241/69/79B Pro Power

GRADE COL Min UL 94 RTI H H H D C Thk Flame C W A V 4 T mm Class I I T 9 I EL WI WOI R 5 DSM Engineering Plastics E47960 Akulon PA 66 S223-DH, S223-EH, S223-FH All 0.71 HB 130 100 130 4 0 1 - - All 1.5 V-2 130 100 130 4 0 0 - - All 3.0 V-2 130 100 130 2 0 0 6 0 S223-E All 0,4 V-2 65 65 65 - - - - - All 1.5 V-2 65 65 65 4 0 0 - - All 3.0 V-2 65 65 65 3 0 0 7 0 S223-F All 1.5 V-2 65 65 65 4 0 0 - - All 3.0 V-2 65 65 65 3 0 0 7 0 S225-KS (h2)(j1) All 0.38 V-0 65 65 65 - - - - - All 0.75 V-0 130 90 120 4 0 - - - All 1.5 V-0 130 90 120 4 0 - - - All 3.0 V-0 130 90 120 3 0 0 5 0 S240-C NC 3.0 V-2 65 65 65 2 0 0 5 0 S240-CH NC 3.0 V-2 65 65 65 - - - - - (h2) Virgin and regrind, from 1% to 50% by weight inclusive, have the same basic material characteristics, except for HWI (j1) Virgin and regrind, from 1% to 100% by weight inclusive, have the same basic characteristics with respect to Flammability. March 03 Yellow card ratings Page 1/1 DSM Engineering Plastics - Property Data Akulon S223-F PA66 Low/Medium Viscosity Properties Typical Data Unit Test Method MECHANICAL PROPERTIES dry / cond Tensile modulus 3400 / 1500 MPa ISO 527-1/-2 Yield stress 90 / 60 MPa ISO 527-1/-2 Yield strain 3.5 / 20 % ISO 527-1/-2 Nominal strain at break 40 / >50 % ISO 527-1/-2 Charpy impact strength (+23C) N / N kJ/m ISO 179/1eU Charpy impact strength (-30C) N / N kJ/m ISO 179/1eU Charpy notched impact strength (+23C) 7 / 14 kJ/m ISO 179/1eA Charpy notched impact strength (-30C) 7 / 7 kJ/m ISO 179/1eA THERMAL PROPERTIES dry / cond Melting temperature (10C/min) 260 / * C ISO 11357-1/-3 Temp. of deflection under load (1.80 MPa) 75 / * C ISO 75-1/-2 Temp. of deflection under load (0.45 MPa) 220 / * C ISO 75-1/-2 Coeff. of linear therm. expansion (parallel) 1 / * E-4/C ISO 11359-1/-2 Coeff. of linear therm. expansion (normal) 1 / * E-4/C ISO 11359-1/-2 Burning Behav. at 1.6 mm nom. thickn. V-2 / * class IEC 60695-11-10 Thickness tested 1.5 / * mm IEC 60695-11-10 Burning Behav. at thickness h V-2 / * class IEC 60695-11-10 Thickness tested 3 / * mm IEC 60695-11-10 ELECTRICAL PROPERTIES dry / cond Relative permittivity (100Hz) 3.2 / 10 - IEC 60250 Relative permittivity (1 MHz) 3 / 4 - IEC 60250 Dissipation factor (100 Hz) 60 / 1400 E-4 IEC 60250 Dissipation factor (1 MHz) 170 / 1000 E-4 IEC 60250 Volume resistivity 1E13 / 1E10 Ohm*m IEC 60093 Surface resistivity * / 1E14 Ohm IEC 60093 Electric strength 25 / 20 kV/mm IEC 60243-1 Comparative tracking index 600 / 600 - IEC 60112 OTHER PROPERTIES dry / cond Water absorption 9 / * % Sim. to ISO 62 Humidity absorption 2.4 / * % Sim. to ISO 62 Density 1140 / - kg/m ISO 1183 10.03.2004 FOR INTERNAL USE ONLY All information supplied by or on behalf of DSM in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but DSM assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the aforementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use of all such information.