1429 Pro Power

Split Loom Flame Retardant Polyethylene, Gray Description: Flexible convoluted tubing / conduit manufactured from a flame retardant polyethylene resin. Characteristics: Flexibility : Excellent Abrasion Resistance : Good Chemical Resistance : Good Operating Temperature : -40C to +93C (-40F to 200F) Typical Physical Properties Test Method Value Units Specific Gravity/Density ASTM D792 1.005 - Elongation Break ASTM D638 945 % Elongation Yield ASTM D638 167 % Tensile Strength 25C ASTM D638 14.99619 MPa 2% Secant Modulus - - - Flexural Modulus ASTM D790 240 MPa Melting Point ASTM D3418 239 (115) F (C) Notched Izod Impact Test ASTM D256 10 ft lb/in Heat Deflection Temperature 66psi ASTM D648 104 (40) F (C) Heat Deflection Temperature 264psi ASTM D648 122 (50) F (C) www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 30/04/14 V1.1Split Loom Flame Retardant Polyethylene, Gray Product Dimensions: Dimension A Dimension B Dim. C Nominal ID Dia. I.D. O.D. Part Number Wall Diameter Code Min. Min. Max. Min. Max. 1429 1/4 (6mm) 014 6.02 (0.237) 6.76 (0.266) 9.45 (0.372) 10.16 (0.4) 0.11 (0.004) 1430 3/8 (9mm) 038 8.66 (0.341) 9.65 (0.38) 12.59 (0.496) 13.36 (0.526) 0.12 (0.005) 1431 1/2 (13mm) 012 12.01 (0.473) 13.11 (0.516) 16.87 (0.664) 17.78 (0.7) 0.12 (0.005) 1432 5/8 (16mm) 058 15.32 (0.603) 16.23 (0.639) 20.36 (0.802) 21.26 (0.837) 0.12 (0.005) 1433 3/4 (19mm) 034 17.96 (0.707) 19.28 (0.759) 24.13 (0.95) 25.12 (0.989) 0.12 (0.005) 1434 1 (25mm) 100 25.91 (1.02) 27.16 (1.069) 31.78 (1.251) 33.13 (1.304) 0.15 (0.006) Dimensions : Millimetres (Inches) Note: (A) Product tolerances are general and are designed to encompass all available materials. Tighter tolerances may be available for a specific material. (B) Product with an I.D.>1.5 will not meet the std. Cut length tolerances listed above. Special cut length tolerance will be given on a case to case basis. Dimension D Cut-To-Length Specifications Less than or equal to 400mm Greater than 400mm +/- 10mm +/- 2.5% of target length Part Number Table Description Part Number 1/4 Gray Flame Retardant Polyethylene Split Loom 1429 3/8 Gray Flame Retardant Polyethylene Split Loom 1430 1/2 Gray Flame Retardant Polyethylene Split Loom 1431 5/8 Gray Flame Retardant Polyethylene Split Loom 1432 3/4 Gray Flame Retardant Polyethylene Split Loom 1433 1 Gray Flame Retardant Polyethylene Split Loom 1434 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 30/04/14 V1.1