Model 4531 BNC (M) with Strain Relief to Alligator Clips Features BNC Cable breakouts to Insulated Alligator Test Clips for test versatility. BNC connector and breakout wires are molded directly to the cable for added pull strength. Alligators clip jaws open up to .300 (7,62mm) Max. Schematic: Black Alligator to BNC Shell, Red Alligator to BNC Center Contact. Materials BNC: Body Brass, Nickel Plated Center Pin Brass, Gold Plated Dielectric PTFE Impedance 50 Ohms Strain Relief and Molded Breakout: PVC, Color: Black Cable: RG58C/U, Capacitance: 30.8 pF/Ft., .195 (5,0mm) O.D. Nom., Marking: POMONA ELECTRONICS 4531-C-XX Molded Breakout: PVC molded to breakout leads and cable, Color: Black Breakout Wires: 20 AWG Stranding 41 x 36 t.c., PVC Insulated, .087 (2,21 mm) O.D., Color Matches Flex Boot Color Alligator Clip: Body Steel, Nickel Plated Spring Stainless Steel Flex Boot Vinyl (Color: one Black, one Red) USA: Sales: 800-490-2361 All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), Technical Support: technicalsupport pomonatest.com .xxx = .005 (,127 mm). All specifications are to the latest revisions. Fax: 425-446-5844 Specifications are subject to change without notice. Registered trademarks are Europe: 31-(0) 40 2675 150 International: 425-446-5500 the property of their respective companies. Where to Buy: www.pomonaelectronics.com Copyright 2011 D1094182 Rev. 101 Page 1 of 2 Model 4531 BNC (M) with Strain Relief to Alligator Clips Ratings Operating Temperature: +50C (+122F) Max. Operating Voltage: Maximum voltage for hands free use: 150 VAC Max. Ordering Information Model: 4531-C-XX Length Length XX = Cable length in inches. Std. Lengths: 18 Model (inches) Tolerance (45,72cm), 24 (60,96cm), 30 (76,20cm), 36 (91,44cm), 48 (121,92cm) & 60 (152,40cm) 18 4531-C-18 +/- .50 24 4531-C-24 +/- .50 Additional lengths can be quoted upon request. 30 4531-C-30 +/- .50 36 4531-C-36 +/- 1.00 Ordering Example: 4531-C-36, Cable length will be 48 4531-C-48 +/- 1.00 36 (91,44cm) long. 60 4531-C-60 +/- 1.20 *Additional lengths greater than 60 inches are subject to a tolerance of +/- 2% of cable length. USA: Sales: 800-490-2361 All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), Technical Support: technicalsupport pomonatest.com .xxx = .005 (,127 mm). All specifications are to the latest revisions. Fax: 425-446-5844 Specifications are subject to change without notice. Registered trademarks are Europe: 31-(0) 40 2675 150 International: 425-446-5500 the property of their respective companies. Where to Buy: www.pomonaelectronics.com Copyright 2011 D1094182 Rev. 101 Page 2 of 2