1. SCOPE This specification defines the technical requirements of TZ-P series thermal-link that are produced according to Relative Humidity series thermal-link. 2. MATERIAL& STRUCTURE 1 4 2 5 3 6 1.Fusing Agent 2.Fusing Point 3.Lead Wire 4. Brass Solder 5.Plastic Shell 6. Epoxy Sealing 3.PRODUCT APPEARANCE Printing content shall contain Trade Mark, Type, Rated Temperature, Rated Voltage, Rated Current, Safety Approval Logo. Marking shall be legible. Sealing Resin should be spread evenly filled. Tin plated layer of lead wire is good, without oxidation black spots. Shell without damage, perforated. 4. DIMENSION & TEMPERATURE PERFORMANCES 4.1 DIMENSION mm A B C D 7.0 6.0 2.7 According to the 6.1 6.0 2.7 customer requirement 4.4 5.3 2.2 4.2 Temperature Characteristics Safety Approvals Rated Rated Holding Maximum Rated Fusing-off Type Functioning Temp. Temp. Limit Voltage Current Temp. Temp. T () T () TUV VDE CCC h m ACV A () T () f TZ-P75 75 732 48 130 TZ-P80 80 752 58 130 TZ-P85 85 802 55 130 TZ-P90 90 872 60 130 TZ-P92 92 852 65 130 TZ-P98 98 962 70 130 TZ-P100 100 972 72 130 TZ-P102 102 982 72 150 TZ-P105 105 1002 75 150 TZ-P110 110 1052 80 150 TZ-P115 115 1112 87 150 250 1,2,3 TZ-P120 120 1152 90 150 TZ-P125 125 1212 90 180 TZ-P130 130 1261 92 180 TZ-P135 135 1301 95 180 TZ-P140 140 1361 102 180 TZ-P145 145 1401 105 180 TZ-P150 150 1451 115 180 TZ-P152 152 1471 115 180 TZ-P160 160 1551 125 190 TZ-P170 170 1651 135 200 TZ-P180 180 1751 145 200 Denotes for Approved Denotes for pending