PCC110/PCC210
Powerharvester Chipset
DESCRIPTION
The Powercast Powerharvester Chipset
includes the PCC110 RF to DC converter and
the PCC210 Boost Converter. The Chipset is
used in conjunction with numerous
Powercast Reference Designs, including the
P1110 and P2110 Powerharvester Modules.
The PCC110 is designed to maximize RF to FEATURES (DESIGN DEPENDENT)
DC conversion efficiency, up to 75%, while
PCC110
supporting a wide range of input power
High conversion efficiency, up to 75%
levels, load voltages, and frequency bands.
Converts low-level RF signals enabling
The PCC210 is designed to efficiently boost
long range applications
low input voltages and provide a regulated
Wide RF operating range: -17dBm to
output voltage to a load device.
+20dBm
Wide Frequency range: 100MHz to 6GHz
APPLICATIONS
Harvests from all modulation types
High-function RFID
Interoperable with numerous RF sources:
- Sensors
Powercast TX91501 series transmitter,
- Displays
RFID readers, Wi-Fi routers, etc.
- Microprocessors
SC-70 package
Battery-free wireless sensors
RoHS compliant
- Industrial Monitoring
- Smart Grid
PCC210
- Defense
High efficiency, up to 95%
- Building Automation
Operation down to 0.4V input
- Oil & Gas
Capable of 5.5V @ 50mA output
- Medical
Resistor settable output voltage
Recharging
SOT23-6 package
- Super capacitors
RoHS compliant
- Coin cells
- Thin-film cells
ORDERING INFORMATION
Low power electronics
Qualified high-volume customers can obtain
- Devices that typically last for weeks,
the Powercast Reference Design best suited
months, or years on a battery
for their application by contacting Powercast
and completing a questionnaire and a
CHIP MARKINGS
reference design confidentiality agreement:
PCC110 F1X
PCC210 P2X PCC110/PCC210
Powerharvester Chipset
IMPORTANT NOTICE
Information furnished by Powercast Corporation (Powercast) is believed to be accurate and
reliable. However, no responsibility is assumed by Powercast for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications are subject to change without notice.
No license is granted by implication or otherwise under any patent or patent rights of
Powercast. Trademarks and registered trademarks are the property of their respective owners.
POWERCAST PRODUCTS (INCLUDING HARDWARE AND/OR SOFTWARE) ARE NOT DESIGNED OR
INTENDED TO BE FAIL-SAFE, FAULT TOLERANT OR FOR USE IN ANY APPLICATION THAT COULD
LEAD TO DEATH, PERSONAL INJURY OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE
(INDIVIDUALLY AND COLLECTIVELY, CRITICAL APPLICATIONS), SUCH AS LIFE-SUPPORT OR
SAFETY DEVICES OR SYSTEMS, CLASS III MEDICAL DEVICES, NUCLEAR FACILITIES, APPLICATIONS
THAT AFFECT CONTROL OF A VEHICLE OR AIRCRAFT, APPLICATIONS RELATED TO THE
DEPLOYMENT OF AIRBAGS, OR ANY OTHER CRITICAL APPLICATIONS. CUSTOMER AGREES, PRIOR
TO USING OR DISTRIBUTING ANY SYSTEMS THAT INCORPORATE POWERCAST PRODUCTS, TO
THOROUGHLY TEST THE SAME FOR SAFETY PURPOSES. CUSTOMER ASSUMES THE SOLE RISK
AND LIABILITY OF ANY USE OF POWERCAST PRODUCTS IN CRITICAL APPLICATIONS, SUBJECT
ONLY TO APPLICABLE LAWS AND REGULATIONS GOVERNING LIMITATIONS ON PRODUCT
LIABILITY.
Powercast warrants its products in accordance with Powercasts standard warranty available at
www.powercastco.com.
PCCX10 v1.0 2013/12 2013 Powercast Corporation, All rights reserved. +1 412-455-5800
www.powercastco.com / contact@powercastco.com P a g e 2