A area shrinked within 3mm Shape of pen end: 0.3 mm 0.5mm 3.1.6 Hardness of surface Hard surface : 3H JIS K 5400 3.1.7 Heat seal intensity: X>2.0kgf Y>500gf Z>150gf Bend radius (180) 1mm 3.1.8 FPC bending resistance test bending radii: 1mm, bending times: 3 times or more than 3 tims( Satisfaction:Electrical characteristics 3.2.2 and Loop resistance) 3.2 Electrical characteristics 3.2.1 Operating VoltageDC5V 3.2.2 Loop resistance: X50-450 Y800-1250 3.2.3 linearity : 1.5 % 3.2.4 Insulation resistance: 20M At DC 25V. 3.2.5 Insulation ability: 60sec. At DC 25V. 3.2.6 Chatting times: <10ms 3.2.7 C6nf 3.3 Optical characteristics 3.3.1 Total Transmittance: 76% JISK 7105 4 Processing Environment 4.1 Operating Temperature: -20+60 4.2 Operating Humidity: 90%RH 4.3 Storage Temperature: -30+70 4.4 Storage Humidity: < 90%RH 5 Environmental test 5.1 High temperature +70240 hr. 5.2 Low temperature -20240hr. 5.3 High temp./high humidity test: 70&90%, 240hr. 5.4 High Low temperature test: -20 30min/+80 30min, This is the test of 100 Cycle with 240hr.(30min in either temperature increase or decrease). Taken out from environmental measurement machine, and placed 24hr in room temperature before test. The followings conditions are necessary Closed impedance 50< X Axis <450 800< Y Axis <1250 Linearity error X Axis1.5% Y Axis1.5% Insulation impedance 20M DC 25V 4 5.5 5.5 Notes life 210 words min Shape of pen end: R0.8mm Materials of pen: Poly acetal resin written Load:150g Speed60mm/s sliding range:A.A area shrinked within 3mm Underlined 100,000 times in a fixed position of TOUCH PANEL. If sliding back and force, it counts twice The following conditions are necessary: