Model 4233 & 5524 with Assembly Instructions Pomona Do-It-Yourself Micrograbber & Test Clip Kits FEATURES: Ideal for connecting to small circuit board components. Use with Model s 5173, 3690, 122505A or any other Pomona Do It Yourself product to create custom cables. Supports 20 to 22 AWG wire. MATERIALS: Contact: Beryllium Copper, Alloy 165 per QQ-C-533, HM. Spring: Stainless Steel, 302. Finish: Contact Gold plated per MIL-G-45204, Type 1, Class 00. Insulation: Glass filled Nylon. Marking: POMONA GRABBER 4233. RATINGS: Operating Temperature: +102C. (+216F.) Max Operating Voltage: 150 VRMS/DC Current: 3 Amperes ORDERING INFORMATION: Model 4233-* *=Color, -0 Black, -2 Red, -1 Brown, -3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White Ordering Example: 4233-2 Adapter color is Red. ORDERING INFORMATION: Model 5524 Kit contains 10 pieces of 4233, one of each color. All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), .xxx = .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 PomonaACCESS 90592 (800) 444-6785 or (425) 446-6010 Sales: 800-490-2361 Fax: 888-403-3360 SY/EH/LS More drawings available at www.pomonaelectronics.com Technical Assistance: 800-241-2060 S: Engineering Release DataSheets FlukeDataSheet d AI 4233 5524 2 01.doc Page 1 of 2 Model 4233 & 5524 with Assembly Instructions Pomona Do-It-Yourself Micrograbber & Test Clip Kits FIGURE 1 A. Remove the cap from housing assembly, the contact will now be exposed. B. Insert the wire into the cap assembly allowing approximately 1 to 2 inches of wire to extend beyond the cap. C. Strip wire 1/8 to 3/16 inches. D. Insert exposed conductor through the hole in the contact and solder to surface. FIGURE 2 E. Important: Solder must not extend beyond the indicated width. FIGURE 3 F. Install the cap onto the housing assembly. Align the contact with the slots located on the cap. All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), .xxx = .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 PomonaACCESS 90592 (800) 444-6785 or (425) 446-6010 Sales: 800-490-2361 Fax: 888-403-3360 SY/EH/LS More drawings available at www.pomonaelectronics.com Technical Assistance: 800-241-2060 S: Engineering Release DataSheets FlukeDataSheet d AI 4233 5524 2 01.doc Page 2 of 2