Model 1825, 4897, 4899, 6545 Standard Banana Plug, Solderless and Stackable Features Designed to fit on the end of any 22 AWG to 18 AWG wire. Cross hole wire entry fits wires up to .12 (3mm) diameter. Available with tarnish resistant nickel or gold plating for very low contact resistance. Model 4899 is rated to temperatures up to +302F (+150C). Set screw simplifies assembly of test leads and jumpers by using a flat blade screwdriver. Fits standard panel and binding post banana jacks .161 to .166 (4,0mm to 4,2mm) diameter. Materials Banana Jack: Zinc Die Cast, Nickel Plated (Model 4897 is Gold Plated) Banana Plug: Body Zinc Die Cast, Nickel Plated (Model 4897 is Gold Plated) Spring Beryllium Copper, Nickel Plated (Model 4897 Gold Plated) Insulation: Polypropylene (Model 4899 is Polyphenylene Sulfide) Set Screw: Steel, Zinc Plated, 8-32 Single Slot Ratings Voltage: For CE compliance and for personal safety, do not hold in hand when voltages exceed 30 Vrms/60 Vdc. Maximum voltage for hands free use in controlled testing environments: 5000 Vrms Max. Do not use on circuits where transient stresses can exceed the rated voltage. Current: 15 Amps Maximum Operating Temperature: +122F (+50C) max. (Model 4899: +302F (+150C) max.) Ordering Information Model: 1825-color Nickel Plated Banana Plug with Polypropylene Insulation Color: 0=Black, 1=Brown, 2=Red, 3=Orange, 4=Yellow, 5=Green, 6=Blue, 7=Violet, 8=Gray, 9=White, 02=set of Black and Red Ordering example: 1825-5 (1825 with Green Polypropylene Insulation) Model: 4897-0 Gold Plated Banana Plug with Polypropylene Black Insulation Model: 4897-2 Gold Plated Banana Plug with Polypropylene Red Insulation Model: 4899-0 Nickel Plated Banana with High Temperature Black Insulation (Polyphenylene Sulfide) Model: 4899-6 Nickel Plated Banana with High Temperature Blue Insulation (Polyphenylene Sulfide) Model: 6545 Package of ten 1325, one of each color. Model: 4914 Replacement Set Screws, package of 100. U SA: Sales: 800-490-2361 All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), Technical Support: technicalsupport pomonatest.com .xxx = .005 (,127 mm). All specifications are to the latest revisions. Fax: 425-446-5844 Specifications are subject to change without notice. Registered trademarks are Europe: 31-(0) 40 2675 150 International: 425-446-5500 the property of their respective companies. Where to Buy: www.pomonaelectronics.com Copyright 2016 D1093787 Rev. 102 Page 1 of 1 X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Test Plugs & Test Jacks category: Click to view products by Pomona manufacturer: Other Similar products are found below : 01-2601-4-0210 01-2601-4-0212 01-2604-4-0212 01-2604-5-0210 01-2150-1-0312 01-2350-1-02 01-2352-1-02 01-2368-1-02 01-2604-4- 0210 01-2604-5-0212 01-2606-4-0210 01-2606-4-0212 01-2606-5-0212 M39024/10-01G M39024/10-17G M39024/11-09G M39024/11-42 M39024/11-43 M39024/12-08 707-5311 707-5402-01-19 707-5410 923739-40-I R644543000 R948161000 R999351000 1408-4 1499-101 1533-1 1659559 1659567 1663921 1663939 1696-102 174-R825B-EX NYS508-BU NYS508-O 211-101 RS100GBL RS250GBL 251- 102 25-2251-2-03 25-2259-2-03 923743-16-I 923743-24-I 923743-28-I 2854-BLU 2970-BLK 30-443G 1680