FPS 4-T220 0R010 S 1% Q Powertron

FPS 4-T220 FEATURES Resistances from 0.002Ohm to 10Ohms Power Rating to 15Watt Resistance Tolerances to 0.1% TCR to 25ppm/K Load Stability to 0.1% SMD D2Pak TABLE 1SPECIFICATIONS TYPE FPS 4-T220 Resistance Range 0.002 to 10 Ohms Free air 70C 1.5W Power Rating With heatsink 15W Tolerances from 0.002 Ohms 1% / 2% / 5% from 0.01 Ohms 0.1% / 0.25% / 0.5% / 1% / 2% / 5% Thermal Resistance 4.8 K/W 0.1% / 0.2% / 0.5% Stability (1000h) (depends on stress) Temperature Coefficient Standard (Q) 25 ppm/K (20 to 60C) Extended Temperature Range (R) 50 ppm/K (-40 to 130C) other specifications upon request Voltage Proof 300 VDC Maximum Current 50A Thermal EMF < 1V/K Operating Temperature Range -40 to 130C Resistor Material CuNiMn-Foil Substrate Anodized aluminium Backplate Copper / Nickel-plated Housing PPS Connector Material Cu / tinned lead free soldering time above 220C max. 90 s Soldering Profile max. temperature 245C and JEDEC-J-STD-020 Terminals 4 (standard contact S) ORDERING INFORMATION Part Number - Resistance - Contact - Tolerance - TCR FPS 4-T220 0R010 S 0.1% Q Document No.: 64233 For technical questions, www.powertron.de Revision: 15-06-2016 contact powertron vpgsensors.com 1FPS 4-T220 FIGURE 1TEMPERATURE COEFFICIENT 2000 0 Limit 2 -2000 -4000 Nominal R/R -6000 -8000 Limit 1 -10000 -40 -20 0 20 40 60 80 100 120 140 Temperature (C) FIGURE 2DERATING Power Rating Notes - The FPS Series Resistors must be attached to a suitable heat- 120 sink. The maximum internal resistor temperature is 130C. 0.5% To specify an appropriate heatsink use the following formula : 100 0.2% 80 0.1% R = T - ( P x R ) - T 60 qH MAX qR A 40 P 20 Where: R = Thermal Resistance of Heatsink ( K/W ) qH 0 R = Thermal Resistance of Resistor ( K/W ) qR 25 50 85 100 115 130 T = Maximum Temperature of Resistor MAX Temperature of the backplate (C) T = Ambient Temperature of Heatsink ( C ) A P = Power Through Resistor ( W ) FIGURE 3DIMENSIONS in mm (inches) Dimension A 0.2 (0.008) 12.70 (0.50) B 0.2 (0.008) 10.16 (0.40) Dimension C 0.1 (0.004) 0.76 (0.03) A 12.10 (0.476) D 0.1 (0.004) 2.54 (0.10) B 11.16 (0.439) E 0.1 (0.004) 7.62 (0.30) C 18.33 (0.722) F 0.1 (0.004) 4.00 (0.16) D 7.62 (0.300) G 0.1 (0.004) 1.20 (0.05) E 2.54 (0.100) H 0.2 (0.008) 14.60 (0.57) F 1.76 (0.069) I 0.2 (0.008) 15.00 (0.59) G 3.20 (0.126) J 0.2 (0.008) 17.33 (0.68) K 0.1 (0.004) 0.40 (0.20) L 0.1 (0.004) 1.85 (0.07) www.powertron.de For technical questions, Document No.: 64233 2 contact powertron vpgsensors.com Revision: 15-06-2016 Power ( % from nominal power) R/R (ppm)