1 SCOPE This specification defines the technical requirements of TZ-D series thermal-link that are produced according to TZ-D series thermal-link. 2 MATERIAL& STRUCTURE 1 2 3 4 6 5 3 PRODUCT APPEARANCE & DIMENSION A CCCH B 250V 2A C RH 130 L 3.1 Product Appearance Printing content shall contain Trade Mark, Type, Rated Temperature, Rated Voltage, Rated Current, Safety Approval Logo. Marking shall be legible. Sealing Resin should be spread evenly filled. Tin plated layer of lead wire is good, without oxidation black spots. Shell without damage, perforated. 3.2 Product Dimension Dimension A B C L According to the 9.5 2.8 0.5 customer requirement 4 TEMPERATURE CHARACTERISTICS Maximum Holding Temp. Rated Rated Safety Approvals Temp. Limit Rated Fusing-off T () T () Voltage Current h m Type Functioni ng Temp. ACV A Temp. T () () TUV VDE 2A CCC f TZ-D-75 75 721 55 130 TZ-D-85 85 802 62 130 TZ-D-92 92 872 65 130 TZ-D-100 100 972 75 150 TZ-D-105 105 1002 75 150 TZ-D-115 115 1112 87 150 250 2,3 TZ-D-125 125 1212 95 150 TZ-D-130 130 1261 102 150 TZ-D-135 135 1301 105 150 TZ-D-140 140 1361 110 160 TZ-D-145 145 1401 114 180 TZ-D-150 150 1451 115 180 Denotes for Approved 5 TEST EQUIPMENT AND TEST ITEM 5.1 Test Equipment 1.Heater 2.Stirrer 3.Oil Bath 4.Light-emitting Diode 5.Current-limiting Resistance 6.Thermometer 7.Sample