SCALE-2 2SD300C17A2, 2SD300C17A2C 2SD300C17A2 and 2SD300C17A2C Preliminary Datasheet Dual-Channel High-quality and SCALE-2 Driver Core Abstract The SCALE-2 dual-driver core 2SD300C17A2 / 2SD300C17A2C (Coated version using ELPEGUARD SL 1307 FLZ/2 from Lackwerke Peters) is designed for applications in which high reliability is expected. The use of Power Integrations highly integrated SCALE-2 chipset allows 63% of the components to be dispensed with compared to conventional drivers. This advantage is impressively reflected in increased reliability (function and MTBF). The 2SD300C17A2(C) combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, failure soft shut down, short pulse suppression as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other secondary channel. The driver provides a gate voltage swing of 15V. An output current of 30A and 4W drive power is available per channel. Its outstanding EMC with a dv/dt strength of more than 50V/ns allows safe and reliable operation in even the demanding industrial applications Product Highlights Applications Dual channel driver IGBTs up to 1700V Highly integrated SCALE-2 chipset Switching frequency up to 60kHz Gate current 30A 4W output power per channel Direct and half-bridge mode IGBT short-circuit protection Failure soft shut down Isolated DC/DC converter Safe isolation to EN 50178 UL compliant Reliable, long service life Lead free www.power.com/igbt-driver Page 1 SCALE-2 2SD300C17A2, 2SD300C17A2C Preliminary Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and important information that apply to this product, please refer to 2SD300C17 Description & Application Manual on www.power.com/igbt-driver/go/2SD300C17. Absolute Maximum Ratings Parameter Remarks Min Max Unit Supply voltage V VDC to GND 0 16 V DC Supply voltage V VDD to GND 0 16 V DD Logic input voltages INA, INB and Mod to GND -0.5 20 V Logic output voltages SOA and SOB to GND -0.5 VDD+0.5 V SOx current Failure condition, total current 20 mA Gate peak current I Note 1 -30 +30 A out Gate resistance Turn-on and turn-off 1 IGBT gate charge 50 C Average supply current I Notes 2, 3 540 mA DC Output power Ambient temperature 70C (Notes 4, 5) 4 W Ambient temperature 85C (Note 4) 3 W Switching frequency f 60 kHz Test voltage (50Hz/1min.) Primary to secondary (Note 11) 5000 V AC(eff) Secondary to secondary (Note 11) 4000 V AC(eff) dV/dt Rate of change of input to output voltage 50 kV/s Operating voltage Primary and secondary to secondary side 1700 V peak Operating temperature Note 5 -40 85 C Storage temperature Note 14 -40 50 C Surface temperature Only for 2SD300C17A2C (Note 15) 125 C www.power.com/igbt-driver Page 2